Fire Hydrant System Spares Dealers in Mumbai

We are determined to provide superior quality hose reel system to our valued clients. The offered system traded by the use of premium quality raw material that is procured from the authentic vendor of the market. This system is in compliance with industry norms and offers a reasonably accessible and controlled supply of water to combat a potential fire risk. Apart from this, our offered system undergoes several tests on reel defined parameters to ensure defect free range is delivered at clients’ end.

A fire hydrant is an active fire protection measure, and a source of water provided in most urban, suburban and rural areas with municipal water service to enable firefighters to tap into the municipal water supply to assist in extinguishing a fire.The water would fill the hole, creating a temporary well, and be transported from the well to the fire by bucket brigades or, later, by hand-pumped fire engines. The holes were then plugged with stoppers, normally redwood, which over time came to be known as fire plugs.

   ED Seal : Buna-N is standard•   Viton® are available on request•   For Viton: Suffix code 'V' alongwith the part number of the fittings    Example : EVGEM-6L-10MED/ELV•   The above part numbers are for complete fittings including Nut, Bite Ring and Body.•   Only body without Nut and Bite Ring are available on request.•   If you have requirements other than above size and Dimensions,    please contact us with complete details•   Dimensions are for reference only and are subject to change without notice.

We are offering fire fighting pump. Product range: •jockey pumps & booster pumps of various capacities head •higher capacity & higher pressure pumps as required. •engine coupled pump sets with control panel.

Fire Hydrant System consists essentially of a network of pipelines (both underground and over ground), which feeds pressurized water to several hydrant valves.  These hydrant valves are located throughout the area to be protected at intervals determined by Hazard Classification and Fire Rules (TAC/NFPA/LPC, etc). In case of emergency the hoses are coupled to the respective hydrant valves through instantaneous couplings and jet of water is directed on the fire to extinguish it. 

Technical Specfications :- Size: 63mm Material: Gun Metal/Stainless Steel/ Aluminum Alloy Conforming Specification: IS: 903, CM/L No: 8929306 Performance Test: Hydrostatic Test (Body Test): Tested at 21 kgf/cm2 Other Range: 38 mm, 52 mm & 70 mm Hologram: Sticker stuck on Coupling.

We are offering short branch pipe (isi marked). Its inlet connection is 2 ½” male instantaneous and outlet is solid jet nozle. Material of construction may be gun metal, aluminum alloy or stainless steel. Its operating pressure is 150 psi max and is naturally polished. It is a basic fire fighting nozzle commonly used by most fire brigades. These smooth bore tips creates concentrated jet pattern of water flow with maximum reach. Material gun metal - gm stainless steel - ss aluminum - al size 63 mm male instantaneous test pressure 21 bar working pressure 7 bar discharge pattern solid uniform jet pattern approval isi approved , is: 903

Cease Fire XT Supply & Wholesale of Hose reel Drum & Hose Reels for Water, Fire Safety, Welding, Air, Gardening, High Pressure applications, etc.

We are a prominent name in the domain of making available a qualitative range of Hose Reel Drum. The Hose Reel Drum that we provide is sturdy in construction and guarantees a long life. Our Hose Reel Drum catering to the needs of various industries, and thus widely demanded in the market. Besides, we are a chief Supplier of Hose Reel Drum. Why Our Hose Reel Drum? Made using quality materialFlawless constructionDurableReasonably priced

Different types of Firefighting branches and nozzles for various applications are manufactured by us. These are manufactured to strict quality standards and tested to ensure reliable performance. Provided with 63 mm Male Instantaneous Inlet, different Inlets and sizes can be provided on request. The Short branch is still commonly used in most Fire Brigades as the basic Firefighting nozzle. This can be fitted with a choice of nozzles suitable to flow and operational requirement. Our Short branch is manufactured to Indian Standard IS: 903 and marked thus. Made from G.M. or SS304, Aluminium versions (non-ISI) also available. Item Description : 63mm Branch Pipe with Nozzle as per IS:903, ISI Marked Material of construction : G.M./ SS304/ Aluminium

Features:   I. Construction in GunmetalII. Jet spray & shut off TypeIII. Chrome Plated Finish  

We are offering durable and highly efficient Fire Hose Nozzles manufactured by using high-grade materials. These Fire Hose Nozzles are specifically designed for providing effective results with minimum efforts employed. Our range of Fire Hose Nozzles features highly advanced designs and is ideal for all fire-fighting operations. With our Fire Hose Nozzles, the fire fighters will experience an enhanced performance level in the fire-fighting situations. These nozzles minimize the unnecessary damage of water while providing safety to the fire crew. Highlights : Highly durable Technologically advanced Offer enhanced performance Minimize unnecessary water damage