TOBIT ENGINEERS Andheri East, Mumbai, Maharashtra

A range of neck seals, neck warmers, Quick Neck systems, helmet yokes and neck ring systems for attaching to the VIKING™ drysuit range.

The microprocessor-based, infrared Ultima XIR gas detector is precisely engineered to continuously monitor for combustible gases and vapors. The unit features DuraSource Technology, which offers improved IR life, and a HART port for easy output access. The explosion-proof stainless steel monitor works indoors or outdoors and features infrared technology that eliminates the need for frequent calibrations. Its operations are based on dual-wavelength, heated-optics technology, which compensates for temperature, humidity and aging effects. The unit uses only one circuit board for increased reliability, and the sensor life isn't reduced by exposure to gas. The LCD screen provides scrolling information, while optional quick-check LEDs provide increased visibility.   Stainless steel indoor/outdoor monitor features infrared technology Explosion-proof unit also boasts HART, which improves information and provides convenient set-up, calibration and diagnostics Operations compensate for temperature, humidity and aging effects MSA's patented sensor design allows sensor replacement without declassifying the hazardous area Scrolling LCD screen provides constant flow of information Zero adjustment provides full calibration Optional Carbon Dioxide detection

Designed to provide thorough, continuous monitoring of many hazardous gases, the indoor/outdoor Ultima X Series Gas Monitors offer excellent performance and MSA quality craftsmanship. DuraSource™ Technology offers extended sensor life, while HART provides convenient setup, calibration and diagnostics. HART also allows for existing component install and wiring to be used. A single circuit board increases reliability, while our patented sensor disconnect-underpower feature allows all sensors to be replaced in hazardous areas without area declassification. The units are crafted from either stainless steel or polycarbonate, and the interchangeable smart sensors eliminate the need for reconfiguration. Our scrolling LCD screen display sensor reading and gas type, while the calibration process includes date stamping and the ability to calibrate locally or remotely.   Indoor/outdoor monitors feature HART, which provides more information and features convenient set-up, calibration and diagnostics Interchangeable smart sensors eliminate need for reconfiguration MSA's patented sensor design allows sensor replacement without declassifying the hazardous area DuraSource Technology extends sensor life Automatic calibration adjustments and date stamping Stainless steel and polycarbonate models available

Everything you need for attaching to the sleeve of a drysuit including wrist seals, glove ring systems and latex and rubber gloves and mittens.

Wind Indicator Wind Sock Type manufacturers,Wind Indicator Wind Sock Type suppliers,in Mumbai,India.   Features:- • Consisting of wind Soak Holding Ring, Support cage, Mounting stand. • For use of many industries like Refinery, Sugar Mills, Fertilizers, Textile, Fibre, Paint, Pharmaceuticals, Foundries, Steel Plants, Chemicals, Petrochemicals, Papermills, Pesticides, etc. • Stand painted black inch dia flag post painted white. • Wind Sock Polyster Tough Cloth Double Layered, stitched with Polyster Twisted Yarn. • Support Cage inside the sock is available 5 ft. long for 8 ft. soak at extra cost. • Support Cage for 6 ft. sock is also available at extra cost. We are one of the reputed manufacturers and suppliers of industrial safety products. We are busy manufacturing products like Wind Indicator Wind Sock Type, Emergency Safety Body Shower Walk On Type, Emergency Body Shower Hand Operated, Eyewash Fountain Drench Shower Combination unit, Eyewash Pedestal unit, etc. Our Wind Indicator Wind Sock Type is highly used in industries such as sugar mills, fertilizers, petrochemical, steel plants, paper mills, pesticides, etc. This Wind Indicator Wind Sock Type consists of a wind soak holding ring, support cage and a mounting stand. It is fabricated to international standard of quality.

MSA offers several web straps and slings for use in a variety of applications.   Anchorage Chocker Sling provides a durable point for lanyards or lifelines Suretyman Anchorage Sling is sewn into an endless loop that can be hitched to an anchorage point using various configurations Thermatek Anchorage Connector Strap is heat and burn resistant and couples a single personal fall arrest system to an anchorage Anchorage Connector Strap provides a temporary means of connecting to an anchor point Boom Belt is used to prevent catapult accidents Double D-ring Anchorage Connector Strap is used as a removable anchor strap for connection to an anchorage point PointGuard Concrete Anchorage Connector Strap couples a single personal fall arrest system to an anchorage PointGuard Residential Anchorage Connector Strap provides a secure point of attachment for residential construction applications Check availability in your country

MSA Chillgard VRF Refrigerant Leak Detector is the first industry detector for Variable Refrigerant Flow Systems (VRF) with integrated BACnet capability. Therefore, it can be directly connected with any Building Management Systems (BMS). MSA applies its proven Photoacoustic infrared sensing technology that provides a stable zero baseline, minimizes cross-sensitivities and offers low cost of ownership through minimum maintenance required.   Low-level detection at 25 ppm minimum detection Versatility—capable of operating within wide temperature and humidity ranges Low maintenance—no moving parts and stable PAIR sensor technology Easy installation—simply secure back plate to wall 20-year proven photoacoustic infrared sensing technology Digital communications BACnet® Modbus

Bullard visors conform to ANSI/ISEA Z87.1 standard for eye and face protection when used in combination with Bullard headgear or faceshield brackets. Visors are available in flat or heat-formed acetate, clear flat or heat-formed polycarbonate, Shade 3 and 5 flat polycarbonate, flat or heat-formed Tritan™, flat polyester and wire mesh screens.

VIKING™ has a wide range of products which add value to the drysuit range, and are worn with pride by many VIKING™ drysuit divers around the world. Jackets, polo shirts, T-shirts and pullovers Baseball and fleece hats Lapel pins and key rings VIKING™ watches, mens and ladies DVD and manuals

VIKING™ has a wide range of products which add value to the drysuit range, and are worn with pride by many VIKING™ drysuit divers around the world. Jackets, polo shirts, T-shirts and pullovers Baseball and fleece hats Lapel pins and key rings VIKING™ watches, mens and ladies DVD and manuals

VIKING™ offers a range of valves from both Si-Tech and Apeks according to your preference. Non magnetic versions availlable for military use.

With premium stainless steel components and innovative engineering, the V-TEC Self Retracting Lifeline incorporates a precision-made spring radial energy absorber that requires zero calibration or adjustment. The retraction dampening feature controls cable retraction speeds preventing pre-mature and accidental load indicator deployment.   Completely field-serviceable with minimal components Spring radial energy absorbing technology requires zero calibration or adjustment Retraction dampening features controls the cable speed to

The FlameGard 5 UV/IR E detects fires by monitoring in both the ultraviolet and infrared (UV & IR) spectral ranges making it highly immune to false alarms caused by lightning, arc welding, hot objects and other sources of radiation. The detector’s electronics are integral within an explosionproof housing, allowing detector information to be processed at the point of detection. The electronics are fully separated from the EEx e wire compartment, offering protection during installation and service.   Wide field of view enables greater coverage for detecting fires utilising fewer detectors LED status indication provides clear visibility from front Continuous Optical Path Monitoring (COPM) checks optical path integrity and detector’s electronic circuitry once every minute Stainless steel construction enables high level of corrosion resistance for Marine environments EEx e wiring compartment eases field wiring connection Five output configurations provide flexibility of choice and economy of purchase

Fiberglass construction. Choose traditional style in an affordable, easy to maintain design. Also available with a matte finish.

Lightweight, streamlined and engineered for extreme search and rescue operations. Certified to NFPA 1971-2013 and NFPA 1951-2013.

  Safe & effective method for locking out Miniature Circuit Breakers. The lockout can easily be installed with the aid of a screw driver. It can be used on single & multi - pole breakers. A Padlock on UCBL should be applied to Lockout the MCB.

The VIKING™ range of underwear has changed recently with the addition of new thinner materials which offer as much insulation as traditional thicker underwear.

VIKING™ produces a range of waterproof bags mainly for military use, and made from HF welded PU materials for durability.

Engineered to provide cost-efficient gas detection, the Ultima XL/XT Series Gas Monitors are simply an outstanding choice. The units boast a hand-held HART port running over 4-20mA output provides convenient setup, calibration and diagnostics. The interchangeable smart sensors eliminate the need for reconfiguration, while local calibration employs LEDS and push-buttons. Indoors or outdoors, some of these explosion-proof models feature infrared technology that eliminates the need for frequent calibrations. Some units operations are based on dual-wavelength, heated-optics technology, which compensates for temperature, humidity and aging effects. The monitors use only one circuit board for increased reliability, and they're easy to install with two-piece field-wiring connectors.   Indoor/outdoor monitors feature HART, which improves information and provides convenient set-up, calibration and diagnostics Interchangeable smart sensors eliminate need for reconfiguration MSA's patented sensor design allows sensor replacement without declassifying the hazardous area Automatic calibration adjustments and date stamping Stainless steel and polycarbonate models available

Built for safety programs that demand gas concentration measurement before allowing entrance to an area, the Ultima X Sampling Module is exclusively designed to work with the Ultima X Gas Monitor. The unit features an explosion-proof design and reliably extracts a sample from any confined or inaccessible area—or any area that is too hot, cold, or otherwise harsh—and delivers gas concentration reading directly to the installed gas monitor.   Explosion-proof sampling module works exclusively with Ultima X Gas Monitor Available in pumped or aspirated versions

Get continuous monitoring of methane, propane, and other combustible gases with this open path infrared detector. Provides 4-20 mA analog signals, as well as digital display and relay contacts. Digital display and adjustable mounting arms ensure easy alignment. Factory calibrated for low-maintenance operation.   Monitors and detects methane, propane, and other combustible gases Dual detection for both small and large leaks Single detection beam eliminates drift and false alarms Transmits sensor data and status information up to 9,000 feet/2700 m Multiple communication outputs for complete status and control capabilities

Protect personnel from exposure to hydrogen sulfide (H2S) with this microprocessor-based transmitter. Virtually self-calibrating and self-diagnosing, this device senses hazardous gas leaks, signifying alarm or warning conditions via a digital display. Analog signal and relays provide remote and/or discrete indications.   Detects H2S gas leaks at sensor site RFI resistant for more reliable operation Uses existing 4-20 mA wiring to reduce installation costs Stores up to 10 event warnings and 10 alarms, calibrations, checks and faults Designed for use with MSA’s Metal Oxide Semiconductor (MOS) sensor

The Ultima Controller is purpose-designed and built to provide complete access to all advanced features of the Ultima and Ultima X Gas Monitors, as well as the Toxgard II Gas Monitor. Via its full-function and password-protected keypad, users can set the real time clock, set alarm levels, change span-gas values, display date of last calibration, display minimum, maximum and average gas values, change address and set future calibration time/date in addition to providing basic calibration functions   IR technology communicates with supported gas monitors Password-protected unit ensures safety and security

The Ultima Calibrator offers the industry's simplest, quickest calibration. Simple, three-button device is purpose-built for calibrating and changing the address of Ultima and Ultima X Gas Monitors and the Toxgard II Gas Monitor.   IR technology communicates with supported gas monitors User can calibrate and change address via simple, three-button device