Komal Chemiequip Pvt. Ltd. Nityanand Nagar, Mumbai, Maharashtra

Excellent for DI spray rinse, precision cleaning and other applications. Electric inline water heaters with all titanium wetted parts.Sizes up to 144 kW.

Water Demineralisation is a process of removing mineral salt from the water. Only those substances which ionise in water can be removed by this process before it can be used for any Industrial Applications.It contains two resin columns. CATION EXCHANGER COLUMN : Strong Acidic Resins to replace the metallic cations with hydrogen ions. When no more hydrogen ions is available for exchange, it must be regenerated with HCl.ANION EXCHANGER COLUMN : Strong Basic Resins to remove anions of both strong and weak acids and producing water which is sensibly free from dissolved solids. Regenerated by passing Caustic soda.RAW WATER QUALITY : The raw water should preferably be municipal tap water at ambient temperature, free from colour suspended matter, turbidity, free chlorine, heavy metals, oil, etc. Boring, Well, River bed and turbid water will demand analysis and vigorous pre-filtration before passing through the "DM. Plant”TWO-BED SYSTEMS (K SERIES) : Our two-bed demineralisers are used where water containing as little as 5ppm of dissolved solids or conductivity less than 25 µs/cm is required. Choose from a range of models to suit exact needs available in PVC, FRP, LDPE & MS Rubber lined columns, charged with resins, multi-valve controls, conductivity cell.    

Number Of Flower : Demineraliser

Material : PVC, FRP, LDPE & MS Rubber Lined Columns

Application : Removing Mineral Salt From Water For Industrial Applications

Feature : Two Resin Columns, Cation Exchanger Column, Anion Exchanger Column, Raw Water Quality Considerations, Two-bed Systems (K Series)

Rod Insulators or Insulating block made from chemically inert material to give perfect insulation between bus-bar and tank. Available in size 1/2",3/4",1" and higher.

Aqueous Industrial Ultrasonic Cleaning machines are manufactured indigenously to high International specifications. Available in various standard capaciters and also non-standard models for specific requirement. Ultrasonic Power at high frequency-normally 30Khz (also available in range 23 Khz to 40Khz) is fed to piezo electric transducers (PZT). The electrical power is converted to mechanical vibrations by these PZT. The transducers are bonded to the bottom (or on sides in some applications) of the SS tank containing cleaning solutions. The mechanical vibrations are transferred to the liquid through the tank surface, creating microscopic bubbles - known as cavities in the liquid, which implode with high pressure forming brushing effect on the surface of the components to be cleaned. As a result the contamination is removed. These cavities being microscopic can reach inaccessible crevices, holes in the components where manual cleaning with brush is impossible. The cleaning agent normally dissolves the contamination leaving only the sediment that is not dissolved. Single stage ultrasonic cleaning system is useful with Neutral, Alkaline liquid or mildly Acidic solution.

Brand Name : Electrosonic

Rod Heaters are having replaceable element and Tubular Heaters (Straight 'U' 'L' & Hair Pin Shapes) are having non-replaceable elements. Vertical Mounting, meant for all Electroplating and Metal Finishing Processes. For horizontal mounting these heaters are supplied with threaded flanges. Available from 0.5 to 5.0 KW capacities in single or 3 phase operation. TITANIUM STAINLESS STEEL 304, 316 & 316L MILD STEEL l LEAD BONDED M.S SILICA (MILKY WHITE) GLASS (TRANSPARENT) TEFLON TUBED S.S. (only Tubular) Also Protection Guard for Glass & Silica Heaters

Plating Jigs or Racks are useful where the output is large and even for distribution of electric current. Other advantage uses are · a good deal of saving in labour, time and ensures speedy loading · increasing productivity · reducing production costs. Jig Spines are made from Copper, Brass, SS or Titanium and contact tips are from tempered Stainless Steel, Phosphor Bronze or Titanium Wires.

Sophisticated digital to simple non-indicating controls. Combination controls up to 150 amp capacity. 

Heavy duty, custom built Barrels are in M.S., S.S., Monel and Inconel suitable for Hot Processes like Phosphating, Electro polishing, Blackening, etc. in round, hexagonal or square shapes, perforated, fixed or variable speed motor or low voltage motor with transformer either overhead or side drive, hanger arms with or without automatic pick ups.

This ideally designed and custom fabricated PP Barrel is meant for Mini rod, Spokes, Umbrella ribs and other special applications, adjustable to size, speed regulated by DC motor and transformer,

Unique or difficult applications are our specialty. Configurations available include: lab heaters, flexible riser heaters, phosphate heaters, deep tank heaters, Varipower TM heaters, EASYPLUGTM heaters, etc.

These are today well known for their high quality, workmanship, operating efficiency and long life performance comprising of a double wound transformer to reduce the input voltage to suitable value required for the Rectifier Stack, Interphase Transformer (in 3 ph. units) Silicon Diodes, Hand operated ormotorised stepless on-load control (variac/dimmerstat) or Automatic control where the output voltage, output amperage or current density is constant. Control Panel with D.C. volt / amp. meters and MCB protection, lamps, wheels and choice of paint shade. These rectifiers are in Natural Air cooled and Forced-Air cooled or Natural oil cooling through radiator depending on the ratings, prevailing atmospheric condition and process. The AC input is either 1/220/50 having DC output around 15% ripple or 3/415/50Hz or nearer having ripple almost around 5%. Ripple free Rectifiers are also available. Standard Range Voltage : 8, 12, 16, 20 and 24 generally for plating Amperage : 50, 100, 150, 250, 500, 750, 1000, 1500, 2000, 3000, 4000, 5000 and above.   DOSING PUMP CONTROL RECTIFIERS: Any metering pump can be monitored through the Rectifier for Load Current, Repeatability, Addition of chemicals (Time & Quantity), operation in manual or auto mode.

Wide variety of heater types and features to fit virtually any application. Stainless, titanium, fluoropolymer and other materials. Sizes from ½” screw plug to 14” flanged.

This Tin/Solder Coating Machine is used for coating the Tin or Solder (or other metal) on Printed Circuit Board. This improves the solderability and protects the PCBs. The clean drilled PCBupto 310mm width (also available 450 and 600mm) is passed between the coating rollers, rotating at 0.25 r.p.m. The bottom roller transfers tin or solder alloy for the PCB, and the top roller applies uniform pressure for uniform coating. The metal bath is of 7 kgs. capacity, duly insulated and fitted with an electronic temperature controller, 2x0.75 KW heater, 12V DC high torque, variable speed motor, with AC lower drive housing AC input 230V, 50cycles. The unit is housed in stainless steel body or coated with special epoxy coating to ensure durability. Also fitted with Mains, on-off switch, Heaters on - off, Controls & Indicators are housed in a separate or built-in control console.

Ideal for most acidic chemistries. Metal grounded quartz sheathed heaters up to 30 kW. Polypropylene guards standard.

This solid state device to impart unique advantages like uniform plating thickness   Finer grain structure Excellent adhesion, ductibility & hardness Lower deposit stress Reduces hydrogen embrittlement Defects in HCD & LCD elimination Cost savings Colour variation   Pulse Rectifiers are having all the features of CCCV units including Automatic ampere sec/min/hr. meter, Filtered DC output less than 0.1% ripple, Pulse & Pause time adjustable between 0.01 to 999 milli-sec, Output current pulse controllable by thumbwheel switches and Peak voltage / current display Digital meters.   OPTIONALS: Computerised Process Module   Pulse with Reversing Polarity (PR) or Periodic Reversing Polarity (PRP) or Periodic and continuous Reversing Polarity (PRPR) Metal consumption mode Pulse attachment for conventional CVCC Rectifier High Power Pulse Rectifiers for Hard Anodising and Hard Chrome Plating can be catered as per requirement

The state of art, solid state, thyristorised, high precision, ripple free, constant current and constant voltage, air cooled, compact Rectifier units are single phase input, high quality, maintenance free, with CVCC modes, coarse and finer Potentiometer controls for both voltage and amperage, ripple less than 1% on full load, digital meters with overload protection and short circuit proof, easy operation.  

Bag, Carbon or Cartridge individually or in combination) : This is an on-line filtering device with or w/o pump set for flow upto 5000 lit/hr.upto 10 micron with replaceable filter bags, activated carbon or filtering cartridge. Must for contaminated plating solution or water containing excessive dissolved solids, thereby enhancing efficiency of filter / DM water plant.

This fully immersed polypropylene / perspex barrel is suitable for 0.5 to 2 Kg. plating range. The barrel is powered by geared motor, 12 volts D.C. (with power drive) or A.C. geared motor. The tank of PP/PVC / Perspex fitted with Bus-Bars & Danglers. Optional : Heater, Air Agitation, Cathode Movement, Filter, Rectifier etc.    Medium BARRELS:  Medium portable barrels are in hexagonal design for two sizes viz: 3 to 5 kgs and 7 to 10 kgs. Octagonal Barrels are in bigger sizes from 15 kgs. onwards made of Acrylic, PP or CPVC, for most applications. Powered by low voltage DC geared motor (supplied with Power Drive) or AC motor single or three phase, geared or gearbox driven through V-belt, operated single (having two or four cathode contacts) or two operators or by hoist/transport mechanism. Mechanical disengaging arrangement for loading and unloading. STANDARD SIZES:  11” x 7”, 12” x 8”, 18” x 10”, 24” x 10”A/F or bigger sizes. Suitably lined-tank from 2’ x 1.5’ x 1.5’ onwards can also be made for these Barrels with Standard filltings.

This is one piece economical model, on Coulometric principles, on destructive bases for measuring thickness of plating like Brass, Cadmium, Chromium, Copper, Gold, Lead, Nickel, Silver, Tin, Zinc & Alloy plating on ferrous , Non Ferrous and Non Metals bases. This Digital unit can be used for determination of thickness of almost all Combinations of Standard Plating or Metallic Coating on Magnetic base like Mild Steel, Nickle, Cobalt, S.S. etc. Non Magnetic Base like Aluminium, Brass, Cadmium, Chromium, Copper, Silver, Tin etc.

Plating Jigs or Racks are useful where the output is large and even for distribution of electric current. Other advantage uses are · a good deal of saving in labour, time and ensures speedy loading · increasing productivity · reducing production costs. Jig Spines are made from Copper, Brass, SS or Titanium and contact tips are from tempered Stainless Steel, Phosphor Bronze or Titanium Wires. igs are to be used for Electroplating, Electro polishing, Painting and Anodizing. For surface treatment such as Phosphating, Electro painting and Enameling, jigs can be used and these are termed as furnace furniture. Jigs made of Titanium are to be used for anodizing / electro polishing. Jigs can be designed, fabricated and insulated according to customers requirements. The following details are required while enquiry/order : (a) Cathode rod diameter or cross section. (b) Vat depth, solution depth, nature of solution and temperature.(c) Spine style, contact style and configuration.(d) Distance between Cathode rod and Anode bus bars and Rectifier Capacity.(e) Nature of articles (if possible samples should be sent).

This set in a briefcase or wall mounted cup board provides all the Apparatus and re-agents necessary for carrying out regular tests, to estimate the contents like metal, the free cyanide, chloride, boric acid or causticity etc. in various solution. Reagents, and methods of analysis are supplied with the sets. (While ordering, please specify the type of plating solution desired to be analysed and which are the items to be determined from such solution so as supply the kit accordingly).

Solid-liquid seperation dewatering hazardous wastes, sludges, reclamation of solids and recovery of chemicals solution. Recessed, gasketed PP plates with manual or air operated Hydraulic enclosure having models upto 50 cu. ft., plate sizes 355 x 355 mm to 1200 x 1200 mm. Used by Chemical Mfrs. and in Effluent Treatment Plant.  

n range 3, 5 & 7.5 H.P. in 3 phase 3000 RPM mounted on Heavy duty C-I stand, complete with push button starter & wheel guard.:

This is an attachment to the overflow collection tank in cleaning system, in which oil contaminated cleaning solution is coming in contact with a rotating disc and scraper. This while in motion separates oil from the fluid surface to give double benefits namely, Cleaning solution is recycled which enhances the service life of cleaning bath and oil can be reused after filtration.

Heavy duty buffing machines from 0.25 to 7.5 H.P. are available in two or four ball bearings. Construction of the machines are made sturdy and robust to offer vibration free performance. All Bench Polishers are equipped with reversely, threaded tapered spindles to take buffing mops.

Tailor made solutions for all type of Water & Waste Water Treatment Solutions