Thickness Gauges Dealers in Mumbai

We offer Single Ended Snap Gauges manufactured by using advance technology to our clients. These snap gauges are made from high density carbon steel and brass raw material. It is highly effective under high pressure performance and long lasting. These are made upto 100 mm as per IS 8023:1976 with thickness 6 mm to 30 mm. These Snap Gauges can be customized and are offered at affordable rates to our esteemed clientele. 

We are offering ultrasonic thickness gauge. The sw serious ultrasonic thickness gauge can be used to measure the thickness of the materials and spare parts of steel, aluminum, copper, zinc , quartz, glass, polyester, pvc , grey cast iron, nodular cast iron with high accuracy. When measuring the block, it can start the quick measurement only after its sensor is coupled on the inspected block. product specification: model sw6 measurement range 0.65~400mm material velocity range 509~18699m/s measuring accuracy â±(0.5%h+0.05)mm display accuracy 0.01mm/0.001inch scanning rate 2~20 times/sec frequency bandwidths 1ï½�10mhz measuring lower limit of pipes î¦15mmã�1.0mm (probe: 5mhz, î¦10mm) î¦10mmã�1.2mm (probe: 7.5mhz, î¦6mm) display mode 128ã�64 matrix led power supply 2 aa alkaline batteries operating time 280 hours typical battery life, 100 hours continuous with backlight on operating temperature range -10â��ï½�50â��(ambient environment) -10â��ï½�300â��(high temperature mode) usb / gauge size 136 mmã�72 mmã�20mm weight 176gï¼�including batteriesï¼�

Stech engineers manufacturing various types of thickness gauge to check the thickness of rubber, paper, fabric, card board, films etc. As per is 3400 ( part I ) 1977 in various range, throat and accuracy.

Ultrasonic Thickness measurement is non destructive method of measurement and particularly, suitable for components having access only from one side, where conventional gauge cannot be used.

KM-117 is a portable easy to use 3½ digit, compact-sized digital coating thickness gauge sighting designed for simple one hand operation. Meter comes with Backlit LCD display, Auto-Hold function and Auto Power Off (15 seconds approx.) after releasing trigger to extend battery life.

Micronstat is an electronic digital gauge for accurate measurement of coating thickness. It can measure thickness as fine as 1 micron, eliminating the need for guess work, erroneous reading and approximation in coating thickness measurement. Micronstat can help to maintain consistent quality of coatings in the fields of anti-corrosion, electroplating, painting of engineering products, automobiles, aircraft manufacture, and chemical industry and so on. Micronstat measures following coatings on metallic substrates: Paint, varnish, lacquer, oxide, nitrite phosphate, enamel, plastic, fibre glass, rubber glass etc. Decorative and protective coatings Electroplating on steel (except nickel) Anodizing, paints etc. on Aluminium Plastic, Polyester films, Copper, Aluminium, foil thickness measurement by providing a temporary base like a plate or a roller

We are offering ultrasonic thickness gauge. Capable of performing measurements on a wide range of material, including metals, plastic, ceramics, composites, epoxies, glass and other ultrasonic wave well-conductive materials. Transducer models are available for special application, including for coarse grain material and high temperature applications. Two-point calibration function. Two work modes: single point mode and scan mode. Coupling status indicator showing the coupling status. Optional software to process the memory data on the pc. Optional thermal mini-printer to print the measured data via rs232 port.

The “AMGT-2” is a portable feeler gauge. It is used to measure the thickness of non-magnetic materials, such as plastic, glass, ceramic, aluminium, copper etc…The accuracy of the measurements is not affected by the shape of the sample.It’s designed by basing on the method of the Hall Effect. Simple and rapid as below: Place the steel ball on the side of the sample and the probe on the opposite side. Move the sample and let the probe to be the tested position. The steel ball will be drawn by the probe automatically. The Hall Effect sensor on the probe measure the distance between probe tip and the steel ball. Non-destructive measure High resolution 7* touching screen Dynamic display: measuring value/ graph/ date/ hour/ battery Full aluminium frame Fast and accurate measurement of the thickness Achieving accurate thickness measurement in corners, small radius and some irregular shape Display real-time measurement value Max and Min Mode: Automatic capture of the maximum or minimum value Value difference function: Display the value difference between preset value and actual measured value “CYCLE” function: Record the Max, Min, Average value & Graph during the predefined time.”Delayed start and Auto-stop” function frees the hands of operator and it’s convenient for large-size sample measuring. Alarm function: Programmable, warns the high or low preset value by sound or visual indication Password function enables the safety of the calibration data and measuring data Can store 9999 measuring data