Coating Thickness Gauge Dealers in Mumbai

Coatmeter A)For Non-Magnetic Coatings On Magnetic Base : 1) Digital Meter For Coatings On MS2) Coatmeasure- M2s , Range: 2000 Microns 3) Coatmeasure - M6s, Range : 6MM 4)Coatmeasure - M12s , Range : 12MM Digital Coating Thickness Gauge –B) For Non-Conductive Coatings On Conductive Base Digital Meter For Anodising and Coatings On AI & Brass :1) Coatmeasure-C2s , Range : 2000 Microns, {0 To 20 (0.1) & 20 To 2,000 (1) Micron}2) Coatmeasure-C4s, Range : 4000 Microns C) For both Ferrous & Non-Ferrous bases : Coatmeasure - ( M & C )2s, Range : 0-2000 Microns   COATMETER : Dial Type Fixed Probe Gauge Spot Calibrationon nearest Testfoil for better accuracy Range : a) 100,200,300,600 Micron ( Any One ) b) 1, 3, 6, 0.5-9 MM ( Any One )   Coating Thickness Gauge - COATGAUGE : Pen Type Pull-Off Gauge, Also reads in Thou and on equally divided scale,0-600 Microns   Coatest AA Make Made In India Pull-Off Type (For Vertical Use Only) 0 To 250 Micron Or 50 To 800 Micron (Any) 1815 Picture code   Thickness Gauge (Throat Depth 40 mm) a) Dial Type Resolution : 0.01 - Range : 0-10 mm, Resolution : 0.01 - Range : 0-25 mm, Resolution : 0.001 - Range : 0-1 mmb) Digimatic (Digital Type) Acc : 0.01 - Range : 0-12 mm, Acc : 0.01 - Range : 0-25 mm, Acc : 0.001 - Range : 0-1 mm   Digital Coating Thickness Meter, Model : CM-8821 (Micro Computer Based)Range : 0 to 2,000um ( F Type= Non Magnetic Coatong on Magnetic Material )For Measuring The Thickness Of Any Non Magnetic Material (Paint Plastic Porcelain Enamel Copper Zinc Aluminium Chrome Etc) On Magnetic Bases (Iron Nickel Etc) Like Plating Layer Lacqure Layer Porcelain Enamel Layer Phosphide layer Copper Aluminium & Paper   Model CM - 8823,( NF Type = Non Magnetic Coating On Mon Magnetic Material ) Range: 0-1000 Microns/0-40mil   Model CM-8825 Fnf (Micro Computer Based) Ferrous & Non Ferrous Combined ( 2 in 1, F & NF type )Range : 0 To 200um/500um/1000um/2000um Data Output Rs-232 Interface   Model TM-8810 (Micro Computer Based)Range : 0 to 200um Thickness Meter, Microcomputer based, Ultrasonic,For Measuring The Thickness Of Steel Cast Iorn Aluminium Red Copper Brass Zinc Quartz Glass Polyethylene Pvc Gray Cast Iron   Model TM - 8811 , Same as above but with sound velocity 2000-8000 m/s Model : TM - 8812 (micro Computer Based) Range : 1.2 to 225 mm / 0.05 to 9 inch RS-232 Interface, with sound Velocity : 2000 - 8000 m/s   SHORE A HARDNESS TESTERa) Indian b) Japan   DIGITAL SHORE A HARDNESS TESTER, Model No.6510 A, 4 Digit-10mm LCD Display, ImportedRange : 10~90H, Resolution : 0.1, Test Specimen Min 6 mm Thick, Auto Off, Power Supply : 4 x 1.5V AA (UM-3) BatteryTo Measure the Hardness of : Rubber, Elastomers, Silicon Substances, Soft Plastic, Felt, Leather   DIGITAL SHORE D HARDNESS TESTER, Model No.6510 D, 4 Digit-10mm LCD Display, ImportedRange : 10~90H, Resolution : 0.1, Test Specimen Min 3 mm Thick, Auto Off, Power Supply : 4 x 1.5V AA (UM-3) BatteryTo Measure the Hardness of : Plastics, Formica, Plexiglass, etc   SHORE D HARDNESS TESTER INDIAN   Surface Roughness Tester, Model No.SRT-6210,. 4 Digit-10mm LCD Display, with blue / Black Light ImportedSensor : Inducutance Type, Radus of Probe Pin : 5, Material of Probe Pin : DiamondParameters : Ra, Rq, Rz, Rt. Measuring Range : Ra, Rq : 0.005 ~ 16.00um / 0.020 ~ 629.9uinch,Rz, Rt : 0.020 ~ 160.0um / 0.078 ~ 6299uinch   Digital VACCUM GAUGE, Range : 25-0 Microns Model TPI-605   Digital VACCUM GAUGE, Range : 25-0 Microns Model TPI-606   Digital Electronic Thickness Guage Mitu-Toyo Japan Model : 700-110sue Range : 0-12mm/0.01mm, 700-122sue Range : 0-25mm/0.01mm   Wet Film Thickness Gauge (upto 0.004") Circular Type   Dry Film Thickness Gauge (Dial Indicator Type)

KM-117 is a portable easy to use 3½ digit, compact-sized digital coating thickness gauge sighting designed for simple one hand operation. Meter comes with Backlit LCD display, Auto-Hold function and Auto Power Off (15 seconds approx.) after releasing trigger to extend battery life.

Micronstat is an electronic digital gauge for accurate measurement of coating thickness. It can measure thickness as fine as 1 micron, eliminating the need for guess work, erroneous reading and approximation in coating thickness measurement. Micronstat can help to maintain consistent quality of coatings in the fields of anti-corrosion, electroplating, painting of engineering products, automobiles, aircraft manufacture, and chemical industry and so on. Micronstat measures following coatings on metallic substrates: Paint, varnish, lacquer, oxide, nitrite phosphate, enamel, plastic, fibre glass, rubber glass etc. Decorative and protective coatings Electroplating on steel (except nickel) Anodizing, paints etc. on Aluminium Plastic, Polyester films, Copper, Aluminium, foil thickness measurement by providing a temporary base like a plate or a roller

We are strategically based in Maharashtra(India) and are in proximity with the resources required for easy production process. All those who are looking for a responsible name supplying Coating Thickness Gauge can get in touch with us!

Non-magnetic coatings, e.g. phosphate, paint, plastic on steel, Non-wearing permanent magnet, Measuring without power supply, No calibration required, Measurement of coatings up to 20 mm, High accuracy.

We offer our clients coating thickness gauge for Ferrus & non metals only, which are in compliance with the industry standards. These gauges are majorly used in furniture making as these are efficient in holding two wooden parts strongly together. Further, our gauge can be availed in bulk quantities as we maintain huge stocks. For our clients, we can deliver quality products within the shortest span of time. APPLICATION: Used for Measuring Thickness of Non Magnetic Materials (Paint, Plastic, Porcelain Enamel, Copper, Zinc, Aluminium, Chrome etc.) on Magnetic Material (Iron, Nickle ) SPECIFICATION: Display: 4 Digit Display (10mm LCD) Measuring Range: 0-1000um (0-40mil) Accuracy: ±1-3%n or ±2.5um(Whichever is Greater) Resolution: 1µm(0-99.9µm), 1µm(over100µm) Operating Principle: Magnetic Induction (F) Measuring Area: 10.7mm Operating Temperature & Humidity: 0°C to 50°C,≤80%RH Calibration: Self Calibration Auto Power Off Battery Indicator: Low Battery Indication Power Supply: 4×1.5V AA Size Battery Buttons: 5 Buttons Display Size: 41×23mm Weight: 260gm including batteries Dimension: 161x69x32 mm (6.3×2.7×1.2 inch) Accessories: Operational Manual, Probe, Calibration Foil, Carrying case, Substrate block.

Measuring range: 1 to 6000μm UCT100FLNL Coating Thickness using the thickness measurement method of magnetic induction, is an ultra-compact measuring instrument can be a non-destructive. measurement of the magnetic metal substrates (such as iron, steel, alloys and hard magnetic properties of steel, etc.) on a non-magnetic thickness of the overburden (such as aluminum, chromium, copper, zinc, tin, enamel, rubber, plastics, paints, etc.) can be used in the field of manufacturing, metal processing industry, chemical industry, commodity inspection and other testing. The small size of the instrument, the probe and instrument integration, especially suitable for measuring the project site; The instrument is rugged, versatile, one-hand operation. UCT100FLNL coating thickness gauge designed portable and durable, so in normal use under harsh conditions. The UCT100FLNL has a key operation function without calibration, do not reset the next measurement can be carried out without the need for operator training to operate. UCT100FLNL thickness gauge function: Zero calibration and span calibration. Ruby wear probe. The basic calibration of the probe. With automatic shutdown. Operation beep prompt. Under voltage indicator. The error function. UCT100FLNL thickness gauge indicators: * Measuring principle: magnetic induction method or Eddy current method * Measuring range: 1 to 6000μm * Measurement accuracy: ± [(1 ~ 3) H +1] μm (full scale calibration)

Digital Coating Thickness Gauge, Dial Comparator, Electronic Micromete

Non Magnetic Coating on magnetic base Base : Magnetic Stainless Steel (M.S.)