Instrumentation Equipment Dealers in Chembur, Mumbai

TEMP TECH manufacturers Resistance Temperature Detectors (RTD’s) confirming to all international Standards like IEC 751 , GOST, BS-1904, DIN 43760, JIS C1604, 1606 etc…. All types of configurations are available and most of the RTD’s are custom made. Accuracy in measurement of Temperature, faster response, sturdiness, ease in maintenance and replacement are the main criteria of design

The Telecom Division is well equipped with the most latest and modern manufacturing plant for Optical Fiber Cables. Apar's Uniflex Cables Division has been manufacturing Fiber Optic Cables since 1995. We manufacture Unitube cables up to 24Fiber, Loose Tube cables upto 432 Fiber and Ribbon Cables up to 576 Fibers. Cables are offered in various design constructions as per customer requirements variants like DUCT, ARMOURED, ADSS, Fig. 8 etc. Also offered are cables for FTTH constructions. The cables with Single mode Fiber G652B, G652D, G655, G657 and in Multi-mode OM1 (62.5125), OM2 (50125), OM3 (50125), OM4 (50125). We possess the Type Approval from TEC for G652D fiber and are a regular vendor for several telecom operators viz. BSNL, BBNL, Reliance Infocom, Reliance Jio etc in India besides several MSO’s (Multi Service operators). Cables have been exported to several countries.

Keeping in mind shipping and handling factors, we ensure our products are packed using industrial grade materials. Furthermore, we provide customized packaging solutions. Our team members help us completely to deliver exceptional range of products that is in conformance with the standards.

Software for the system is made very easy with powerful graphical overlay features, seamless reporting to spread-sheet, Snap-shot / frame save features, etc. Bench-top Vision Inspection system with Motorised Joystick operated X, Y, Z Measuring Axis Zoom magnification : 11X to 67X basic, Two Axis workstage : 370mm x 275mm Measuring Travels : 200mm x 150 mm with 0.5um resolution Z-Axis Travel : 150mm with 0.5um resolution Solidstate zone lighting control through software Ultrafine reference cross-hair & On-screen DRO Non-contact Tape encoders with 0.5µm resolution on all 3 Axes

Stranded circular compacted copper or aluminium conductors, XLPE insulated, copper tape screened, three cores assembled together with non-hygroscopic polypropylene fillers, covered with extruded bedding, armoured or unarmoured and PVC sheathed Cables comply with IEC 60502.

Vel Engineering Services designers use their vision and expertise to design, build and install entire Pollution control Systems for the Chemical process, woodworking, grain handling, leather, glass, rubber, textiles, paper and plastics industries. The Pollution Control System components includes Bag Filters, Cyclone Separator, Air Scrubber, Electrostatic Precipitators, Dust Collectors, Mist Eliminators, Fume Eliminators, Odor Control Units, Air Handling Units and Control And Monitoring Panels. Each of our Pollution Control system is custom-designed to handle the specific airflow and product collection needs of the customer, devising transfer methods for waste collection, separation or immediate recycling uses. Advanced computer technology is used throughout the design and production processes, beginning with Cad-generated engineering designs.

We at, Silver line Metal Engineering Private Limited are the well-known pioneers in manufacturing and exporting a wide range of Festoon Systems. These range of products manufactured using high grade raw materials. We manufacture these products known for its sturdy-built and consistent. The price of our products is very cost-effective. All the products are listed under the major categories as follows are Track for Trolley 4500 mm, C-Channel for Support 500 mm, Track Coupler, Track Clamp, Towing Trolley, Towing Arm, Wire Clip Plastic, End Stop, Flat Cable Trolley, Round Cable Trolley, Pendant Trolley, C - Channel Clit and Fixed Trolley.

Combustion Control Systems, Electrical Equipment, Heating Element

We are offering instrumentation cables. The fundamental requirements of any instrumentation cable are performance, capability and long term reliability. Our screened armoured instrumentation cables ensure higher performance even in tough working conditions because of the fact that strict quality control checks are carried out by our experts at every stage of the manufacturing process.

Production flexibility Easy coating scale-up Interchangeable drums Fully perforated drum Aqueous and solvent designs Anti-bearding spray nozzles Automated control system User friendly operator panel Coating pan lifter available Coating pan rack available

TYPE AC & DC Distribution Boards MCC & PCC LDB & PDB DG Protection, Synchronising Panels, AMF Panel Metering Panel Custom built Distribution, Instrumentation & Protection Panels FEATURES Single front, Double front, Fixed type, Semi draw-out type, Fully draw-out type, Fully isolated Vertical & Horizontal busbar chamber Fully isolated cable chamber Manufactured out of CRCA sheets Floor mounting, free standing, Vermin & dust proof Powder coated with 7 tank pretreatment Degree of protection upto IP55,Short circuit withstand strength up-to 50KA PLC based AUTOMATION Panels with MMI Mass-Tech offers PLC based total solution to your Automation needs.The scope covers system engineering, selection of optimum hardware, programming, designing MMI screens and plant specific database, reports generation. In-house trial & site commissioning is also supported. Mass-Tech also offers PLC based systems for DG control and synchronisation, Conveyor systems such as Ash handling system, Building automation including control of AHU, lighting, water treatment units, parking etc. RATING 440V AC, 220V DC upto 5000A, Customize as per requirement

  Leadshine DCS series drives are fully digital brushed servo drives developed with high performance DSP and advanced algorithms for smooth motion control. All inputs of those servo drives are opto-isolated. Taking step and direction control inputs makes Leadshine brushed servo drives easy to implement in many OEM applicaitions.  They can drive 5W to 400W brush DC servo motors at very high precision smoothly and quietly with very low motor heating at very effective costs.

For continuous level measurement of liquids (even if polluted), mash and paste materials in open or closed vessels, sumps, open channels, etc. Configuration and adjustment of measuring range by two buttons Xi version for usage in explosive areas State indication by two LEDs Current (4 … 20 mA) or voltage (0 … 10 V) output Options of inverse function (20 … 4 mA or 10 … 0 V)   Ultrasonic level meters ULM® is self contained device that includes electroacoustics transducer and electronic module. The level meter ULM transmits series of ultrasonic pulses which propagates towards the liquid surface. Reflected acoustic wave is received back in the ULM transducer and processed in electronic module. The distance calculations are based on time of flight of the acoustic wave to the level and back.   Features   ULM  –53_ –02–_ Measuring range from 0.25 m to 2 m, plastic PVDF transmitter and plastic body (PP+HDPE), process connection with thread G 1″. ULM –53_–06–_ Measuring range from 0.25 m to 6 m, plastic PVDF transmitter and plastic body (PP+HDPE), process connection with thread G 1 ½”. ULM –53_–10–_ Measuring range from 0.5 m to 10 m,plastic PVDF transmitter and plastic body (PP+HDPE), aluminium alloy (“Xi” version) or HDPE (“N” version) flange. ULM–53_–20–_ Measuring range from 0.5 m to 20 m, with plastic PVDF transmitter and plastic body (PP+HDPE), aluminium alloy flange.

Air compressors ManAuto - Startstop, MasterleadLag selectable Control system , with all interlocks and safeties incorporated .System capable of managing upto 3 compressors. Comprises of one Master panel and two slave panels.Optional - embedded control system with localremote HMI and communications with external systems available.Designed to meet all Class requirements

An easy and economical solution for switchgears, panels, switchboards, and transformers. Features: Material : Electrolytic Copper Finish : Natural / Tin Electroplated Length : Upto 2 meters Thickness : 1mm to 10mm Width : 10mm upto 200mm Variants : Solid Busbars, Punched Busbars, Threaded Busbars

We lay special emphasis on the packaging so as to ensure damage-free deliveries. For this, we make use of high quality material for wrapping our products. We are associated with renowned transportation providers to ensure delivery of consignments is carried out without a glitch and in a timely manner.

High quality standards in production and storage necessitate a comprehensive monitoring system that delivers measured data reliably. The adaptive RMS Rotronic Monitoring System is the perfect solution for a wide range of applications.