Rubber Bellow Seals Dealers in Mumbai

Owing to our renowned name, we are considered as one of the trusted Suppliers of KMJ 13 Rubber Bellow Seal. We are hailing from Mumbai(India) and make sure to reach buyer's specific destination within the promised time frame.   Feature : Uni Directinal Unbalanced Dimension Range - 8mm to 100mm Temperature Range - 150oC MAX Faces - SIC, TC, Carbon Elastomer - Viton, EPDM, Nitrile

• Material: Stainless Steel & Rubber
• Finishing: Polished
• Shape: Round
• Color: Black
• Usage: Industrial
• Certification: ISI Certified
• Type: Rubber Bellow
• Country of Origin: India

• Pressure: 6 bars
• Shaft Diameter: 12 mm to 100 mm
• Country of Origin: Made in India
• Size: 12 mm to 100 mm
• Brand: Gipfel Engineering
• Usage/Application: Mass produced Hot & Cold water Pumps for non-critical applications, Sewage Application, Gear Pump, V
• Model Name/Number: RB20
• Temperature: -20 to +160 Deg. C
• Speed: 2900 RPM
• Secondary Seal: Nitrile (NBR) / Viton (FKM) / EPDM
• Burgman Type: MG12
• Features: Single Seal, Pusher Type, Un – Balanced, Internal Mounted, Elastomeric Bellow, Rotating Single Spring, Single Helical Coil Spring, Low Cost & Mass Produced.
• Pay Mode Terms: T/T (Bank Transfer),Cheque

• Shape: Round
• John Crane: type 11m, type22m, type21
• Burgman: mg1, mg9
• Flowserve: isc1ex
• AES: b0304055253
• Colour: Silver

We are the renowned Manufacturer, Exporter and Supplier of Rubber Bellow Seals. We offer our Rubber Bellow Seals in different types such as cs1, cs21 and cs1100. These seals are widely applied in centrifugal, rotary & turbine pumps, compressors, mixers, blenders, chillers, speed reducers, and other rotary shaft equipment. Moreover, our Rubber Bellow Seals are widely demanded in industries like petrochemical & food processing, and pulp & paper.

We stand tall as Manufacturer, Exporter and Supplier of Rubber Bellow Seal (LEE-S12). We make use of top-notch quality metal and latest techniques for their fabrication so as to lift-up their longevity and performance. Whether it is a small order or bulk one, w have always executed timely deliveries without any delays.   Applications : Generally used in sewage application, waste water pumps & fuel injection pumps.  Operating Limits  Shaft Dia. - 10 to 100mm  Pressure - up to 10 Bars  Temperature - 20 to 150oC

• Brand Name: Hydro Serve
• Material: Single Coil
• Color: Silver
• Type: Mild Steel Springs
• Country of Origin: India

• Usage: Generally used in sewage applications/ waste water pumps & fuel injection pumps

Based in Mumbai(India), we have gained wide appreciation owing to our high quality products and client-centric approach. Our quality control strategies are carefully executed. Thus, our whole range of product is amongst the most sought-after in the industry.   Operating Limits : Pressure  -  10 bars (Max) Temperature  -  (-)20c to (+)150c Speed  -  20 m/s Sizes  -  2850 rpm (Max) Material  -  Seal Face  -  Carbon, Ceramic, TC Secondary Seals  -  Viton / Niton Metal Parts  -  SS 316,

• Shaft Diameter: 12 to 75 mm
• Temperature: -20 to +100°C
• Velocity: Up to 20 m/sec / 3000 r.p.m.
• Seal Ring Face :: Carbon, SiC & T.C
• Seat Face: Ceramic, SiC & T.C
• Elastomer: Viton, Neoprene, EPDM, NBR and Buna-N
• MOC: SS 316 / SS 304
• Product Code: MF-33

Applications :   Water Pumps Submersible Pumps Hot Oil Pumps.

• Pressure: 8.0bar (max...)
• Application: Generally used for Compressor for refrigeration of Ammonia & frion gas. cold water pumps for non-critical applications
• Faces: Carbon / Ceramic / Sic. / TC
• Secondary Seals: Viton / Neoprene / Nitrile
• Hardware: SS316
• Shaft Dia: 10.0mm...100.0mm 0.5 Inch...4.0 Inch
• Temprature: -20'C TO 180'C
• Velocity: 20.0m/s

The Teflon Bellow Seals are unrivalled in their ability to withstand highly corrosive fluids such as acids, alkalis, strong oxidizing/reducing agents etc.All seal components that come in contact with pumped fluid are chemically inert materials like PTFE, GFT and pure Ceramic. The heart of the seal is the flexible PTFE Below made from virgin grade Teflon. Springs and other metal parts are in Haste alloy-C, Alloy-20 etc. The rotary face is of glass filled Teflon. The Stationery face is pureceramic. These seals are always installed externally. Application The mediums are all type of strong acid, oxidant and other strong corrosive mediums.Externally mounted, single face, multiple springs and driven by pure PTFE bellows. Non-pusher, internal balance structure, fine fluctuate of compensation and reliable seals.

• Brand Name: Micro Seals

“Mechanical Seal - Rubber Bellow Seals" are most commonly used rubber bellow seal, Due to its compact design it can be easily mounted. These has a unique rubber bellow secondary seal, which provides a high degree of axialflexibiiityto compensate for lack of concentricity of the shaft & misalignment & wear due to thrust movement of the shaft.  Application Generally used in sewage applications/ waste water pumps & fuel injection pumps.   Operating Limits Pressure : 10 bars (Max)Temperature : (-)20c to (+)150cSpeed : 20 m/s Sizes : 2850 rpm (Max)   Material Seal Face : Carbon, Ceramic, TCSecondary Seals : Viton / NitonMetal Parts : SS 316.

• Type: Rubber Bellow Seal
• Pressure: 10 Bars(Max)
• Diameter: 16 mm to 100 mm
• Model No.: RI-111, RI-114
• Temperature range: -20 Degree To +150 Degree C
• Secondary Seals: Viton /EPDM /Nitrile

Supplier & Distributor of Rubber Bellow Seal. Our product range also comprises of Dry Running Agitator Seal, Multi Spring Unbalanced Seal and Spring Unbalanced Seal. Item Code: LS20 Type LS 20 are most commonly used rubber bellow seal, Due to its compact design it can be easily mounted. TYPE LS 20 has a unique rubber bellow secondary seal, which provides a high degree of axial flexibility to compensate for lack of concentric of the shaft & misalignment & wear due to thrust movement of the shaft.

• Shaft Diameter: 10...100 mm
• Pressure: 22 bar (max
• Metal Parts: SS304, SS316
• Temperature: -20...1400C
• Velocity: 15 m/sec
• Seal Faces: Carbon, Ceramic, SiC, Tung. Carbide
• Bellows: Viton, Nitrile

Type VS - 2 is unbalanced single acting helical coil spring seals independent o1 direction of rotation. The drive ring's notch design eliminates over stressing of the elastomer bellows. Slippages are eliminated, protecting the shaft and sleeve from fretting. Seal can be repaired in field with minimum spares, minimizing the downtime cost.     Seal Characteristics   Single Seal Unbalanced Conical spring Independent of direction of rotation     Application   Water pumps,Oil pumps Blowers Compressors Slurry pumps     Performance Range

Bellows series seals are Single Coil Unbalanced with elastomeric bellows designed Independent of direction of rotation seals. The seals of the series are rotate to bellows tightness on shaft.The series are work in Water, Oil & Light duties, application seal materials can be specific as requirement.

Operating Limits : Seal size  - 10mm to 100mm Pressure  - 12kg\cm2 Speed - 10m/s Temperature - 10o ..to 220oC Face Material : Rotary Face - Carbon, Sillcon, TC Stationary Seats - Silicon, TC, SS, Ceramic Type - S-6, S-60, S-9, S-4, S-13, S-50 Applications : Chemical Plant Oil Refinary Water

• Pressure: Below atmospheric to 75 p.s.i
• Size (Inches): 3/4" to 3"
• Temperature: From Cryogencics to 120o C
• Speed: 4000 RPM

All seal components that come in contact with pumped fluid are chemically inert materials like PTFE, GFT and pure Ceramic. The heart of the seal is the flexible PTFE Below made from virgin grade Teflon. Springs and other metal parts are in Haste alloy-C, Alloy-20 etc. The rotary face is of glass filled Teflon. The Stationery face is pureceramic. These seals are always installed externally.

• Material: Rubber (Seal)
• Country of Origin: Made in India
• Seal Body: Stainless Steel
• Diameter: 12 mm to 100 mm
• Usage/Application: Industrial Pump, Vaccum Pump
• Secondary Seal: Nitrile/ EPDM/ Silicone/ Viton
• Series: Jhone Crane 2100
• Packaging Details: Box

• Type: Rubber Bellow Seal
• Material: Neoprene Rubber, Nitrile Rubber, Rubber, Silicone Rubber
• Shape: Round
• Thickness: 10-20mm, 20-30mm, 30-40mm, 40-50mm
• Condition: New, Used
• Size: 10inch, 2inch, 4inch, 6inch, 8inch
• Application: Connecting Joints, Pipes, Tubes
• Feature: Easy To Install, Fine Finish, Good Quality, Heat Resistant, Unbreakable

The Seal Type 21 is a Compact Single Spring Rubber Bellow Mechanical Seals for universal general purpose for Water / Water Based Solution like Oils, Fuels and Other Fluids and even with some Content with Abrasive and for a very wide operating condition designed for Centrifugal Pump. Rotary Equipment and Industrial applications (Food Processing, Water System, Waste Water Treatment for Petrochemical Processing, Pulp and Paper) Features Single, low cost and mass produced Mechanical Seal with Rubber Bellow. Central Point Non-Clogging Coil Spring Seal. Spring Design Seal is suitable for duel-direction of Shaft Rotation. Bellow Design Seals for Pressure supported and eliminates folds. Bellow Seals Protecting against Twisting. Unitize, easy-to-fit design seals Materials Seal Ring Faces : Cabon, SiC and TC Seat Faces : NiR, Ceramic, SiC and TC Elastomer : Viton, Neoprene, EPDM, NBR and Buna-N MOC : SS 304 / SS 316 Operating Capabilities Shaft Dia. : 10mm to 100 mm Pressure : Up to 8 bar Temperature : -20oC to 180oC Speed: 3000 r.p.m.   Rubber Bellow Seals have been carefully designed and manufactured with great precision and care. Please Visit us to see our full range of Rubber Bellowl Seals to meet all your requirements. We are the manufacturer of Rubber Bellow Mechanical Seal in Mumbai INDIA.

• OPERATING LIMITS:: Shaft Diameter 'd'
• 15mm to 150mm: Pressure 'p'
• Upto 20 bar: Temperature 't'
• -20 to +150 ºC(max): Shaft speed 'n'

The rubber bellow mechanical seal has been designed for general sealing purpose which includes easy installation of the seal. The Seal has a unique rubber bellow secondary seal, which provides a high degree of axial flexibility to compensate for lack of concentricity of the shaft & misalignment & wear due to thrust movement of the shaft. The seal can be use regardless of direction of rotation since the driving torque is not transmitted through the coil spring, The required driving torque is enhanced through the unique rubber bellow which fits on the shaft through the interference fit between the collar, rubber bellow & the shaft.