Melt Flow Index Tester Dealers in Mulund, Mumbai (5 products available)

• Certification: ISO 9001:2008 Certified
• Condition: New
• Frequency: Flow Reading
• Automatic Grade: Automatic
• Feature: Easy To Use
• Feature: Strong Construction, Minimal Maintenance, Optimum Functionality
• Use: Used for Evaluating the Flow Properties of Molten Plastics
• Quality: Optimum Quality

We offer a wide range of Melt Flow Index Tester widely used to determine the melt flow index of plastic material. This system is structured with a heated extruder tube, an interchangeable jet and a piston with dead weights. This piston is used to apply the required pressure on the material inside the carbon steel extruder tube. A Bend Heater is affixed around outer circumference of the extruder tube and is used as an effective heating material. This heater is covered with a mineral wool insulation. The extruder tube is installed with a PID controller to indicate & control the temperature. Manufactured in accordance to the ASTM D 1238 & equivalent standards, this range of testers is available in various models with different parameters.Construction of the metal flow index tester: The assembly is fixed on a rigid stand. The bottom of the tube is lagged with an insulation of PTFE to prevent sticking of the extrudate The jet through which the extruder is pushed out is made from hardened and ground die steel The piston made from silver steel relieved at the upper end is provided to push the extrudate out of the jet. The piston moves inside the cavity of tube. A sleeve to provide to guide the relieved portion of the piston The plate-form is thermally insulated from the load. The extruder tube assembly is mounted on a metal box. A sheet metal control panel is mounted on the side of the equipment & houses the PID Controller, digital preset timer & other electronic components. Cleaning tools for tube cavity, jets, stoppers and cutters for the extrudate are also available with the equipment. The top of the piston carries a plate-form for keeping the load on.

We offer a wide range of Melt Flow Index Tester widely used to determine the melt flow index of plastic material. This system is structured with a heated extruder tube, an interchangeable jet and a piston with dead weights. This piston is used to apply the required pressure on the material inside the carbon steel extruder tube.

• Features: Two-zone band heater, Touch-screen control, Quick die release, Moveable oven for easy clean, Cut the extrudate automatically at user preset intervals, Powerful data analysis and control software
• Temperature working range: 50oC to 450 oC
• Temperature rising time: <30min
• Temperature fluctuation: ± 0.5 oC
• Temperature display error: ≤± 0.2 oC
• Temperature recovery time: <4min
• Accuracy of timer: 0.01s
• Cut-off time interval: 1-36000s
• MVR measurement accuracy: ±0.03%F.S
• Piston displacement accuracy: 0.02 mm
• Piston displacement resolution: 0.005 mm
• On board multi-weight system including following weights: 0.325, 1.20,2.16, 3.80,5.00, 10.00, 21.60 kg
• Accuracy of weight: ± 0.5%
• Power supply: (220-15% ∼220+10%) VAC 50Hz 800W
• Dimension (L x W x H): (630 x 690 x 1500) mm
• Weight: About 180kg

• Material: MS
• Color: White
• Model Name/Number: MFI-2322
• Voltage: 220 V
• Type Of Testing Machines: MFI
• Temperature Range: 100 to 450degree
• Usage/Application: For Polymer Granules
• Packaging Type: Wooden Box
• Display Type: Digital
• Load Capacity: Motorized

Melt Flow Index Tester, Calibration, TEAR CUTTER, Izod Impact Tester