Mujtaba Marine Pvt Ltd Chembur, Mumbai, Maharashtra

The CD100 range of water-blasters and water-jetting machines goes from 250 to 200 Bar with pump flows from 21 to 167 L/min. The pump are driven by a 4 cylinder water cooled Turbo charged SISU diesel engine and the all enclosing frame is made in hot dip galvanized steel for durability and corrosion resistance and is primed and painted for a nice appearance. The machine foot print is 2100 x 950mm of floor space. The frame are equipped with rubber feet under all four corners and the machine have forklift pockets as well as lifting eyes in all four corners. The machines have galvanized roof plates with side railings for protection and storage of forexample high pressure hoses.General specifications:Max pump speed- 750 rpmEngine- 4 Cyl. Sisu Turbo Diesel Water cooledEngine power- 100 HpEngine rpm- 1800 rpmTank- 140 LMax fuel consumption- 16.0 L/hNoise (1m)- 84 dBaDimensions- 2250mm x 950mm x 1300 mmWeight- 2000 kg

The CD100 range of water-blasters and water-jetting machines goes from 250 to 200 Bar with pump flows from 21 to 167 L/min. The pump are driven by a 4 cylinder water cooled Turbo charged SISU diesel engine and the all enclosing frame is made in hot dip galvanized steel for durability and corrosion resistance and is primed and painted for a nice appearance. The machine foot print is 2100 x 950mm of floor space. The frame are equipped with rubber feet under all four corners and the machine have forklift pockets as well as lifting eyes in all four corners. The machines have galvanized roof plates with side railings for protection and storage of forexample high pressure hoses.

WATER BLAST NOZZLES TYPE WBNContracor water blast equipment has been specifically designed to meet growing customer demand for a multi-purpose cleaning system that is fast, economical and environment-friendly.Field of ApplicationDust-reducing high-performance cleaning of steel, stone and concrete surfaces. Cleaning up to grade SA-3.0. Performance up to 20% higher than dry blasting. Designed to work with any water matching abrasives, max. grain size 3.5 mm.CharacteristicsWater blast nozzles for wet blast applications. Made from high grade tungsten carbide. Jacket: Aluminium. Thread: 50-mm coarse aluminium thread.

WATER BLAST ATTACHMENT WBAContracor water blast equipment has been specifically designed to meet growing customer demand for a multi-purpose cleaning system that is fast, economical and environment-friendly.Field of ApplicationDust-reducing high-performance cleaning of steel, stone and concrete surfaces. Cleaning up to grade SA-3.0. Performance up to 20% higher than dry blasting. Designed to work with any water matching abrasives, max. grain size 3.5 mm.CharacteristicsUniversal Water Blast Attachment. Sleeve made from high grade tungsten carbide. Fits all Contracor blast nozzles. Jacket: Aluminium. Thread: 50-mm coarse aluminium thread.

Warm Melt Supply Systems  Bulk Melt UnloaderBulk unloader for warm melt materials and temperature conditioning applicationsDesigned specifically for sealants or adhesives that need to be warmed up to 100°C (212°F), Graco Warm Melt Supply Systems deliver superior temperature control. Ideal for temperature conditioning applications. An excellent alternative to water-jacketed solutions.Features:Bridges the gap between hot melt and ambient supply systemsModular approach provides easy snap-on installation and eliminates complex point-to-point wiringIntuitive, easy-to-use interfaceConfigurable to fit your unique application and materialMaterials:Epoxy Sealants and AdhesivesApplications:High-Viscosity Material TransferBulk Supply SystemMedium-Viscosity Material TransferResin Batch BlendingPrepreg SupplyIndustries:Automotive Trim and General AssemblyBody Shop SealingPaint Shop SealingElectronics ManufacturingFurniture Finishing / ManufacturingMarine

Description:Plastering machine is a small-size, dry-mixed mortar transfer pump,  which is suitable for materials less than 5mm, such as ready-mixed dry mortar that can be pumped.It can be your spraying machine if it is equipped with our small-size air compressor, spray gun or relative accessories Applications:It is composed of many independent components. The volume and handy design facilitate the transportation of the machine.

Country of Origin : 380V 3 Phases

Viscon Fluid Heaters  High performance fluid heatersProvides excellent temperature conditioning for high solids coatings and high viscosity materialsGraco's Viscon heaters maintain optimal temperatures to provide consistent control of fluid viscosity. With a wide temperature operating range, Viscon heaters are excellent for any coating, sealant, adhesive or lubricant you need to pump.Viscon HF High Flow Fluid Heaters- Designed for high flow rates, with more power for faster material heatingViscon HF Fluid Heaters for Explosive Atmospheres- Developed to handle the highest viscosity coatings such as 100% solids epoxies coatings and epoxy fireproofing materialsViscon HP High Output Fluid Heaters- Offers high pressure (7250 psi/500 bar) for use with most pumpsFeatures:Viscon HF High Flow Fluid Heater:Spiral passages provide three times the flow rate of standard Viscon heatersEfficient and powerful for faster material heating - gets the job done fasterAvailable in manual thermostat or externally controlled versionsExcellent for high solids coatings and protective coatings materialsEasy to clean and maintain7250 psi (500 bar, 50 MPA)Temperature operating range: 84 to 219°F (29 to 104°C)Viscon HF Fluid Heaters for Explosive Atmospheres:The patent-pending design has a triple-path spiral core that can be easily disassembled for cleaning.Increased flow capacity: The Viscon HF has over three (3) times more flow capacity compared to the standard Viscon HP heaters.  Increased heat capacity: The Viscon HF heaters have 35% more wattage; 5400 watts compared to 4000W for the standard Viscon HP heaters.Available in manual thermostat or externally controlled versions.Cleanable and replaceable fluid core – repair instead of replace.7250 psi (500 bar, 50 MPA) pressure rating – handles the highest pressure rating of Graco protective coating sprayers.Temperature operating range: 84 to 219°F (29 to 104°C)Same mounting configuration as standard Viscon HP heaters – Easy to retrofit onto existing equipment.Viscon HP High Output Fluid Heater:Higher pressure for use with most pumpsExcellent for high solids coatings, adhesives or resins7/16 in (11 mm) diameter fluid passagesStainless steel designAvailable in standard or explosive atmosphere versions7250 psi (500 bar, 50 MPa)Temperature operating range: 84 to 219°F (29 to 104°C)

Tungsten Carbide Lined Angle CAM SeriesA CAM angle nozzle is designed to blast blind surfaces such as mold cavities or behind beams. Tungsten Carbide lined, the nozzles are available in one or three outlets. Description of OperationThe operator inserts the included nozzle washer into a nozzle holder and screws in the nozzle, turning it by hand, until it seats firmly against the washer.With all related equipment correctly assembled and tested, the operator points the angle nozzle at the surface to be cleaned and presses the remote control handle to begin blasting. The operator holds the nozzle 18 to 36 inches from the surface and moves it smoothly at a rate that produces the desired cleanliness. Each pass should overlap slightly.The operator must replace the nozzle once the orifice wears 1/16-inch beyond its original size.Advantages:Tungsten Carbide is the most rugged and durable liner materal and provides the best value.Has a 45 degree outlet angle and is available in one or three outlets.1-inch entry provides smooth transition

 fatigueFeatures:High quality finish, low pulsation output and smooth pump changeover deliver a consistent spray patternQuick color changes and fast material refills save time and moneyRugged, stainless steel or aluminum construction pump handles a wide variety of fluidsMaterial:Solvent Based-PaintSolventborneSingle ComponentVarnishesLacquersEnamelsLatexHigh solidsCARCMetallicsStainsEpoxiesApplications:Light Commercial PaintingModerate CommercialHeavy CommercialGeneral Metal Finishing-PumpingGeneral Metal Finishing-SprayingWood Finishing-PumpingWood Finishing-SprayingPlastic Finishing-PumpingIndustries:Furniture Finishing/ManufacturingGeneral Metal Finishing/ManufacturingWood Products ManufacturingMarineRailroadsTruckingFleetsWood & Wood Products-PumpsWood & Wood Products-Spray gunsHeavy equipment ManufacturingAgricultural Equipments/ManufacturingAutomotive ManufacturingCARCPersonal Recreation VehiclesRVsAerospace FinishingForestry Equipments

Triton Pump Packages  Fine Finish Spray PackagesApply a high quality, decorative finish to wood and metal parts with this double diaphragm pump packageTriton is an air-operated diaphragm spray package that applies a high quality, decorative finish to wood and metal parts. It is a more effective alternative to traditional pressure pots and standard diaphragm pumps.Supplies up to 35% extra air flow to gun for superior atomizationSaves material and time during flushing, priming and color changesDelivers a consistent spray pattern and uniform film thicknessSprays a wide variety of material viscositiesReduces operator fatigueFeatures:High quality finish, low pulsation output and smooth pump changeover deliver a consistent spray patternQuick color changes and fast material refills save time and moneyRugged, stainless steel or aluminum construction pump handles a wide variety of fluidsMaterial:Solvent Based-PaintSolventborneSingle ComponentVarnishesLacquersEnamelsLatexHigh solidsCARCMetallicsStainsEpoxiesApplications:Light Commercial PaintingModerate CommercialHeavy CommercialGeneral Metal Finishing-PumpingGeneral Metal Finishing-SprayingWood Finishing-PumpingWood Finishing-SprayingPlastic Finishing-PumpingIndustries:Furniture Finishing/ManufacturingGeneral Metal Finishing/ManufacturingWood Products ManufacturingMarineRailroadsTruckingFleetsWood & Wood Products-PumpsWood & Wood Products-Spray gunsHeavy equipment ManufacturingAgricultural Equipments/ManufacturingAutomotive ManufacturingCARCPersonal Recreation VehiclesRVsAerospace FinishingForestry Equipments

T1, T2 and T3 Transfer Pumps  Transfer Pumps is Ideal for moving A and B materials to Reactor spray machinesGraco's family of transfer pumps maintain performance in any environment. Transfer pumps are required to feed chemical to your Reactor spray machine or any other equipment requiring fluid transfer. Consider your material viscosities, desired output rate, interior ceiling height of your rig, and available air pressure when choosing your ideal transfer pump.Features:Provide consistent feed pressures and flow rates for dependable resultsLower pressure drops with higher viscosity materials at any ambient temperatureDesigned and manufactured by the worldwide leader in pump technologyLonger lasting pump - designed for durability with less maintenanceQuick-release bung adapter for easy drum removal without interference from hose connectionsStainless steel wetted parts for corrosion-resistancePTFE seals for improved performance and less maintenance

Priming Piston PumpOne of the most reliable priming piston ink pumps in the industry! With higher pump pressures and flow rates, Graco priming piston pumps handle a broad range of inks with ease. They offer durability, power and reliability in many ink manufacturing or printing applications.Features:Produces up to 2400 psi when mounted on a 2100 pumpPositive displacement, priming piston design provides uniform and easily-controlled deliveryEvacuates with pails, drums and bins with easeExtremely durable pump with long-life packing design, and low maintenanceMaterial:Inks and ColorantsApplications:Ink TransferIndustries:Printing and Publishing - Ink TransferInk Transfer

SURFACE ROUGHNESS COMPARATOR GRIT, SHOTA precision nickel comparator plate which conforms to International Standard ISO 8503 for grit and shot blast surface roughness comparison measurement.Comparators allow the estimation of surface roughness by touch and sight. They are split into four sections, each with a different and defined roughness.Comparators are available in both grit and shot blasted versions.The grit version is split into sections equivalent to 25, 60, 100 and 150 microns.The shot version is split into sections equivalent to 25, 40, 70 and 100 microns.

Supa Blast HoseClemco Supa blast hose is standard equipment on all Contractor Series Blast Machines. Supa hose is lighter and more flexible than 2-braid or 4-ply blast hose of the same ID. It can be used with all common blast media. Supa hose achieves its lightness and flexibility from its slightly thinner outer casing. The inner tube is made from SBR rubber.Description of OperationClemco Supa blast hose is fabricated to fit Clemco couplings and nozzle holders. The blast hose inner diameter (ID) should be 3 to 4 times the size of the nozzle orifice and the same size as the nozzle entry diameter. The hose ID should be the same size or larger than the machine piping.For applications where heavier 2-braid or 4-ply blast are used (for their more durable outer casing) a 10 to 15 foot length of Supa hose can be connected as the last section before the nozzle. This whip hose is easier for the operator to maneuver.Advantages• Inner tube wall of SBR rubber treated with static-dissipating compound• Reinforced outer casing of cloth and rubber-impregnated fiber winding• Casing is pin-pricked to prevent formation of air pockets between layers• More flexible than 2-braid or 4-ply blast hose• Lighter weight and slightly smaller OD make it a better whip hose 

SUCTION BLAST CABINETS CAB-110S, CAB-135SIndustrial use all-in-one blast cabinet includes injection blast system, blast media reclaimer and pulse cleaned cartridge dust collector.Field of applicationAbrasive blasting applications including cleaning, deburring, deflashing, finishing, peening and decorating. Build for long lasting industrial use for operation with fine or light abrasives.STANDARD DELIVERYAll-welded blast cabinet, ready to use assembled with media recovery hoses, abrasive metering valve, transparent media delivery hose, air hose, GX manual blast gun with GXT-8 tungsten carbide nozzle, lined rubber gloves RGS-800, pilot operated control valve, foot valve with remote control hoses, air filter with manual drain valve, cartridge dust filter, timer operated pulse jet cleaning system, safety and disposable glass window assembly.    Externally located ceilingdual fluorescent lighting offers excellent view of interior.    Durable pneumatic controlsOffers greater reliability than electric controls that often stick and burn.    Large cartridge filtersurface aria traps over 99% of dust down to 0.5 micron.    Large dimensioned cyclonereclaimer with good accessible door and easy removable screen.

Manufactured hypereutectoid steel abrasiveGrey, metal spheresUsed in airless wheel blast machines to clean foundry castings, surface polishing and shot peeningAlso used in portable trackblast airless wheel blast machines for concrete floor preparation and profilingVery long lastingCan be recycled many timesPacked in 25kg bagsSpecial, stainless steel shot and high hardness specification shots available. 

Silver Plus Gun  Manual Airless Guns Known for its durability, long life, spraying performance, and comfortable design, it is the preferred gun for high pressure applicationsGraco's Silver Plus Gun is known for its durability, long life, spraying performance, and comfortable design. It is the preferred gun for high pressure applications.Silver Plus Product HighlightsReverse-A-Clean tip design to reduce downtime caused by frequent tip plugging5000 psi (345 bar, 34.5 Mpa) fluid rating for spraying the toughest materialsSST wetted parts for material compatibilityFeatures:Lightweight, Rugged Design - Forged aluminum is durable to withstand harsh work environmentsExclusive needle design - no trigger adjustments needed2-Finger trigger design and handle is form fitted for less fatigueStainless steel fluid tube - ability to spray heavier materials such as high solid coatingsRAC X Switchtip and Handtite guard provides exceptional life, pattern and finish

LineLazer V 250SPS  Self-Propelled Line Striping SystemThe LineLazer IV 250SPS is a stand-on line striping solution for improved visibility and razor sharp lines.High performance striping with the exclusive automatic paint guns makes the LineLazer V 250SPS the preferred striper for professional contractors who demand hydraulic power. This striper is ideal for large, heavy-duty line striping jobs including parking lots and road jobs.Features:1.HP Automatic Series Features:EasyMark Gun Adjustment System—Simple guide mark and gun placement system allows for perfect gun set up every timeAutomatic Gun Control System—Manual or automatic paint and bead guns with the push of a buttonAuto-Layout II—Exclusive Green Laser Guidance cuts layout time in half (country dependant)Data Logging with J-Log System—On-board job information for proof of completionOn-Board Power—12V battery for all your accessory itemsGraco Hydraulic Motor System—No-Stall design provides uninterrupted performance25-Gallon (95 L) Paint Hopper—Extended striping time with large capacity hopperEndurance Piston Pump System—Long life pump provides precise flow for wide range of striping materialsExclusive Self-Centering Front Wheel—Provides simpler operationRear Gun Mount System—Provides straighter long linesHonda 13 hp GX Engine—Electric start for ease of use2.HP Reflective Series Includes All HP Automatic Series Features PLUS:EZ Bead Pressurized SystemInnovative bead tank with unmatched performanceProvides perfect bead embedmentAir valves to dial in starts and stopsInstalled and ready to goDual Bead Tanks hold up to 240 lbs of beads (120 lbs each)Material:Road-Marking PaintApplications:Parking LotsRoad StripingAirportsCity StreetsIntersectionsSports Field Marking

Seasonal Light-Duty Blast SuitThe Clemco light-duty blast suit protects the operator from the impact of rebounding abrasive. The suit is a cost-effective alternative to a heavy-duty suit for intermittent or short-term blasting, and for non-blast personnel working at the blast site. It weighs less than Clemco's heavy-duty blast suit. The nylon and cotton construction is easily machine washable. Discarding the light-duty suit after a toxic dust job wastes less money. For rental outlets, the low-cost suit makes it possible to stock suits in sizes to fit almost any customer. (Optional gauntlet gloves protect hands and wrists.)AdvantagesWeighs less and costs less than Clemco's heavy-duty blast suit.Nylon and cotton construction is easily machine washable.Discarding the light-duty suit after a toxic dust job wastes less money.For rental outlets, the low-cost suit makes it possible to stock suits in sizes to fit almost any customer.

High performance abrasive blasting of metal constructions andbuildings, bridges, reservoirs, piping, concrete surfaces.- Cleaning up to grade SA-3,0.- Performance up to 37 m2/h.- Designed for working with any dry abrasives, max. grain size 3,5 mm. STANDARD DELIVERY 100- /200-liter capacity tank, screen, cap, sand valve, highperformance moisture separator, inspection door, quick hose couplings Remote control device (RC) with a pneumatically-operated RC main valve, deadman handle, 40-meter twin-line hose, hose fittings. CAF3 All Contracor ® abrasive blasting machines are equipped on standard delivery with a highly efficient CAF-3 moisture separator to prevent the entry of moisture and oil from the compressor into the tank.

RLX Pneumatic Control HandleControl handle for remote activation and deactivation of an abrasive blast machine. Fail-to-safe system stops blasting if operator drops or loses control of the handle. For use with Clemco remote control systems only.OSHA regulations require remote controls on all abrasive blast machines. Pneumatic remote control systems operate efficiently with up to 100 feet of twinline control hose. Electric remote control systems operate efficiently at distances up to 500 feet. For distances greater than 300 feet, special remote control cable is required.Requirements for OperationThese items are required but are not included with the handle:• Twinline remote control hose (for pneumatic handles)• Electric cord (for electric handles)• Blast machine fitted with Clemco remote control valves• Power source (for electric handles)Description of OperationPressing the remote control handle activates the system and starts blasting; releasing the handle stops blasting. Whenthe handle is released, a spring-loaded lever mechanism keeps the handle from accidentally activating the system.The pneumatic handle utilizes twinline hose (both sides of the twinline are 3/16" ID). Air travels out one side of the twinline hose and escapes from an orifice in the handle. When the handle is pressed, a rubber button blocks theorifice, diverting the air back along the other side of the twinline hose. The returning air activates the remote controlvalves to begin blasting.Electric remote controls use an electric cord and micro-switch in place of the twinline hose and orifice used in pneumatic handles. Electric handles operate on 12 volts.(NOTE: Remote control systems operate on 12-volt DC or 120-volt AC, but for safety, the power to the handle isalways reduced to 12 volts.)All Clemco remote control valves operate pneumatically. The electric signals from the remote control handle operate solenoids that, in turn, operate the pneumatic remote control system.WARNING!Never modify or substitute remote control parts. Parts from other manufacturers are NOT compatible with Clemco equipment.Advantages - Pneumatic• Meets OSHA requirement for remote control system• Relatively inexpensive• Twinline hose cannot be connected incorrectly• Simple design is easy to serviceAdvantages - Electric• Meets OSHA requirement for remote control system• Fast response at distances up to 500 feet• Low-profile, threaded connectors secure neatly to hose 

RLX Electric Control Handle Control handle for remote activation and deactivation of an abrasive blast machine. Fail-to-safe system stops blasting if operator drops or loses control of the handle. For use with Clemco remote control systems only.OSHA regulations require remote controls on all abrasive blast machines. Pneumatic remote control systems operate efficiently with up to 100 feet of twinline control hose. Electric remote control systems operate efficiently at distances up to 500 feet. For distances greater than 300 feet, special remote control cable is required.Requirements for OperationThese items are required but are not included with the handle:• Twinline remote control hose (for pneumatic handles)• Electric cord (for electric handles)• Blast machine fitted with Clemco remote control valves• Power source (for electric handles)Description of OperationPressing the remote control handle activates the system and starts blasting; releasing the handle stops blasting. Whenthe handle is released, a spring-loaded lever mechanism keeps the handle from accidentally activating the system.The pneumatic handle utilizes twinline hose (both sides of the twinline are 3/16" ID). Air travels out one side of the twinline hose and escapes from an orifice in the handle. When the handle is pressed, a rubber button blocks theorifice, diverting the air back along the other side of the twinline hose. The returning air activates the remote controlvalves to begin blasting.Electric remote controls use an electric cord and micro-switch in place of the twinline hose and orifice used in pneumatic handles. Electric handles operate on 12 volts.(NOTE: Remote control systems operate on 12-volt DC or 120-volt AC, but for safety, the power to the handle isalways reduced to 12 volts.)All Clemco remote control valves operate pneumatically. The electric signals from the remote control handle operate solenoids that, in turn, operate the pneumatic remote control system.WARNING!Never modify or substitute remote control parts. Parts from other manufacturers are NOT compatible with Clemco equipment.Advantages - Pneumatic• Meets OSHA requirement for remote control system• Relatively inexpensive• Twinline hose cannot be connected incorrectly• Simple design is easy to serviceAdvantages - Electric• Meets OSHA requirement for remote control system• Fast response at distances up to 500 feet• Low-profile, threaded connectors secure neatly to hose 

remote control system for blast vesselsthe remote control system is used by a single abrasive blasting operator for starting up and shutting down the blast machine. the remote control system comprises a remote control rcv valve and remote control dmh handle, which are connected by a twin hose.rcv remote control valvethe rcv remote control valve is used for controlling the compressed air feed to the machine while simultaneously controlling air blow-out from the machine. both control functions run concurrently when the dmh handle is pressed or released by the abrasive blasting operator. Air is bled from the tank via a damper, which is included in the delivery set.    dmh remote control handlethe dmh remote control handleis fastened to the nozzle and connectedto the rcv remote control valveusing a dual hose.design featuresthe rcv remote control valve responds when the dmh handle is pressed. the blast machine's tank is pressurized and the abrasive blast cleaning process begins. when the dmh handle is released, the rcv remote control valve closes, the abrasive blast cleaning process terminates and the machine's tank depressurizes.