Calibrators Dealers in Mumbai

Process signal measurement and simulation for easy control loop calibration and measurement tasks - from handheld field instruments to laboratory reference level bench top instruments.   Process signal measurement and simulation Easy control loop calibration and measurement task Handheld field instruments Laboratory reference level instruments

The Ultima Calibrator offers the industry's simplest, quickest calibration. Simple, three-button device is purpose-built for calibrating and changing the address of Ultima and Ultima X Gas Monitors and the Toxgard II Gas Monitor.   IR technology communicates with supported gas monitors User can calibrate and change address via simple, three-button device

The 5700A and 5720A Multifunction Calibrators are five-function calibrators designed to address the most demanding electrical calibration workload. They source direct and alternating voltage and current and resistance. A wideband voltage option extends overall ac bandwidth to 10 Hz to 30 MHz to cover to RF voltmeters. Both are compatible with the 5725A Boost Amplifier, the 52120 Transconductance Amplifier, and 5205A5215A amplifiers (now obsolete). All can be automated with METCAL Plus calibration software.Specifications for both the 5700A and 5720A Multifunction Calibrators are stated with a choice of confidence levels. Now, you can use the conservative 99% specifications that Fluke traditionally publishes, or more aggressive 95% specifications recommended in many international procedures.

The orifice assembly or the flow control element, valve, is calibrated under fluid mechanics standards of ISO 5167 and IEC 60534 standards. The process and the procedure of the measuring flow calibration of the device and the design is as per the international standards applicable for volumetric and gravimetric conditions. The flow calibration bench for upto 12” size, is applicable for pressure 2 rating upto 3 kg cm g and for all ambient conditions. The testing media is water. The calibration unit is under free length or straight length as per the ISO standards for mounting in such conditions applicable for orifice assemblies with water as media and with calculated beta value to decide the free length for calibration of sensors. For valves, the condition is kept at ambient conditions with water and based on IEC 60534 standard the flow coefficient value of the valve is matched with desired flow rate applicable under differential pressure conditions, under applicable and available free or straight lengths. The bench gets the water from an underground tank with an overall capacity of m3 which is having a magnetic level gauge mounted to check the level of water. The level in turn helps to clear the pressure applicable under the centrifugal pump which is mounted to the side to generate the desired and the requisite pressure for the flow assembly, either valve or orifice.

Key Features:   Long Life, Minimum Maintanence Fast Pressure Generation Minimum Force Required for Pressure Generation Available in Many Ranges upto 1000 bar Vaccum Testers also available Portable Version of AH1-150 and AH1-400 for Site calibration Available with Digital/Analog Master Gauges upto 0.05% Accuracy High Volume Capacity for Testing 6"/10" gauges Best for Lab Use Most Parts made from Stainless Steel   When you are looking for Inhouse Pressure Calibration of Pressure Instruments ADARSH AH1/AH2 series Models are the ideal tool. They offer fast pressure generation and are ideal for operating for many years. These Bench Pressure Calibrator are suitable  for Calibration and Testing of pressure gauges,  pressure transmitters, pressure switches, valves.  Different Models are available for Vacuum and Pressure upto 1000 kg/cm2 max. Models AH1-150 and AH1-400 can be customized to be offered in portable versions for on-site calibration. These comparison testers are hydraulic based and can be used with oil (preferred) or water.  

Libratherm offers 4 and ½ digit mV Calibrator, which is suitable for simulation and measurement of thermocouple signals. It can be used to calibrate or cross check the calibration of temperature instruments. Some model also soureces (4-20)mA current for calibrating temperature and other process transmitters. Even transmitter output can also be measured accurately using the built in loop supply of 24VDC. For calibrating RTD based instruments a separate fixed and variable value resistance source is available.Applications :Measures temperatures in conjunction with a thermocouple.Calibration and testing of indicators and recorders Suitable for many routine field servicing and in house test/measuring unit to calibrate temperature indicator / controller.Mini Volt Calibrator MODEL : LC-02 RANGE : 0.00 � 199.99 mV. & 0 � 1999 mV ±1%FSD.POWER SUPPLY : Mains 240 VAC or 110 VAC Operated only MODES : Sink & Source OUTPUT : ADJ. Using Coarse and Fine PotentiometerRANGE SELECTION : Using Push SwitchWEIGHT : 2.0 kg ApproxResistor Calibrator for RTD Source onlyMODEL LC - 02OUTPUT ADJ. : 12 Fixed Points { -50, -10, 0, 10, 50, 100, 150, 200, 250, 300 & 350 OHMS} and Variable between each Ranges using PotentiometerACCURACY : ± 0.1% SIZE : 96 X 96 X 120

Calibrating Energy meters at a time e.g. 5, 10, 20, 40, 60 or 80 resulting in speedy testing.   Features Single as well as three phase energy meters can be tested Can Calibrate 80 meters at a time Customized design of test jigs (electro-pneumatic fixtures) for ease and safety of operator Customized PC based software with secured database and report generation Micro Controller based error calculation module Sensors at each station Reference Meter for testing accuracy

Liquid Bath is an instrument commonly used in petroleum industry to determine the tendency of aviation fuels and gasoline to form gum in storage conditions. It is also used to measure the oxidation stability of fuels. Salient Features: The instrument is provided with constant temperature baths for heating oxidation pressure vessels. The instrument conforms to the specifications of American Standard of Testing Materials (ASTM). There are two types of models available for the instrument. There is a two-unit water analog-controlled water bath that can be installed on a table top if required. The instrument is equipped with an overflow standpipe or drain to maintain the proper depth when the pressure vessels are introduced. Provided with a brass plated reflux condenser to minimize evaporation loss. The equipment is supplied with a low liquid level controller. The instrument has double-wall insulated construction with support racks, stainless steel tanks, and port covers.

Generates stable humidity and temperature conditions Transportable calibration solution Humidity equilibrium typically in 3 minutes Calibrate up to fi ve RH probes simultaneously Integrated touch screen PC and USB hub External heated sample loop for reference hygrometer connection Easy-to-use graphical user interface

ADARSH PRESSURE CALIBRATORS ARE IDEAL FOR PRESSURE GAUGE CALIBRATION & TESTING. CHOOSE THE BEST PRESSURE CALIBRATORS AVAILABLE IN THE MARKET ALL WITH NEW DESIGN & FEATURES. OUR CONTINUOUS R&D HAS LED US WITH SO MANY OPTIONS TO CHOOSE FROM. ALL MODELS ARE AVAILABLE WITH ANALOG OR DIGITAL GAUGES.

  Digital Pressure Calibrator Hand held Microprocessor Based Model No : FITZER / DGM / 800 Portable Pressure Calibrator MM / inches W.G OR mm of Hg, Kg/Cm2, Psi, Bar, mBar, & Kpa Ranges are selectable Range : In between 100 mm of W.C to 20,000 mm of W.C Accuracy : +/- 1% Range

These rugged temperature calibrator, essentially comprises of a metal block, electrically heated and precisionely controlled, using microprocessor based PID controller. Optionally An additional digital temperature indicator & sensor duly calibrated & having traceable calibration certificate can also be provided for use as external reference for comparison purpose. Control stability is typically ±1Ë�C and is directly readable from display eliminating any guess work. However the calibration accuracy is only limited by the accuracy of the standard / reference sensor or thermometer used .     Features : - Temperature range up to 1000Ë�C - Fast, stable, accurate & maintenance free - High Immersion length enables calibration of analogue dial type thermometers - Auto tuned PID controller with 5 recipe memory - Heater high / low position selectors switch enables the use on low temperatures also

Display: 2 Line LCD module with backlights Unit: Programmable as required Selectable filter: Upto 8 Degree Input: Full bridge , 4 to 20mA, Voltage 0 to 1V , 0 to 10V Function: Mode, Zero, Unit , Maxmin, Peak etc Output 1: RS232 MOC: ABS PC Power Supply: 190VAC to 250VAC for SMPS adapter No. of Key : 5 No Firmware: Programmable as per requirement.

Universal calibrator for all instrument types--13 Thermocouples & 5 RTD types Ergonomic design and carrying case - easy to carry into the field Documenting capability -- eliminates inconsistency, automate process HART capability -- trim instruments while verifying calibration NIST Traceable -- guaranteed high accuracy