Transmitter Device Dealers in Andheri East, Mumbai (14 products available)

The model IRD7111 is designed for continuous measurement of environmental noise in industrial and urban applications. It is suitable to meet Occupational Health Regulations that requires precise sound level monitoring. It continuously transmits signals to a Central Control Room givingwarning and alarm of excessive noise that could be a health hazard to personnel in the area. The IRD7111 is microprocessor based and programmable for a range of sound pressure levels. In addition to its 4-20mA output and relays, IRD7111 has a BNC socket for FFT analysis of the raw time wave form signal for identification of any specific sound frequencies that may be harmful. IRD7111 is part of IRD Mechanalysis Ltd’s comprehensive IRD7000 suite of proven site mounted machinery vibration and TSI transmitters The IRD7111 is designed to be mounted above process machinery offering a 90 degree sound cone radius below. The base mounted integral microphone is protected from dust and moisture ingress for long life. Once programmed, the hinged door is screwed sealed closed as the enclosure is IP65rated. Standard instrumentation 4­-20mA signal data can be transmitted to a Central Control Room or DCS for trending, recording or for local display. Internal relays are provided foraudible annunciation or visual alarms. Prior to installation a sound survey would be undertaken to establish an optimum location for IRD7111. Based on machine distance from the microphone the appropriate db warning and alarm levels can be set. The IRD7111 is also provided with ‘FAST’ option to select Peak Measurement, if required. The transmitter’s output current is 4mA DC (when the input sound signal corresponds to the base threshold) and 20mA DC (when input sound level corresponds to full scale) with an accuracy of ± 2dB of full scale range.

10 Year Qualifi ed Life at 110OF (Operating Temperature) Qualifi ed to 6 x 106 Rads TID (Gamma) Seismically Qualifi ed to 7.5 Gs DBE LOCA Profi le to 1550F Outputs: 4-20 mA (Standard)10-50 mA (Optional)

• Accuracy: 2.00%
• Material: SS316
• Input line signal: 24 VDC
• Measuring Range: 0-100% LEL
• Minimum Detectable Concentration: 0.1% LEL
• Humidity: 15 to 95% RH, typical, 0 to 99% RH intermittent (non-condensing)
• Display Type: Digital
• Detector Type: Fixed Single Gas
• Name of Gases Detected: LPG
• Model: OLCT700 IR
• Brand: Oldham
• Power Source: Plug-In
•  :  

Indoors or outdoors, our PrimaX I Gas Transmitter provides dependable, accurate gas detection. The transmitter detects toxic gases and oxygen and is housed in an antistatic, reinforced nylon enclosure. It also has a large, easy-to-read LCD screen and attaches to an integral mounting plate for easy installation, while the built-in keypad makes for quick, simple calibration. To transmit data, the unit uses a 4-20 mA output signal and can also be configured to use HART digital communication. With easily replaced plug-in sensors, the PrimaX I transmitter is suitable for laboratories, chemical plants, power plants and several other industry settings.   The indoor/outdoor PrimaX I Gas Transmitter detects toxic gases and oxygen Worry-free transmission with a 4-20 mA output signal and optional HART digital communication Plug-in sensors and easy installation and calibration make this transmitter virtually trouble-free Large LCD screen provides information at a glance

Field, wall mount universal transmitter. Available in Weather-proof, Blind and Explosion-proof housing. Standard 4-20 mA transmission, compact electronic module. 2 wire or 3 wire technology. Suitable in the hazardous area.

Indicating or Non Indicating. Discrete Analog 4- 20mA. Compatible with PLC, Scada and DCS. Power Supply 24VDC Gas Specific, Long life Sensor.  Relay contacts could be typically used to actuate remote alarms, increase ventilation, shut off gas supply, or shut down a process. Should it not be feasible to install the sensor at the desired location because of maintenance, or operational consideration, a suction based sampling system can be employed. The Sensors Detectors are of very sturdy construction, with weather proof or ex-proof housings and are designed to serve for several years under normal Operating Conditions.

• Application: Industrial
• Item Code: SCC633
• Voltage: 4-20 mA
• Resistance: 0 up to 400

• Features: Higher accuracy and better lifetime achieved using NDIR sensor Technology, Optimized for detection of smallest leak of Combustible gases and Carbon Dioxide, Highly resistant to poisoning and etching
• Applications: Gas Metering Station, Gas Metering skid, Gas Cylinder Bank, Oil & Gas Industries

  Danfoss pressure transmitters help you keep demanding industrial processes under control. Accurate, robust and built for long life, they perform reliably day after day, even in the harshest environments.

• Type: Differential Pressure Transmitters
• Material: Aluminium, Plastic, Polyester Film, Raw Aluminium
• Certification: CE Certified
• Weight: 0-50gm, 100-150g, 150-200gm, 200-250gm, 250-300gm, 300-350gm, 350-400gm, 400-450gm, 450-500gm, 50-100gm
• Color: Blue, Grey, Light White, Metallic, Silver, White
• Application: Industrial Use, Pressure Measurement
• Frequency: 50Hz, 60Hz
• Driven Type: Battery
• Feature: Auto Controller, Dipped In Epoxy Resin, Durable, High Performance, Stable Performance
• Temperature: -25 +85deg C, -40 +70deg C, -45 +55deg C, -70 +40deg C

humidity transmitters, Sensors, Thermowell, level sensors, Humidity Sensors

autrol smart pressure transmitters, drexelbrook radar level transmitter

Microvision Consistency Transmitters, lattice aprons, singeing machine