Finned Tubes Dealers in Mumbai

We are offering premium quality Copper Finned Tubes to the clients. The Copper Finned Tube is an integral extended surface tube having helical fins on the outside. The Copper Finned Tubes offered by us are designed primarily for Shell and Tube heat Exchanger application, for increasing the efficiency and reducing the case. The Copper Finned Tubes are available in variety of combination like copper finned tube over a steel liner, Admiralty finned tube over cupro-nickel liner, Aluminum finned tube over an admiralty liner, etc. Available In Helical Fins192640CombinationsCopper finned tube over a steel linerAdmiralty finned tube over Cupro-Nickel linerAluminium finned tube over an Admiralty liner »Chemical Requirement No. of startsTriple startNo. of fins/ inch19 & 26Type of finLow & highPlacement of finsOD or ID or OD IDDia19.05mm & 15.77mmWall 16SWG, 17SWG, 17.5SWG & 18SWGLengthUp to 6 MTRS

TURBO CHILL is an integral low fin tube provided with spiral ridges on the inside. In a Turbo Chill Fin Tube, the inside fluid heat transfer capability is remarkably improved in comparison with the smooth in-tube type tubes. By the effects multiplied mutually by the tubes outside fins and inside spiral ridges a high coefficient for overall heat transfer is obtained. These parameters significantly contribute to the reduction in size of various freezing machines. Normally, Turbo Chill Tubes are generally supplied with 8 & 10 starts configuration; however, it can also be fabricated with other number of starts on request. These fin tubes are fabricated in alloy C 12200 to meet the chemical, mechanical and other test parameters of ASTM B 75 / B 359 and in alloy 70600 & 71500 to meet the chemical, mechanical and other test parameters of ASTM B 111 / B 359. BS EN, JIS and DIN standards are also available on request.     For tube parameters of 22.2 mm, 25.4 mm tube or any other special requirements please contact us. Turbo Chill fin tubes with fin density other than mentioned in the above chart can be produced on request. Turbo Chill Fin Tubes with alloy 71500 is also available; please contact us for Fin parameters. Turbo Chill Fin Tubes are generally supplied in the “as finned” condition. However, alloy 70600 & 71500 can be supplied in “annealed” temper upon specific request. Turbo Chill Fin Tubes are generally produced with desired plain ends, tubes can also be fabricated with intermediate landings upon specific request. Turbo Chill Fin Tubes are produced in straight length up to 8 Meters. Bigger lengths can be accommodated on request. Turbo Chill Fin Tubes are supplied with deburred / smooth ends.

We are an esteemed manufacturer, exporter and supplier of Supreme quality Copper Alloy Fin Tubes from Mumbai, Maharashtra. We offer Low finned Tubes and Enhanced Surface Finned Tubes with 19 & 26 fins per inch respectively. The products comprises of alloys of Alloys Copper, Copper, Nickel 95/5, 90/10, 70/30 Admiralty Brass Aluminum Brass. Available with Quality Control Chemical analysis as per specifications, these Copper Alloy Fin tubes are used in Heat Exchangers, Condensers & Chillers Condensers and General Heat Exchanging Units. As one of the reputed suppliers of this industry, we undertake bulk orders also.

Wire wound fin tube consists of a base tube with oval or near rectangular loops formed of wire which are wound helically over the tube with root soldering of foot of every loop to the tube. - The loop of wire creates greater turbulence thereby increasing the heat transfer coefficient. Root soldering along the entire length eliminates almost all air gaps between the fin and the tube. - For most applications, wire wound fin tubes make it possible to design a much compact heat exchanger coupled with lower pressure drop compared to conventional fin tube.

Low fin tubes are formed by passing the tube through a set of rollers which forms the fins from the parent material of the tube by making it flow in the desired way.

Amardeep steel centre is into supply & export of copper & copper alloys, aluminum, carbon steel, low alloy steel, high corrosion resistant alloy steel, ferritic & austentic stainless steel, nickel, titanium & other non-ferrous metal finned tubes. Amardeep steel centre is into supply & export of copper & copper alloys, aluminum, carbon steel, low alloy steel, high corrosion resistant alloy steel, ferritic & austentic stainless steel, nickel, titanium & other non-ferrous metal finned tubes.

integrally finned tubes by low finning / integral fin tube: type low fin:integral low fin tube for use in situations where extended surface is required, but lack of space or heat exchanger type dictates otherwise.available materials are stainless steel (304l, 316l, 321(h), 304h, 310, …), duplex, copper alloys, nickel alloys, hastelloy and titaniumintegral low fin tube has the advantage that it can improve the thermal performance of a heat exchanger without the necessity for changing shell size, flow arrangement or the repositioning of piping. finned heat exchanger bundle the external surface of the tube is increased by the formation of ''low fins'' by direct extrusion from the material of the base tube.size range / dimensions:- tube size: 12,7mm, 15,88mm, 19,05mm and 25,4mm- fins per inch: 16, 19, 26, 28, 30, 32, 36, 40 and 43 fins/inch dependant on material quality test capabilities :- non-destructive eddy current examination- air under water testing- hydrostatic testing (with fluorescent dye)- fin profile examination at 50x magnification            - dimensional & ring gage checks . .

We are offering finned tubes. Spiral wound finned tube fins are basically external surfaces on tube for increasing the surface area of the bare tube, resulting in a compact heat exchanger. The method of attaching the fins over tube is of prime importance, since even a slightest air gap between the tube and fins will defeat the whole purpose of fins over the tube. Considering the above facts heft has indigenously designed and developed a special purpose tube fining machine capable of producing following types of finned tubes. Heft was formed in 1994 to provide the service to petrochemicals, power generation, chemicals, pharmaceuticals industries with high quality helical wound finned heat exchangers tubing used in the maintenance and manufacture of the air cooled heat exchangers, air heaters & other related heat exchangers. Finned tubes are able to even out the heat transfer between the inside of the tube and the outside. When the heat transfer coefficient on the outside of the tube is significantly lower than the heat transfer coefficient on the inside of the tube, there is a major advantage to incorporate fins on the outside tube surface to take full advantage of the high heat transfer rate on the inside of the tube. By using a finned tube with eight times as much surface on the outside of the tube, the total length of the tube required for heating the viscous oil can be reduced by one sixth, fins are basically external surface on tube for increasing the surface area of the bare tube, resulting in a compact heat exchanger.

We are a prominent Manufacturers, Suppliers, and Exporters of Integral Finned Tubes. These Integral Finned Tubes come with superior dimension accurateness, sturdy construction, and fine finish. Integral Finned Tubes can improve the thermal performance of a heat exchanger without the changing shell size, flow arrangement or the repositioning of piping. We offer Integral Finned Tubes in different specifications to meet divergent demands of the clients.Integral Finned Tubes are suitable to be used in such applications where extended surface is required, but lack of space or heat exchanger type dictates otherwise. The external surface of the Integral Finned Tubes is enhanced by the formation of ''low fins'' by direct extrusion from the material of the base tube. Highlights : Smooth finish Accurate dimensions Sturdy construction Corrosion resistance surface Availability : Available materials are stainless steel (304L, 316L, 321(H), 304H, 310 etc.), duplex, copper alloys, nickel alloys, hastelloy and titanium Size range / Dimensions : Tube size : 12,7mm, 15,88mm, 19,05mm and 25,4mm Fins per inch : 16, 19, 26, 28, 30, 32, 36, 40 and 43 fins/inch dependant on material Qualities : Non-destructive eddy current examinationAir under water testingHydrostatic testing (with fluorescent dye)Fin profile examination at 50x magnificationDimensional & ring gage checks In specifying finned tubes you should advise : Number of finned tubes requiredOutside diameter of tubeTube thickness or thickness required under root of finLength of finned tubeNumber of fins per inchUnfinned endsSkipped portions and dimensions from one endMaterial of tube In specifying U-tubes you should advise : Tube diameter, thickness and materialStraight leg lengthCentre line radius (or diameter) and number off per rowWhether post bend heat treatment is requiredWhether hydraulic testing is required

We have our fining capacity for manufacture of “L” and “G” fined tubes of upto 40 ft long. Aluminium fins are mechanically bonded to tubes provides more surface area for heat transfer. Aluminium has low cost, less weight & good thermal conductivity compared to other metals hence now a days these tubes are taking place of conventional copper finned tubes. For more details contact us:- Enginemates Heat Transfer Pvt Ltd. Contact:- 91 22 25919293/94/95

We are actively engaged in manufacturing, wholesaling, trading and supplying an excellent range of Copper Finned Tubes. Our given copper tube is manufactured from the high quality material and state-of-the-art technology in adherence to set norms of industry. This copper tube has an integral fin (rather than an applied fin) from the wall of the tube it is rolled up. We offer this copper tube in various specifications in order to meet the requirements of customers. Features: Sturdy design High temperature resistance Dimensional accuracy

We exports Extruded Fin Tubes which are manufactured by cold rotary extrusion process. The Extruded Fin is formed from an outer aluminium tube with a large wall thickness, which is aligned over an inner base tube. The two tubes are pushed through three arbors with rotating discs that literally squeeze or extrude the aluminium fins up and out of the muff material in a spiral shape in one operation. The process of extrusion hardens the fins and prevents dissimilar metal contacts at the fin root. The exposed external surface is aluminium and there are no minute gaps between adjacent fins where moisture can penetrate. This ensures good efficiency that is expected when using an extended surface for heat transfer. During the finning process a tight mechanical bond is made between the finned aluminium outer tube and inner base tube of the required metal.

unraj Industries Exports wire wound Fin Tubes or Turbulators made of loops of wire wound helically on a central rod or tube and soldered to the inner surface of the tube. The internal turbulators are made of stainless steels, copper and galvanized steel wire. Sunraj make wire wound turbulators for tubes of inner diameter as low as 8 mm. There being no limit on higher diameters and lengths.Wire wound turbulators are excellent tube heat transfer enhancement devices that increase the tube side heat transfer coefficient several fold at not too high pressure losses. Wire wound fin tubes for use in air cooled oil coolers are provided with internal fins selected from wide variations in configuration. We also manufacture double pipe wire wound fin tubes for use in refrigerated air dryers and heat exchangers for viscous and small streams. Wire wound fin tubes can withstand temperature up to 180ºC with standard solder wire. However for high temperature application it can withstand temperature up to 290ºC. This is with the use of special silver content solder wire.Wire wounded tubes can be manufactured by using various base tube material such as Carbon Steel, Copper, Cupro—Nickel, Brass and Alu. / Adm. Brass, Stainless Steel with fins of Copper, SS 304, SS 316, C.S & G.I

Copper finned tubes Instead of smooth tubes. The corrugation generates high turbulence in Media, Vastly enhancing Heat Transfer co-efficient for a given Reynolds number. Copper & Cupro Nickel Fin tubes offers more surface area compared to plain tubes& increases heat exchange capacity of the tubes. Fin tubes are manufactured as per the customer’s specific requirements. We have the skill & necessary know-how for the production of integrated fin tubes & can manufacture the same as per your requirements.

Wire Wound Fin Tubes, Engineering Goods, Industrial Products, Textile

Multimet Overseas is involved in Manufacturing, Exporting & Supplying an extensive range of high quality Copper Finned Tubes for a wide range of various industries.We have the capability and flexibility to meet unique product requirements and exact specifications and size.Multimet Overseas services are in demand with the traditional industries as well as with the customers who indulge in modern mega trends.Our Copper Finned Tubes are tested at several parameters, our products are known for their excellent conduction towards heat andelectricity.We have a team of highly qualified, motivated & experienced staff in production and sales to meet customers ever growing quality and service expectation.It holds strongly to excellent customer service, products-quality, commitment, compliance and competitive price structure.The Copper Finned Tubes which we offer to the clients are available at very reasonable market rates and they are high on demand due to the high tensile strength and the durability which they offer to the clients.The products are manufactured as per the international standards prescribed.These copper Tubes are made using the best technology available in the market and the latest machinery to ensure that they have a precise make and they are high on dimensional accuracy. These products are highly used for the purpose of construction and have a very long service life.

Fin Tube, Spiral Fin Tube, Auger Filler, Form Fill Seal Machin

We are offering finned tube.tubes for boiler and economiser, with ms/ss fins attached, ibr approved.

Finned Tubes, Stainless Steel Wires, Butweld Pipe Fitting

Copper Finned Tubes, Copper Anodes, Copper Nuggets, Copper Ball