Bottling Plant Dealers in Andheri, Mumbai (56 products available)

Compact and highly efficient, this Rotary Semi Automatic Bottle Washing Machine has geneva cam mechanism. The machine is comprised of two nos. SS tanks and pumps, that ensures speedy washing of bottles. Further, a separate panel control is installed in the machine so as to shun any short circuit owing to spraying of water. Easy loading and unloading, simple operations and effortless maintenance, makes this machine highly demanded in the market.   Features Easy operation Easy loading and unloading Output : 100 bottles per minute Manual loading & unloading Machine with Geneva cam mechanism Application Suitable for washing various types of bottles ranging from: 15 ml. to 500ml.   SALIENT FEATURES   Geneva mechanism. Three inner, one outer and one air wash Sequence of washes to customer’ s choice . Out put : 64 to 100 bottles per minute. Easy operation. Stationary nozzles eliminate contamination of water cycles. Individual solenoid valve for each washing sequence , which eliminates carbon plate and other accessories reduce leakage and maintenance to minimum. Higher capacity centrifugal pumps to wash bigger bottles (500&1000 ml.) The stationary nozzles avoid chipping of bottle necks . Pumps and tanks are mounted on portable stand for easy maintenance . Bottle guide system specially for light weight bottle. Separate panel control to avid any short circuit due to spraying of water.

• Driven Type: Electric
• Model: NAPF-1
• Number Of Filling Heads: Single Head
• Usage/Application: Industrial
• Air Consumption: 4 to 6 kg pressure
• Height of Conveyor: 860 mm (+ 50 mm adjustable height) 

APPLICATION : To generate WFI water for injection / Large volume of Parenteral. CAPACITY : 50 to 2500 Ltrs. TECHNICAL SPECIFICATION : Distillate -  IP/BP/USP specifications compliance. Distillate Temperature 95ºC Conductivity : Less than 0.5µ Siemens/cm. Endotoxing – Less than 0.25 Eu./ml. TOC – 100 PPB FEED WATER Purified water with max. conductivity of 0.5 micromhos/cm. should be used. Pressure should be 1 kg/cm² higher than the in feed steam pressure. Temperature – Ambient 30ºC COOLING WATER Normal tap water is used Provided hardness is less than 90 PPM of CaCo3. Temperature – Ambient 30ºC STEAM Steam must be saturated, dry free from oil, vapors and other impurities.(A steam filter to obtain 3µ, clear quality steam is recommended ask for details) Pressure –min steam pressure of 3 kg./cm² is essential to guarantee pyrogen-free distillate. OPERATION : To feed purified water & heat with boiler steam & generate clean steam and condense with cool water which is WFI. FEATURES : Energy Saving - Low operating cost. Compact Design - Space saving. All contact parts are S. S 316L and all joints are sealed with Teflon Gasket. Fully Automatic operation - No Attendant required. ADVANTAGES : Save water consumption & Boiler steam consumption. Complete close loop system. No air contamination. On line conductivity. If sub standard conductivity will come dumping automatically through 3 way valve

Aerosol can crimping and gas as well as spray can filling machine manufacturers, exporters and suppliers in Mumbai, India to all around the world. Aerosol can, gas and spray filling and crimping machine in flexible price as per ISO standards and certified international specifications from more than 5 decades with required industrial features and characteristics to full fill the performance expectation without investing too much price and efforts with Swastik professional and technical assistant. Machine Applications Aerosol Can Crimping Machine Deodorant Crimping & Spray Filling Aerosol Can and Gas Filling

Then Anion Resins Column (OH form), which absorbs these acids and finally gives De mineralized (Deionized) water. When resins are exhausted - the cations Resins are regenerated with Hydrochloric acid (Hcl) and the Anion resins are regenerated by caustic Soda (NaOH) solution. So the same resins can be used over and over again to produce the DM water.

• Automatic Grade: Automatic
• Container Type: Bottle
• Voltage: 220 V
• Brand Name: PCM
• Country of Origin: Made in India
• Power Source: Electric
• Material: SS
• Phase: Three Phase
• Capacity: 2000 Bottles/hour
• Usage/Application: Industrial

• Brand Name: Unisource
• Voltage: 440 V
• Country of Origin: Made in India
• Capacity: 10 Packs per min
• Air Pressure: 6 Bar
• Automation Grade: Automatic
• Phase: Three Phase
• Power Source: Electric
• Frequency: 50 Hz
• Surface Finish: Polished

We Offer for High-performing bottle Filling Machine, You Can Undoubtedly Rely On Us. We Present Automatic Liquid Bottle Filling Machine that Has Acquired Filling Applications in Pharmaceutical Industries. Bottle Filling Machine is Used to Fill Bottles of Syrups, Liquids, Solutions Etc. We Fabricate Filling Machines Using Good Quality Raw Materials that Assure Our Clients of Our Credibility. Good Functioning, Easy Operation, High Performance and Long Life are the Buzzwords that Best Describe the Bottle Filling Machine Available with Us. We are Acknowledged as One of the Topmost Automatic Volumetric Liquid Bottle Filling Machine, Manufacturers from India. description automatic Volumetric Liquid Bottle Filling Machine Work On Volumetric Principle with Diving Nozzles. the Unit is Made Compact, Versatile & Enclosed in Stainless Steel Elegantly Matt Finished Body, Consist of S.s. Salt Conveyor, Reciprocating Nozzle with Self Centering Devices and S.s. Syringe. No Container No Filling System Arrangement is Standard Features of the Machine. the Main Drive of the Machine and Conveyor drives Consist of A/c Motor with A/c Frequency Drive. operation containers Moving On S.s. Slat Conveyor, Feed Below the Filling Nozzles Through a Twin Pusher System. the Twin Pusher System and Reciprocating Nozzles are Precisely Matched for Centering of Container Below Nozzles, to Avoid Spillage of Liquid On Container, to Minimize Foaming Adjustable Nozzles Will Reciprocate According to Filling Doze, Nozzle Will Go Upwards Slowly from Bottom Level of Bottle Towards Neck During Filling. the Dosing Block with a Hexagonal Bolt Fitted Below Syringes. this Means Different Fill Size Can Be Easily Set. salient Features +- 1% Filling Accuracy On Single Dose. no Bottle No Filling System rigid Vibration Free Construction for Trouble Free Performance. s.s. Elegantly Matt Finished Body. elegant and Easy Control Panel for Total Control On Operation. minimum Change Overtime, from One Size to Another Container or Fill Size. self Lubrication Uhmw-pe Guide Profile for Ss Slat Chain Provides Low Friction Wear Surface, Smooth and Noiseless Conveying. error Code Display On Ac Frequency Drive On Control Panel. drain Tray Around Machine Platform. drip Tray Under the Conveyor. pneumatic Bottles Stopping Arrangement. optional Feature automatic Chain Washing System for Conveyor Belt. in-built Pre-inspection. acrylic Cabinate. acrylic Cover On Conveyor. nitrogen Flushing. float Tank ( Holding Tank) with or Without Stirrer. Please Contact Us.

Description :-Semi Automatic electric operated having filling cap. 50 to 300ml. Complete stainless steel body.With single syringeWith double syringe

Glass bottles after recovery from the market require a through and consistent cleaning with detergent and heated water. To fulfill this purpose and ensure highest level of cleaning we supply a Single or Multi Soak bottle washer based on plant capacity and the clients need. The bottle is loaded into the machine by a Positive automatic chain loader which lifts the bottle from conveyor magazine in to the bottle carrier. The Profile of the carrier is designed for smooth handling of the bottles without scouring or scratching them. The bottle first enters into the pre-soak compartment where all the dirt and loose impurity is loosened and removed due to alkali action. The high pressure alkali wash removes all the loose impurities leaving the bottle clean and sterile. The long length provided after final wash allows the bottles to drain, completely before discharging on the conveyor table. Based on capacity and requirement the washing cycle may defer as the number of soaking chambers will change. Synchronized moving Jet mechanism ensures definite cleaning of the bottles. High efficiency steam coils are provided in the tank into heat the water and temperature is controlled by temperature controllers. Rotary type controlled gravity bottles discharge & deliver the washed bottle on the moving conveyor through rotary cam mechanism. The carriers can be easily replaced and snap assembled (without screws) into the chain pockets.

• Compressed Air Required: 8 CFM at 6 bar pressure
• Model: IPM-CFM
• Filling Capacity (Range): 5 gm - 1 Kg
• Output Speed: 20 - 100 Pouches / min. (Depends on material, Weight and Pouch size)
• Control: PLC Controlled
• Packaging Material: Laminated Film
• Reel core diameter: 70-76mm
• Roll Holding: Pneumatic shaft
• Maximum Roll Weight: 45kg or Ø 500mm
• Electricity Required: 420V, 3Ph, 50Hz
• Dimension (Approximate): 1000(W) x 1200(L) x 2550 (H)
• Machine weight: 500Kg (Approx.)

• Condition: New
• Automatic Grade: Automatic
• Usage: Bottle Water, Soft Drink
• Corrosion Resistant: Yes

• Condition: New
• Driven Type: Electric
• Brand Name: RIDDHI
• Automatic Grade: Semi-Automatic
• Machine Capacity: 60-240 bottles/min
• Dimension(L*W*H): AS PER SIZE
• Material: SS
• Bottle Size (Litre): 10 ML TO 1 LITRES
• Filling Range (millilitre): 10-1000 ML
• Power (Kilowatt): 1.5 KW
• Voltage (volt): 410 VOLTS
• Weight (kilogram): 120
• Production (Bottles/Hour): 20 TO 40 BPM
• Model No.: RDVLFM
• Capacity (per hour): 1200
• Material Grade: SS
• No. Of Heads: 2

Aqasion is a pioneer of water treatment plant in Asian nation with a inheritance spanning over 5 decades, we tend to are recognized internationally as a premier company in water and setting management. We are among the biggest setting solutions suppliers, one amongst only a few corporations worldwide with a whole vary of technologies, merchandise and services. this allows indian company to supply total solutions for each sector of water treatment With sales, production and repair footprints across the world, we tend to serve our markets with a sustained targeted client satisfaction, technological innovation and dedicated service. Our capability to deliver comprehensive solutions with complete technical support makes Aqasion leader in water gtreatment plant.

Grey Water Recycling Plant, automatic backwash filters, Cartridges

A water chiller[1] is a mechanical device used to facilitate heat exchange from water to a refrigerant in a closed loop system. The refrigerant is then pumped to a location where the waste heat is transferred to the atmosphere. In hydroponics, pumps, lights and ambient heat can warm the reservoir water temperatures, leading to plant root and health problems. For ideal plant health, a chiller can be used to lower the water temperature below ambient level; 68°F (20°C) is a good temperature for most plants. This results in healthy root production and efficient absorption of nutrients. In air conditioning, chilled water is often used to cool a building's air and equipment, especially in situations where many individual rooms must be controlled separately, such as a hotel. A chiller lowers water temperature to between 40° and 45°F before the water is pumped to the location to be cooled.

We are offering sewage water treatment plant with mbbr and mbr technologies. Waster water treatment plants for cities, towns, hotels, malls hospitals etc.

• Phase: Three Phase
• Automation Grade: Semi-Automatic
• Body Material: Stainless Steel
• Usage/Application: Water Cooling
• Capacity: 1 ton

We are an eminent and leading trader of powder filling machine.

RaviKiran is a renowned Multicolumn Distillation Plant Manufacturers in India that is designed to produce sterile, pyrogen free distilled water conforming to I.P.B.P.USP & LAL test specifications with conductivity of 0.2 - 0.3 microsemenscm² suitable for the use in preparation of injections and I.V. Fluids. It is provided with an electronicPLC based fully automatic panel board and is available in various output capacities from 50 ltrshr to 3000 ltrshr. Injectable Section:-Manufacturer and Supplier of Multicolumn Distillation Plant that is designed to produce sterile, pyrogen free distilled water conforming to I.P.B.P.USP & LAL test specifications with conductivity of 0.2 - 0.3 microsemenscm² suitable for the use in preparation of injections and I.V. Fluids.

Bottle washing machine is with high performance, rust resistance, excellent functionality we provide customized options for washing series. Washing of bottles take place with five various washing type with 10 nozzles for optimum washing, our technicians take quality material for proper wash of bottle, all machine parts and jets are made from SS 316 tools. It is manufactured with rough stainless steel, which is highly used in several ceramic, chemical, food products industries.   SALIENT FEATURES : • The structure is made of SS 304. • The contact parts such as washing nozzle, washing pump impeller, tanks, cup/bottle holder plate are made of Stainless Steel 304. • The tanks capacity is 75 litres each. • Pumps and tanks are mounted on portable stand for easy maintenance and cleaning purpose. • Stationary nozzles to eliminate contamination of water cycles. • Four inner wash (Included one air wash , two inner wash with recycled tray) & one outer wash •Individual solenoid valve use for each wash - which eliminates carbon plate and other accessories. This is to avoid leakages and minimize the maintenance ratio. • Bottle guide system especially for lightweight bottle. • SS glycerin fill pressure meter.

The plant consists of: 1 complete neutralization tank agitator solutions to neutralize # 1 filter press with pneumatic pump   The press is used for the filtration of the neutralized solutions and retain the oxides of copper, zinc etc. destined to companies authorized to process them.   The structures of the filter press, from smallest to largest, are of the monolithic type, realized in carpentry and subjected to electro-mechanical controls and accurate machining. In the design we were considered unitary stresses in the materials contained within very low values, even at maximum operating pressure. The heads and the longitudinal members are coated stainless steel or other materials according to the chemical characteristics of the liquid to be filtered. In the filtering elements, the fabric, the shape and dimensions of the plates, as well as the materials used, they represent the most important part. The selection of these items is the result of years of experience of those who know these problems. The pump is equipped with electronic control by means of the probe level for the drive and the automatic shutdown.

Water Treatment Plants, Effluent Water Treatment Plant

Pharmaceutical Chemicals

water filling plant, Cooling Towers, juice plant, Chilling Plant

Bottling Machinery