Instrumentation Equipment Dealers in Borivali, Mumbai

A Water Softening Plant is used for the purpose of softening the hard water by removing calcium, magnesium and other metal cations. Water Softening is a simple process of ion-exchange and in this process calcium & magnesium ions are exchanged by sodium ions. Our Water Softening Plant is widely acknowledged by the clients owing to its excellent performance, sturdy construction, low maintenance and easy operation. Water Softening Plant that we offer is extensively demanded in hospitals, schools, commercial or residential buildings, etc., in order to minimize the probability of scaling installation. Special Note : To control level of TSS–TOTAL SUSPENDED SOLIDS (undiluted impurities & sand particles entering in Tower Basin) in cooling tower water installation of online sand filter is must. It will enhance efficiency of softener resin by protecting it from getting covered by sand.

Lambda Control System, CNG Kit Reducer, Timing Advance Processo

PVC Shroud, PVC Plastisols, PVC Rexin

  Designed to be wall or panel mounted. Display with red LED (30,5mm high) and 11 icons. Dual display with red LED (25,3mm high) and yellow LED (20,3mm high) and 13 icons. Advanced multifunction refrigeration controllers with dual temperature management. Designed for a dual refrigeration circuit or 2 independent circuits. Clear alarm signals thanks to the front lid Advanced multifunction controllers with temperature and humidity management. Dehumidifying action by cooling circuit. Standard communication protocol ModBUS-RTU. Hot key or Prog tool kit connector for a quick and easy programming.

Compact Remote Terminal Unit, Fault Passage Indicator

Electronic control unit in conjunction with level switches can be used for pump control, opening and closing of electrically operated valves, heaters and or high and low level indication. The electronic unit Model LC1 FL reduces the voltage and converts it to 5 VDC for operation of reedswitches enhancing their life, above all ensuring operational safety. The LED's in the front panel indicates Main Power Supply On, Pump Start and Stop conditions. The start/stop push buttons in the front panel enables testing of the control unit and also manual start and stop. The control unit has a Change over potential free relay output contact-hold on type. Contact change over takes place between High and Low level only. Relay contacts are rated 5 Amps at 230 VAC. Control action can be reversed at site by changing connections from NC to NO. For certain applications where high and low level indications are required, 2 separate relay output contacts are provided in the control unit-with LED indications for High, Low and Mains on Model LC2FL are used in boilers where High and Low Level Contacts are used for Pump start & stop while Very Low Level Contact is used for heater cut off.

Renowned for our outstanding patron care support, we have become a distinguished supplier of Power Control Center Panel in the market. We can carry out excellent supply chain management, as we have an ultramodern warehouse and the latest inventory control systems. Both help us meet bulk requirements and save us from stock out situations.

Zenium 1100 Volts control cables are manufactured using high grade XLPE/PVC insulation, with electrolytic grade solid/stranded/flexible plain annealed and tinned copper conductor laid together, extruded using protected PVC inner sheath, special zinc coated galvanized iron wire/strip armour providing protection against external environmental hazards. This assembly is overall sheathed with high grade PVC with FRLS, ZHFR and LSHF compounds that are designed and tested. Theses cables meet national and international standards like IS:1554 part-1:1988, IS:7098 part-1:1988 and IEC 60502. These cables are suitable to use indoor/outdoor for control and power transmission.

Variable Frequency Drive is a DSP based general purpose AC Drive with state-of-the-art. Technology and incorporates the latest semiconductor power devices, with following salient features : Indigenously designed AC drives to with-stand Indian Power Conditions for Motor ControlSpace Vector Modulation TechniqueDC Bus Ripple cancellationLow output THD (total harmonic distortion)Output short circuit protection & various fault monitoring Custom designed human interface (HMI) Specifications: Ratings Available 0.37 kW to 600 kW 3 Phase, 380V/415V/480V, 50/60Hz, Input Rating Power Supply,Tolerance Voltage : +10%, -15%,Frequency +/-5%, Imbalance less than 3%Output Voltage 3 Phase, 380V to 480V (Proportional to input voltage)Output Frequency Range 1Hz to 400HzFrequency Stability Digital setting : +/-0.01% of max. FrequencyAnalog setting : +/-0.2% of max. Frequency (at temperatures -10oC to +50oC ambient)Output Rating Overload Capacity 150% for one minuteControl system Space vector modulation with bus ripple compensationAdjustable current limit Programmable 30 to 200% of drive rated currentStarting frequency 1 to 6Hz adjustableBase Frequency 30 to 400HzCarrier frequency 2kHz to 6kHz programmable in steps of 1kHzJog function Available with programmable speed/Acc/DecCatch on fly Drive will search the running Motor speed, catches it and then proceeds to the set speed.Jump frequency One jump frequency control with adjustable jump range DC injection Braking

Features Rugged CRCA sheet with powder coated finish. Modular Construction. Operates on 230 VAC, 24 VDC. Standby Battery backup with build-in charging. Fire Fault status in unambiguous colored LED. System On, Main, Standby ON status indication. Low Battery visual warning with audible buzzer tone. Earth fault indication with audible buzzer tone. Relay Outputs for actuators. Lamp test facility. One man walk test facility. Zone Isolation facility with loop voltage cut off. Compatible to all types of conventional detectors.

Libratherm offers Miniature Head Mount Two wire Temperature Transmitter Model LTX-3000, which accepts RTD (Pt-100) or thermocouple as the input and provides output of (4-20) mA proportional to mV or resistance input. These transmitters are extensively used to minimize the effect of electrical noise and to eliminate the need of long runs of special compensating and three wire cables since ordinary pair of copper wires can easily be used without the drop or loss of input signal. Also, the current signal is less susceptible to industrial RFI/EMI noise compared to the voltage signal. These transmitters are linearized to the millivolt signal produced by a thermocouple or RTD sensors and not to the actual temperature.LTX-3000 require no separate power supply as it is powered by current drawn from the current loop itself and is thus intrinsically safe when used with appropriate barriers. It is very compact, economically priced and can be directly mounted inside standard heads of the thermocouple or RTD sensors. It can also be easily fitted inside the flame proof / weatherproof head or junction box. It is available for different thermocouples, RTD (Pt-100) duly calibrated for required temperature range with ZERO and SPAN adjustments for on site calibration. LTX-3000 is available in the standard size of 44 mm. OD and 26 mm. height (with the terminals). The Transmitter is also available in DIN Rail compatible modules.ApplicationCarry thermocouple or RTD signals over long distance using ordinary copper wires – without noise and loss of accuracy. Eliminates use of costly compensating cable.Can be directly interfaced with PLC, DCS, SCADA, PID, Program controllers etcâ€Â¦Transmitters are available with Thermocuple and Pt-100 sensors with Aluminium die cast head or Flame Proof Head.

Lambda Control System, CNG Cylinder, Filling Valves, CNG Regulato

We are offering temperature probe like zeal, bird meditech, meditrin, phoenix & ge lullaby are available. Also skin type, rectal type available for adult & paediatric.

Solar Electric Panels, Solar Products, Micro Wind Turbine

We have been a leading manufacturer of major automotive and non-automotive components since the early 2000s. In pursuit of global scale and ranking, we entered into an alliance in 2013 with Spain’s CIE Automotive, to create one of the world’s leading components company. We make a wide variety of components, making us India’s leading producer of forgings, castings, stampings, gears, and magnetic products for automotive and non-automotive applications.

Features : Suitable for Single phase AC Induction motor. Reduces starting current and Torque. User settable jump start and soft start / ramp time. Accepts start and stop command from inbuilt push button switches. Easy to install and maintain. Applications: Machine tools AC Compressors Water Pumps High inrush fan motors Air compressors Crop dryers, augers, bucket elevators, and fan or pump applications

Libratherm offers Microcontroller based multiple Ramp Soak programmable PID temperature controller Model PRC-489 which is designed to improve reliability, accuracy and control for all temperature control applications. It features Ramp and Soak functions (the capability to control the temperature and its rate of change over a predetermined time span). Single pattern of total 16 (rampsoak) steps can be programmed and stored in the memory. It can also be used as single set point control when the rampsoak profile control is not desired. Inputs can be Thermocouple, IR Thermocouple, RTD Temperature Sensors, Voltage, Current Signals etc. PRC-489 offers both switching outputs in the form of SSR driverTriac (AC SSR) for external SSR or external load contactor and analog output in the form of (4-20) mA or (0-5) volt control signal, which can be used to control heater power through Thyristor power regulator (for electrical heating system) or to control the position of a modulating motor valve (for oil or gas fired heating systems). The analog outputs can be directly connected to Libratherm make single phase three phase SCR phase angle or zero cross over fired power controller which is ideally suitable for both resistive and inductive heating loads.