Dust Extractors Dealers in Mumbai (11 products available)

The machine consists of an impeller enclosed in an impeller housing with a suction and exhaust port. As the impeller rotates at a high speed, a partial vacuum is created in the impeller housing and atmospheric air is sucked in from the suction port and exhausted from the exhaust port. This air suction is used for doing useful work. The machine is basically a vacuum cleaner, the suction side of which is used to cleaning purpose. It is connected to the tablet / polishing machine by a hosepipe from where the dedusted powder is sucked out and collected.   Salient Features: Machine provided with wheels for easy maneuverability. Compact size with minimum floor area occupation. Very little maintenance required except periodic cleaning.

• Weight: 175 kg
• Phase: 3 Phase
• Voltage: 380-440 V
• Frequency: 50-60 Hz
• Material: SS
• Brand: Pharmafill
• Vacuum Flow: 100-200 CFM
• Motor Power: 2 HP
• Dimensions: 620 x 480 x 1230 mm

The Model 40002FMS STREAM VAC™ is a versatile and affordable compact air cleaning system is ideal for the removal of fumes, dust and other air pollution from work stations without the need for heavy and bulky machinery. The Nex Flow™ Stream Vac™ is an in line air conveyor that when hooked up to a 2" hose up to 25 feet (8 meters) and connected to a compressed air line, it will remove up to several hundred cubic feet of air while using only a minimal amount of compressed air, taking with it welding fumes, soldering fumes, particulate from local grinding operations, smoke and particulate from almost any "spot" application. FEATURES No moving parts. Driven by air Not electricity. Compact and Portable - easy to install. BENEFITS Maintenance Free Safe - No Electricity Easy Installation Portable

Dust Extractor is used to prevent dust accumulation and avoid cross contamination in pharmaceutical industry, when tablets are being manufactured. When used this tableting dust collector, it helps reducing the mechanical strain on the tablet making machine through dust removal from the punches and dies. When dust accumulation is avoided on the dies, breakdowns are minimized and efficiency increased. Dust extractor machine has a very effective shaking mechanism useful in dislodging the dust which is then removed off by the fans of dust collection system. The Fan and filter compartments are also accessible through a door for ease of inspection and maintenance. Salient Features : • All contact parts are stainless steel 304. • Blower fan is dynamically balanced for noiseless & steady performance. • Easily mobile, fitted with castor wheels. • Helpful to overcome dust hazards as well as cross contamination during tablet compression. • Minimizes mechanical strain & excessive wear of tablet press, thus minimum breakdown problem of tablet press as well as less wear & tear of punches. • Inlet manifolds and dust collection tray are made of SS 304. • Plain flexible hoses from inside for ease in cleaning. • Four inlet manifolds are provided to connect any tablet press and two De-dusting. • Models are available in 150 cfm, 300 cfm & 1000 cfm Suction Capacity.

• Power: :
• Parameter                           Description: Suction Capacity
• :: 300 C.F.M. (500 m3 / hr) at 125 mm W.G.
• Filtration Area: :
• 0.36 m2per bag.: No of filtration bags
• :: 6 nos.
• Dust Storage Capacity: :
• 40Ltrs.: Inlet Manifolds (Six)
• :: Dia 50 mm – 02 Nos. Dia 38 mm – 4 Nos.
• 2 HP / 2880 RPM / 3 Phase / 440 V / 50 Hz: Overall Dimensions
• :: 600 x 780 x 1500 H
•  :  

• Model: Smms - 500 - Elevating
• Max Tablet Diameter: Up to 40mm
• Min Tablet Diameter: 5mm
• Power Supply: 0.5HP, Single Phase, AC

• Motor Drive: 2HP, 380/440V,3Ph, 50 Hz
• Vacuum Flow: 100 CFM
• Dimensions L x H x W: 620mm x 480mm X 1230mm
• Approximate Weight: 110 Kgs

Riddhi Strongly recommends the use of Dust Extractor Unit with all the Rotary Tabletting Machines in order to control the flying dust generated during the compression of tablets. With the use of this unit, dust in Tabletting Machines is kept to minimum but it is difficult to eliminate it entirely.

Chip extractors most economical & effective solution to your dust problems. Chip or dust collected is transferred by a heavy duty steel fabricated fan. These extractors are available in stand alone option or on trolley mounting depending on requirement. The ingeniously contrived positioning of the dust collecting hood catches the dust catapulted upwards in its complete scattering area. Whenever, Dust different locations, a portable dust & chip collector is the most economical answer. All portable units with cyclonic separators have exchangeable filter systems for use with a simple filter bag. Filtrations Options other than filter bags such as Cellulose Pleated filters & Hepa filters are available on request.APPLICATION :a) For Extraction and disposal of dust produced by machinery, directly at source.b) For Extraction and disposal of car exhaust fumes in automotive workshops.c) Extraction of stale air and supply of fresh air for working operations (e.g. welding) in pits, tanks or other insufficiently ventilated confined area.d) Extraction of dust in small sand blasting cabins.e) Use as conveyor blower for granulated materials, etc., ON WOOD WORKING MACHINERY.

This Dust Collector is specially made for the Blister Packing during the packing of un-coated tablets.It’s used for collecting loose powder from capsule polishing chamber.  

Wooden Dust Extractor, Vane Axial Fans, Tubular Axial Fans