Sawing Machines Dealers in Mumbai

≤315mm (weight 1,000 kg); 380 volt 3 phase 50 Hz (2.25 kW)≤630mm (weight 1,900 kg); 380 volt 3 phase 50 Hz (3.7 kW)≤800mm (weight 2,300 kg); 380 volt 3 phase 50 Hz (3.7 kW)≤1200mm (weight 6,000 kg); 380 volt 3 phase 50 Hz (6.25 kW)≤1600mm (weight 7,000 kg); 380 volt 3 phase 50 Hz (9 kW)67 degree maximum cutting angle allows production of segments for bends, tees and Y-branch teesAngular cutting error equal to or less than 1 degreeSpeed of saw blade 250 m/min

The diamond Segmented Gang Saw Blades that We Manufacture are Used for Slabbing Marble, Sandstone, Limestone, Etc. the Blanks are Fabricated Made from 2% Nickel Alloy Steel. Furthermore, the Diamond Segmented Gang Saw Blades are Manufactured By Heat Treatment, Skilful Straightening & Tensioning with the Use if Advanced Technologies. acclaimed for : high Productivityexcellent Parallel and Straight Cutsconsistent Performanceperfect Sawn Finishlonger Service Life available in : sizes :gang Saws -180 Mm Width X 2.5 / 3.0 / 3.5mm Thickness X Desired Lengthsegments :20 Mm Length X 3.5 / 4.0 / 4.5 / 5.0 Mm Width X 10 Mm Heightbox Typeconical Shaped

Best quality Indian Make Ribsaw machine complete with electric motor 2HP 3 phase, 2800 RPM 12" circular saw with saw guard motor pulley, V belt push button starter having the following specification.  

Welding Process: - The Saw Blades or Wire Ends to be joined should be cut straight, exactly at right angles and free from burrs on special shearing attachment (optional equipment) - Welding Current, Upsetting Pressure and Upsetting Way are set according to the blade width - The blade ends are rigidly clamped in special quick acting clamps provided on the machine - By depressing the welding lever, the welding process begins - The two ends are heated to forging temperatures in a few seconds and are then automatically forged (upset). The welding current switches off automatically - The job is de-clamped and the weld completed Process for Annealing: The upsetting way switch lever is now turned to annealing and the job is clamped again with the extended jaw distance which comes in automatically on flipping the lever to annealing position. - By pressing the annealing switch on which two heat positions are provided, the job is annealed in order to normalize the brittleness of the welded area. - Depending on the type of material, the annealing process should be repeated several times if need be. Shearing Attachment (optional): Special shears with arrangement for mounting on the front of the machine are available Grinding Attachment (optional): Grinding attachment mounted on top of the machine is necessary for removing the welding flash

Horizontal Metal Cutting Bandsaw Machine is supplied complete with standard accessories including suitable 440 volts, 3 phase AC electric motor, motorised coolant pump with fittings, V belt & vice. Silent Features:  Horizontal Metal Cutting Bandsaw machine are designed for  smoother cutting action. Uses worm gear drive. Makes optimum use of cutting blade with provision to change the effective pressure on blade using simple handle. Machine is designed for simple as well as swing cutting action of bow as desired. Machine is available for cutting maximum round bars of 175 mm diameter as well as 300 mm diameter. 

Horizontal Metal Cutting Bandsaw Machine is supplied complete with standard accessories including suitable 440 volts, 3 phase AC electric motor, motorised coolant pump with fittings, V belt & vice. Silent Features:  Horizontal Metal Cutting Bandsaw machine are designed for  smoother cutting action. Uses worm gear drive. Makes optimum use of cutting blade with provision to change the effective pressure on blade using simple handle. Machine is designed for simple as well as swing cutting action of bow as desired. Machine is available for cutting maximum round bars of 175 mm diameter as well as 300 mm diameter.