Relays Dealers in Mumbai (325 products available)

We are offering relays. a relay is an electrically operated switch. Many relays use an electromagnet to operate a switching mechanism mechanically, but other operating principles are also used. Relays are used where it is necessary to control a circuit by a low-power signal (with complete electrical isolation between control and controlled circuits), or where several circuits must be controlled by one signal. The first relays were used in long distance telegraph circuits, repeating the signal coming in from one circuit and re-transmitting it to another. Relays were used extensively in telephone exchanges and early computers to perform logical operations. a type of relay that can handle the high power required to directly control an electric motor is called a contactor. Solid-state relays control power circuits with no moving, instead using a semiconductor device to perform switching. Relays with calibrated operating characteristics and sometimes multiple operating coils are used to protect electrical circuits from overload or faults; in modern electric power systems these functions are performed by digital instruments still called "protective relays"

A solid-state relay (SSR) is an electronic switching device that switches states when an external voltage is applied along its n-type and p-type junctions. SSR has a small control signal that controls a larger load current or voltage. It consists of a sensor which responds to an appropriate input (control signal), a solid-state electronic switching device which switches power to the load circuitry, and some coupling mechanism to enable the control signal to activate this switch without mechanical parts. The relay may be designed to switch either AC or DC to the load. It serves the same function as an electromechanical relay, but has no moving parts. Solid-state relays are composed of semiconductor materials, including thyristors and transistors. Solid-state relays have current ratings that extend from a few microamps for low-power packages up to around a hundred amps for high-power packages. Solid-state relays have extremely fast switching speeds usually ranging between 1 to 100 nanoseconds. Solid-state relays are not easily affected by contact wear. Solid-state relays have several shortcomings: a high susceptibility to damage (a relatively high vulnerability to overloads in comparison to electromechanical relays); limited switching arrangements (SPST switching); a need for finer tuning due to high "on" resistances.  

• Nominal Operating Power:: 1.6 W
• Voltage:: DC 12 V /24 V
• Usage/Application:: Auto
• Dimension:: 42.2*44.8*54.5 mm
• Operating Current:: 30 A

Quality being the major concern of our organization, we keep a stringent check on the production, packaging and delivery processes. We are mumbai(India) based organization, involved in providing high quality array of products at competitively low prices.

We are a supreme manufacturer, supplier and exporter of dc motor protector (sn-25). The sn-25 series is a high current motor protector which delivers the benefit of locked rotor and overload protection in a robust integrated package. the sn-25 series has been designed to offer protection for a wide range of 12 volt to 48 volt applications in a minimum package size. The sn-25 series is suitable for both intermittent and continuous rated motors. The sn-25 is also designed for manual switching operations. The sn-25 is physically small and has unique 'snap action' bimetal disc, ensuring a positive make and break switching action for enhanced contact life. Has unique 'snap action' bimetal disc, ensuring a positive make and break switching action for enhanced contact life. features tin plated steel base and tab available in covered and uncovered versions designed to trip time or temperature specifications multiple bimetallic resistivities available applications over current and temperature protection in dc motors refrigerator compressors dc blowers engine cooling fan motors pump motor window lift motors front and rear wiper motors sun roof motors adjuster motors antenna lift motors door lock actuators wiper motors sliding door motors rating nominal operating voltage : 12-48 volts dc typical voltage drop at operating current : 200 mv max cut-off temperature range : 60oc to 166oc operating trip current range : 10-125 amps selection code sn-25nc( graph the current vs trip time graph shows that whenever there is a locked rotor condition and the current exceeds 2.5 times the rated current the circuit is opened by sn-25 within 4-7sec without harming the motor.

Range : Type PK -1 : Various ratings from 2.5 A=4A to 9A-14 A Type PC -1 : Various ratings from 1 A= 1.6 A to 11A-18A Type PC-23 : Various ratings from 9 A= 14A to 28A-42 A Salient Features * ISI Marked Power Contactors * Trip class : 10A * Suitable for direct mounting on contactors * Manual reset type * Satisfactory operation at all ambient temperature from -5 °C to 55 °C

• Current Type: AC
• Mounting Type: PCB Mount
• Usage: Factories, Power Plants
• Packaging Type: Carton Box

We have various types of relays like electromechanical, power  industrial , telecommunications, automobile relays ,we also have Keltron and samwha capacitors. 

• Brand Name: CONTEC ELECTRONICS

We are offering relay.a relay is an electrically operated switch. Many relays use an electromagnet to operate a switching mechanism mechanically, but other operating principles are also used. Relays are used where it is necessary to control a circuit by a low-power signal (with complete electrical isolation between control and controlled circuits), or where several circuits must be controlled by one signal. The first relays were used in long distance telegraph circuits, repeating the signal coming in from one circuit and re-transmitting it to another. Relays were used extensively in telephone exchanges and early computers to perform logical operations. A type of relay that can handle the high power required to directly control an electric motor is called a contactor. Solid-state relays control power circuits with no moving, instead using a semiconductor device to perform switching. Relays with calibrated operating characteristics and sometimes multiple operating coils are used to protect electrical circuits from overload or faults; in modern electric power systems these functions are performed by digital instruments still called "protective relays"

We bring forth precisely designed Tata Ace Relays and Controllers for our valued clients. Tata Ace Relays and Controllers that we offer have gained appreciation among spare parts dealers and TATA Ace service center owing to their accurate designed and performance. Keeping in mind diverse requirements, we Tata Ace Relays and Controllers make available in different specifications. Availability Glow Plug Timer RelayFan ControllersTemperature SwitchStart Stop Controller Tata Ace etc.

Introduced in 2000. the instruments are used for variety of control, alarm and tripping applications.The instruments serve to replce other more expensive equipments.These meters are exclusively developed at NMC for utter reliability under Industrial Conditions.The KW (&MW) and Kvar (&Mvar) meters employ a true 4-quadrant multiplier exclusively developed at NMC for accurate true RMS measrement.This instruments are fully solid state, field proven reliability, microcontrol design, low power consumption and avalable for LT & HT application.Features:Available for current AC & DC, Voltage AC & DC, Frequency Process signals 4 20 mA & 0-5 V DC,KW (MW) for single, double & triple element single and three phase and Kvar (Mvar) for double element three phase.MRD-A : Used for over current under current protection.MRD-V : Used for over Voltage, under Voltage protection.MRD-F : Used for over Frequency under Frequency.MRD-PV :Used for over Process applicationin conjunction with process               transducers.MRD-W: Used for Over load underload alarm & trip..MRD-W: Used for Demand Monitoring- alarm and trip.MRD-W: Used for economical running of star-delta amotors.MRD-var:Used for Single Step Kvar control for HT or LT application.MRD-W+ MRD-var: Used for Import / Export of power.DimensionS: 96mmX96mmX100mm

We are eminent Manufacturer and Supplier of superior grade Solid State Relay. The Solid State Relay offered by us possesses matchless features, long life and excellent quality. Backed by our diligent personnel, we offer Solid State Relays in different models. We design and develop these Solid State Relays in standard as well as custom build packages. One can avail the Solid State Relay from us at cost effective price. Features Of Solid State Relay Optically IsolatedFaster SwitchingOutput Snubber Circuit IncludedHigh Surge Rating AllowsLed IndicatorNoiselessLow Consumption InputZero Current Switch-OffProtection Cover

We have a strong foothold as Importer, Exporter and Supplier of Electronic Relays in Maharashtra, India. We have close associations with the reputed manufacturers who make use of ultra-modern machines and latest techniques for their designing so that the quality stays intact. Our Relay Electronics Components are performance oriented assuring longer service life. We pack them in strong materials for easy handling during storage and transit.

• Relay Type: Voltage Relay
• Brand Name: GOODSKY
• Current Type: DC
• Voltage: 12VOLT

• Number of Poles: As Per Requirement
• Country of Origin: Made in India
• Voltage: 24V-220V DC
• Brand: ABB.Ashida,Alstom,CGL,Reputed
• Type: Master Trip Relay
• Power Source: AC/DC  

• Voltage: 110 to 115Vac or 220 to 230Vac
• Type: Flame Detector Relay
• Current (Amp): 5.5-8 amp
• Brand: Honeywell
• Model Name/Number: R4343E1048
• Current: 2amp at 0.65 Power factor

• Frequency: 47 - 63Hz
• AC Input Range: 180V TO 270VAC
• Rhodium Plating: UP TO 3 Ltr. to 35 Ltr.
• Gold Plating Rectifier ranging from: 300W to 13KW

• Brand Name: UV
• Voltage: 220 V
• Frequency: 50-60 Hz
• Number of Poles: 2
• Current Rating In Amps: 1A
• Minimum Order Quantity: 1 Unit(s)

80A switching capability Very small contact resistance, hence negligible temp rise inside relay. Pulse driving, single or double coil Low power consumption- 1W / single coil, 2W / double coil Contact form 1-B Custom assemblies available with braided copper wire and / or copper straps, welded to brass terminals.

We are a Dealer, Supplier of Pla Relay. We stock and supply running models are Pla Relay Dealer, Pla Relay Supplier. We are supplier in India, Mumbai, Delhi, Ahmadabad, Chennai, Pune, Nashik, Vapi, Aurangabad, Nagpur, Sangli, Satara, Ichalkarnji, Solapur, Kupwad, Kolhapur, Pimpri, Chinchwad, Jalgaon, Silvassa, Surat, Baroda, Morbi, UAE, Indore, Bhopal, Gurgaon, Faridabad, Ghaziabad, Noida, Coimbatore.

• Country of Origin: India
• Color: Blue
• Condition: New
• Current Type: DC
• Mounting Type: Base Mounting
• Power Consumption: 2W-5W

Offered By Us is dc Earth Leakage Relay that Works By Measuring Differential Current Between Both the –ve and +ve Current Carrying Conductors. the Dc Earth Leakage Relay Provided By Us is Supplied to Far Flung Areas of the World Through the Wide Spread Network of the Company. used For localizing and Detecting Earth Leakages in Dc Power Systems specifications sensor: back Panel Mountable with An Opening Provided for Passing the -ve and +ve Conductors Through. Size of Opening is 50 Mm Dia (smaller Dia Sensors are also Available )detectorsensing Range : + - 5 1020 Ma Selectable By Shorting Terminals On the Unit indication : +ve Leak, -ve Leaktime Delay : 10 Seconds for Turn On and Turn Offauxiliary Supply : 20 to 80 V, or 80 to 300 V Acdctrip Output : 1 Changeover Contact On Leakage Exceeding Set Valuecontact Rating 5 a 230v Ac 30 V Dcreset : auto or Manual Selectable By Shorting Terminals On the Unitmanual “reset “ Button Provided On the Unit dimensionssensor : 113mm X 30mm X 105mm ( 50mm Opening ), 87.5mm X 26mm X 81mm (20 Mm Opening )detector Unit : 70 Mm X 100 Mm X 110 Mmaccessories : cable Between Detector and Sensor of 2 Metre Length

• Material: Aluminium
• Color: Black
• Voltage: 220V
• Finishing: Polished
• Packaging Type: Carton Box
• Phase: Triple Phase
• Number of Poles: 4 Pole
• Terminals: 9 Terminal

We deal in a wide range of Electronic Overload Relay, manufactured by "ABB". The Electronic Overload Relays are acknowledged for high performance and long life. We can make available the Electronic Overload Relays in different specifications, depending on the information stated by customers. We can entertain orders, even at short notice. And this makes us the most approachable Electronic Overload Relay Supplier from Maharashtra.