Safety & Pressure Relief Valves Dealers in Goregaon East, Mumbai

Body Materials: SS 316, SS 316L, SS 321, Duplex 2205, Titanium, Alloy 400, Alloy 625, Alloy C-276. Pressure Rating: 3000psig (203 bar), 6000psig (413 bar), 10000psig (690 bar) @ 38°C (100°F). Temperature Rating: -53°C (-65°F) to 232°C (450°F) with standard PTFE packing. Size: 1/4″ to 1″, End Connection: NPTM/NPTF. Threads with smooth surface finish avoid galling and help to extend the fitting service life.  

Pressure Relief Valve is a self operating valve that is used to relieve pressure by allowing the pressurized fluids to flow from an auxiliary passage out of the vessel or process system. Pressure relief valves are designed to protect chemical feed systems from overpressure damage caused by defective equipment or deadheading.

Pressure Reducing valve , Material of construction : Cast iron, Cast steel, SS 304, SS 316, Alloy Steel, Duplex, Gun metal, Bronze etc. Size: 12'' To 4''' Screwed , socket & flanged end connection

We are offering stopping plug.

2-3 Way Medium Pressure Ball Valve Technical Specification : Materials-Forged Steel/Stainless Steel Ball Seat-PTFE/GFT/CFT Body & Stem Seals-PTFE /NBR Size-1/8" Pressure Range-up to 100Bar Temp. Range -40°C +150°C End Conn. Screwed-BSP (ISO-228 T1) NPT Male/Female Extended Nipple. Accessories: Actuators, limit switches

High pressure valves in high pressure. Just visit us and mention your need so that we present you the standard goods that end your trouble and get it installed and enjoy the work without any break.

Instruction for Setting Pressure : Rotate the locknut-2 (part # 4) in clockwise direction & let it come down till available thread. Now tighten the cap (part # 3) in clockwise direction till the discharge at the outlet stops. Rotate the locknut-2 (part # 4) in anticlockwise direction & hold the cap in another spanner & tighten the locknut   Features : Oprating Temperature : 10°c to 25° c Orifice size : 6mm 100% valve are factory tested prior to despatch. Pressure can be set as per requirement.  

Pressure Relief Valve is a self operating valve that is used to relieve pressure by allowing the pressurized fluids to flow from an auxiliary passage out of the vessel or process system. Pressure relief valves are designed to protect chemical feed systems from overpressure damage caused by defective equipment or deadheading. When the set pressure exceeded, the pressure relief valve is forced to open & the portion of the fluid is diverted to the auxiliary route. As the fluid is diverted, the pressure inside the vessel or process system will drop and once it reaches the valve's resetting pressure, the valve will close. This will protect the vessel or process system from damage due to abnormal excess pressure conditions. Grosvenor Worldwide manufacture premium quality metallic and non metallic raw material to fabricate a high end range of pressure relief valves. Fitted at the discharge end, these pressure relief valves are used for curbing any damage or harm caused to the equipment and its components because of sudden increase in excessive pressure. Valves are available in �" to 3" sizes , pressure upto 350 kg/cm2, MOC in SS 304 / SS 316 / SS 316L or any other as per required. These type of valves are preferred by clients for its durability and long lasting life. Specification  Lifting Lever Stainless Steel Springs Adjustable Blow-Down Sizes: ¼” To 3” In BSP End ( Screw End)� & Flange End �� For Liquid Service, Valves Are Tested On Hydraulic Test Bench Testing Standard As Per API MOC: SS 304 / SS 316. Higher Capacity Level Pressure Relief By-Pass & Overpressure Protection Safety Relief Valve Spring Loaded

Fittings are used as intermediate connection between two parts in piping systems Fittings are available in various materials like Carbon steel, Stainless Steel , Brass.

MOC : ASTM A 216 WCB / 304 / 316 CL : 600# / 900# / 1500# / 2500# Size : 40 mm to 300 mm

With us, payment transactions will always remain secured as we follow reliable online payment gateway that is handled by a trusted e-commerce application service provider. In order to maintain high-quality standards in our offerings, we make use of the finest grade raw material. Also, we ensure that the material is sourced from the reliable places only.   Exclusive Features of our 1" & 2" Pressure Relief Valves Compact, Economical and highly reliable design. The short tail allows an easy placement for any portion of the cover. Bursting pressure adjustable from .22 to .70 Kg/sq. cm. Rugged Forged Brass body and Shutter with 1" and 2" BSP outer thread for Vertical and Horizontal mounting of the Tank. Center Rod is Made out of Brass to Ensure a Safe and Steady Service and a Long Life. Protection Built into the Cap in order to direct any Oil Spills Downward. The Valve can be used as filling Cap too.   Exclusive Features of our 3" & 6" Pressure Relief Valves Type 304 Stainless Steel Deep Drawn Diaphram with Spring Locator Convolutions. Specially designed reverse wound springs and Assemble methods provides uniform valve loading and Improved relief rates. Unique Spring retaining system on Diaphram and cover. All stainless steel fastners and hardware. Automatic Instantaneous Venting and Sealing. 100% Tested for Proper Operation and Serialized for Traceability. Pressure Die cast is porosity free. Aluminium flange and Cover are duly UV Proof Powder coated for better climate protection. IP 67 protected Switch with 1NO and 1NC contact. Brightly coloured flag, Integrated with switch, gives visual indication of valve operation by raising a flag.

High Pressure Ball Valves, Automotive Turned Componen

It is designed to seal an end run of an apparatus. (Special requirements available on request)

Brass Plug, Brass Heavy Turned Parts, Brass Terminal Block, Socket

Pressure Reducing Valve, Gate Valve