Smart Sensors & Transducers Limited Wadala, Mumbai, Maharashtra

The XMT*3000 digital temperature controller can replace traditional display meter. It adopts three - positions keys to set freely and single 4 digit LED display. It has 2-on off control , it is simple digital meter with control capability more reasonable . Technical Specification: Input: Thermal Couple K E J S Thermal Resistance: Pt 100 Cu50 Range: K (0 to 1300 deg C); E (0 to 800 deg C) S (0 to 1600 deg C); J (0 to 1000 deg C) Pt100 (-200.0 to 200.0; 0 to 600 deg C) Cu50(-150.0 to 150.0deg C) Display: 4 digit LED display OUT Indicator Light: When OUT is ON, a green LED light . Set key (SET): Switches the setting mode and registers the setting value and selected value . Dec Key : Decreases numeric value of the setting value . Basic Error: +- 0.5 % +- a dot of the total range of the input. Control Means: 2 - on off control Power AC 220 V (5060 Hz ) Work Environment: temperature 0 - 50 deg C, Humidity < 85 % RH, No corrode Size: XMTG 48x48x90 mm Hole 44x44

Rated Capacity : 30 , 50 , 60 , 80 , 100 , 200 , 300 Nm Non – linearity: 0.1-0.3% FS Hysterisis: 0.1-0.3% FS Output Sensitivity: 1.5-2.0 mV V Material: Alloy Steel Power Supply: 9-15 VDC Zero Balance: ≤ ±1 % Temperature Compensated: -10-40°C Operating: -20-65° C Input Resistance: 390(740) ±30 Output Resistance: 350(700) ±7 Insulation Resistance: ≥ 1000 MΏ Safe Load: 120 % FS Ultimate Load: 150% FS Features: High-grade alloy steel Highly accurate and reliable Suitable for torque measuring equipment , torque wrench and torsion measurement of shaft .

Technical Specification: Capacity: 20 , 50 , 100 , 200 , 300 , 500kg , 1t , 2t , 5t , 10t Non-linearity: 0.03% Hysterisis: 0.03 % Rated Output: 2mV MOC: Aluminum Alloy Steel Stainless Steel Features: These are compact and reliable. Based upon Bounded foil Strain Gauge. Fully sealed moisture proof. Used in Hanging And Crane Scale Hooper and tank weighing. Non- linearity, Hysterisis, Creep in terms of % of FSO.

Power 90 - 250 VAC, 47 - 63 Hz, 12VA, 5W maximum 11 - 26 VAC VDC, SELV, Limited Energy, 12VA, 5W maximum Signal Input Resolution: 18 bits Sampling Rate: 5 times second Maximum Rating: -2 VDC minimum, 12 VDC maximum( 1 minute for mA input )Temperature Effect: ±1.5 uV °C for all inputs except mA input ±3.0 uV °C for mA input Sensor Lead Resistance Effect: TC: 0.2uVohm 3-wire RTD: 2.6 °Cohm of resistance difference of two leads 2-wire RTD: 2.6 °Cohm of resistance sum of two leads Burn-out Current: 200nA Common Mode Rejection Ratio (CMRR): 120dB Normal Mode Rejection Ratio (NMRR ): 55dB Sensor Break Detection: Sensor open for TC, RTD and mV inputs, Sensor short for RTD input, below 1 mA for 4-20 mA input, below 0.25V for 1 - 5 V input, unavailable for other inputs. Sensor Break Responding Time: Within 4 seconds for TC, RTD and mV inputs 0.1 second for 4-20 mA and 1 - 5 V inputs

Robot Force Gauge Indicator Capacity: 10kN Least Count: 0.01 kN Display: 4 digit LCD display Unit: kg, kN, lb Input Signal: 0 to 10VDC Output Signal: Relay output NONC Indication: 3mm LED for Pass and Fail, power Filter: Fixed internal Function: Peak, Zero, Clear, Reset MOC: ABS Power Supply: 24V DC

SSNT has recently launched Push Pull Force Gauge. The Push Pull force gauge is a force measuring instrument for push & pull force. Due to gravity the meter when held inclined ( or reverse ) shows reading different than when held vertically. To remove gravity effect, turn zero adjust holding the gauge in measuring mode. Ranges in these gauges are 10kgf, 20kgf, 30kgf, 50kgf and 100kgf. Accuracy is +0.25%, 0.5 % and 1 % F.S. The Digital Push Pull Force Gauge can easily measure tension and compression forces and can display the measuring value in a moment with excellent response function. These gauges mounted on stand will create a high precision load tester for a range of applications. Special features include Handy structure, Programmable set points, Selectable three units, Peak force, Hold facility, Fast conversion display.

Smart Sensors And Transducers Limited have launched strain gauge based digital pressure transmitters (SSPX). The product design features include stainless steel design. These are manufactured in four series viz. Precision (P), General Purpose (GP) and Low Cost (LC) depending on accuracies of 0.25 %, 0.5%, 1% respectively. Because of their stainless steel construction (including wetted parts), these sensors are industrially rugged and highly reliable. These units measure a range of pressure from -1 kgcm2 to 1000 kgcm2. Pressure Transmitters are available in four different accuracies with temperature ranges from 0 to 80 deg C. The compact size makes them light weight and adaptable to be accumulated in locations where space restrictions pose problem.

Smart sensors and transducers limited have launched strain gauge based digital pressure transducer . The product design features include stainless steel design. These are manufactured in four series viz. precision (p), general purpose (gp) and low cost (lc) depending on accuracies of 0.25 %, 0.5%, 1% respectively. Because of their stainless steel construction (including wetted parts), these sensors are industrially rugged and highly reliable. These units measure a range of pressure from -1 kgcm2 to 1000 kgcm2. Pressure transducer are available in four different accuracies with temperature ranges from 0 to 80 deg c. The compact size makes them light weight and adaptable to be accumulated in locations where space restrictions pose problem. Being strain gage based, they are suitable for dynamic pressure monitoring, in addition to the conventional static pressure monitoring. The pressure transducer have wide application in process industries such as chemical and petrochemical, food, fertilizers, steel and cement plants, flow measurements, depth sensing and level measurements.

Display Digit: Two Line 6 Digit LCD display Accuracy: 0.1%, 0.25% Case Material: SS Wetted Parts: 17-4 PH stainless steel sensor Connections: Bottom Range: -1 to1000kgcm2 Battery: 9V PP3 Alkaline Battery SMPS Adapter Operating Temperature: 0°C to 40°C Storage Temperature: -10°C to 70°C Update rate: 100ms Alphanumeric LCD Display. Used for calibration purpose. Peak hold mode, maxmin, Zero reading. Engineering Units: 13 measuring unit Kgcm2, Psi, bar,mbar,Kpa,Mpa,mm-Hg,cm-Hg,in-Hg,mm-wc,cm-wc,in-wc,ft-wc . Backlight provided. Field Calibration: Zero and span Display Digit: Two Line LCD display module

Oxygen Analyzer Range: 0 to 25% Resolution: 0.01% Unit: % and PPM Display: 2 line LCD module with backlight Function: Max, Min, Hold Calibration: Single key calibration Power: 230VAC with inbuilt battery backup Enclosure: 192x96 DIN metallic Limit: 2 set point limit settable over full range.

Manual Force Gauge Capacity: 20kN Least Count: 0.01 kN Display: 4 digit LCD display Unit: kg, kN, lb Filter: Fixed internal Function: Peak, Zero, Clear MOC: Enclosure- ALU , Sensor- SS Power Supply: 9V PP3 Alkaline battery

Model: ADS-02 Capacity: 2 kg Accuracy: 1 Gm Platform Size: Convenient Detachable Bowl Battery Operated 9 VDC Auto Power Off Approved and stamped by Weights & Measures Dept. Application: Recipe Cooking Diet Control Checking Weight of Food Article

Range: 0 to 2.71J , 0 to 5.24J , 0 to 10.84J , 0 to 21.68J Hammer capacity: 2.71J to 21.6J Unit: J, Jm, Jcm, ft-lbf, in-lbf, m-kgf, Nm Display: 2 line LCD display Module with Backlight Output: Serial Rs232 Power: 230VAC 50Hz MOC: SS, MS Operating Temperature Range: 0 - 50 deg centigrade.

Industrial Platform Scale Bright Green Fluorescent Display Rugged Stainless Steel Platform Battery Back Up Help” Indication Approved by Weights & Measures Dept.

Quiet, air-cooled static-tyatic-type condenser. No fan required. Hermetically sealed and lubricated LG compressor. Protected against motor overload. Aluminum roll-body evaporator coated with epoxy finish. Water Guard System: In built air filtration” device protects water by preventing entry of insects and air borne particles. ”Constant Flow Probe” lets constant flow of water without glugging and turbulence. Electrical: Power Consumption: Very Low Heating power : 430 watts Refrigeration Power: 125 watts Power supply: Single phase AC-50 Hz

Hand Pump Technical Specification: Range: Approx. -1 to 25 Bar Resolution: 0.01 mBar using adjustable vent Operating Temperature: -20 to 50 deg C, humidity within 95%

Display: 2 Line LCD module with backlights Unit: Programmable as required Selectable filter: Upto 8 Degree Input: Full bridge , 4 to 20mA, Voltage upto 10V, Half bridge Function: Mode, Zero, Unit , Maxmin, Peak etc Output 1: RS232 Internal Power: 9V PP3 battery MOC: ABS PC Power Supply: 190VAC to 250VAC for SMPS adapter No. of Key : 5 No. Firmware: Programmable as per requirement.

Power: 230VAC+- 10%, 5060 Hz Clock system: Quartz oscillation system. Print method: Shuttle printer with automatic card insertion Memory: Lithium battery is installed, and good for three years of cumulative power failure. Dimension: 196(W) x 218(H) x 104(D)mm Operating conditions: -10 to +45 deg C 10% to 90% RH (non-condensing) Power consumption: Normally 3W, Maximum 15W Selection: Three Nos of INOUT selection with led indication

Double wall CRCA steel construction Microprocessor based locking system Secret code programming ( 2 – 8 digit code ) User code – Emergency Code (User authorized access) Simple keypad operation LED indication Power low indication Built in provision for shelf Floor Furniture attachment option Compact & rugged design Epoxy Powder Coating

Video: H.264 compression; Audio: ADPCM ☆ Overall operation of three functions – recording, playback, remote network monitoring can be operated simultaneously. ☆ Be applicable to event recording, schedule recording and manual recording. ☆ Be capable of playing back and searching according to time or event (alarm, movement and sensory alarm). ☆ Blinding alarm function, for preventing the lens from being deliberately shielded by someone ☆ Motion detection with adjustable detection area and sensitivity ☆ Powerful sensing alarm recording function, of which the toggle condition and recording channel linkage can be set ☆ Ethernet interface is provided for realizing remote monitoring, remote playback, acoustic monitoring, remote setting and remote software upgrading through network browser. ☆ Provide PTZ control interface, support PELCO-D and PELCO-P protocols ☆ Be applicable to user’s authority limitation, system lock and other safety guard functions. ☆ With 4pcs SONY Super HAD CCD cameras

Video: H.264 compression; Audio: ADPCM Overall operation of three functions – recording, playback, remote network monitoring can be operated simultaneously. Be applicable to event recording, schedule recording and manual recording. Be capable of playing back and searching according to time or event (alarm, movement and sensory alarm). Blinding alarm function, for preventing the lens from being deliberately shielded by someone Motion detection with adjustable detection area and sensitivity Powerful sensing alarm recording function, of which the toggle condition and recording channel linkage can be set Ethernet interface is provided for realizing remote monitoring, remote playback, acoustic monitoring, remote setting and remote software upgrading through network browser. Provide PTZ control interface, support PELCO-D and PELCO-P protocols Be applicable to user’s authority limitation, system lock and other safety guard functions. With 4pcs SONY Super HAD CCD cameras

Display: 2 Line LCD module with backlights Selectable unit: kg, lb & N programmable as required Selectable filter: Upto 8 Degree Input: Full bridge , 4 to 20mA, Voltage upto 10V, Half bridge Function: Mode, Zero, Unit , Maxmin, Peak etc Output 1: 2 NONC Relay Output Output 2: Rs232 MOC: ABS PC Power Supply: 190VAC to 250VA No. of Key : 4 No Enclosure: DIN96 x 96 Firmware: Programmable as required

SSNT offers ATCO Digital Torque Wrench as a high accuracy Torque Tool. Torque Wrenches are simple tools for tightening and loosening of bolts and nuts on assembly to a fixed torque value. We provide high quality electronic Digital Torque Wrench and at very economical prices.