Transmitter Device Dealers in Borivali, Mumbai (15 products available)

Pressure sensors, Pressure transmitters with 4 20 mA & Voltage output, Piezoelectric & Piezoresistive type, High temperature sensor, Contact Pressure Sensor, Hydraulic & Pneumatic machines, Automotive & Aerospace testing.

• Feature: Reliable , Sustainable, Hassle free performance.

• Feature: Heavy Industrial, High EMI rated, Reverse Polarity Protection, Extended temperature range
• Applications: Industrial Process Control and Monitoring, Advanced HVAC Systems, Refrigeration Systems, Automotive Test Stands, Off-Road Vehicles, Pumps and Compressors, Hydraulic/Pneumatic Systems, Agriculture Equipment, Energy Generation and Management
• Brand: MEAS Vacuum Transmitter / American Sensor Technologies (AST)
• Operating Temperature: -40 to +125 deg C
• Output: 4 to 20 mA
• Process Connection: 1/4" BSP
• Accuracy: +/-0.25%

Details : Two wire design (supply and output on the same lines). Accepts RTD (Pt-100) / thermocouple / millivolt input. (4-20) mA non-isolated and isolated output. ZERO and SPAN adjustments for on-site calibration. Loop supply of 12 to 36VDC (with loop continuity LED). Saturation or open sensor current limited to 25Ma. Reverse polarity protection. Available in both Field mount and DIN rail mount versions. Special model ISO-12 for 4-20mA to 4-20mA isolation.

• Material: Metal
• Application: For Liquid Measuring
• Frequency: 25-50Ghz
• Beam Angle: 0-5 Deg
• Range: Up to 10 meters
• Accuracy: Better than +/- 0.5 %
• Signal output: 0 to 10 V DC or 4 to 20 MA

Avail feature packed Ultrasonic Level Transmitter from our company. Ultrasonic Level Transmitter, offered by us, is used to monitor and control the level in the closed or open tank with the medium water, slurry, paste, lumps etc. The Ultrasonic Level Transmitter, that we offer, has got very wide application in almost all industries. Installation of Ultrasonic Level Transmitter is very simple and fast. The reading in our offered Ultrasonic Level Transmitter can be either in millimeters, centimeters, inches, feet, meters, or any other engineering unit required by the customers. Online Calibration is possible.

• Output: (4-20)mA, two wire and loop powered (calibrated linearly to the input signal)
• Input: Thermocouple, mV, Pt-100 or resistance signal from displacement, position or level sensor.
• Calibration: On site using ZERO / SPAN presets
• Loop Supply: 12 to 36 VDC
• Loop Resistance: 600 Ohms @ 24 VDC (Loop supply dependent)
• Loop Continuity: Using built-in red LED Indication
• Mounting: Standard weather proof or Flame proof head.
• Operating / Storage  Temperature: 0-70 degree C. Max. /0-50 Degree C.      Max. @ 10-85 % Rh (Non-Condensing)
• Size: 44 dia x 26 ht. mm.

Description : Since the signals generated by thermocouples or resistance sensors are low on emf and resistance, they can be transmitted over a short distance using compensating and three wire cables, without the loss of signal strength and accuracy. However, to transmit signals over very long distance without loss of accuracy, Two Wire loop transmitters are widely used. The low level signal converted to 4-20mA current output can be transmitted over long distance using a pair of normal copperwire. Accuracy of output current shall be independent of the lead resistance and length of the cable. The transmitter, fits directly into standard terminal head both weather proof or Ex-proof. Application : For converting thermocouple or Pt-100 or resistance signal to equivalent 4-20mA signal for long distance transmission.

• Features ::  

The Sensor Transmitter Integrated Area Monitor (ST-IAM) utilises a range of sensor technologies to detect most gases. The ST-IAM can be used on a stand-alone basis or integrated into Controls or Building Management Systems (BMS).   Application :   Refrigerant gases all refrigerant gases including: Ammonia, Carbon Dioxide, Hydrocarbons, Halocarbons - HFCs, HCFCs, CFCs.   Combustible gases such as: Methane, LPG, Propane, Butane, and Hydrogen   Toxic gases such as: Carbon Dioxide and Ammonia in refrigeration, Hydrogen Sulphide in sewage treatment and Carbon Monoxide in underground car parks   Volatile Organic Compounds such as: Acetone, Benzene, Carbon Tetrachloride, Chloroform, Ethanol, Toluene, Trichloroethylene.

Libratherm offers Miniature Head Mount Two wire Temperature Transmitter Model LTX-3000, which accepts RTD (Pt-100) or thermocouple as the input and provides output of (4-20) mA proportional to mV or resistance input. These transmitters are extensively used to minimize the effect of electrical noise and to eliminate the need of long runs of special compensating and three wire cables since ordinary pair of copper wires can easily be used without the drop or loss of input signal. Also, the current signal is less susceptible to industrial RFI/EMI noise compared to the voltage signal. These transmitters are linearized to the millivolt signal produced by a thermocouple or RTD sensors and not to the actual temperature.LTX-3000 require no separate power supply as it is powered by current drawn from the current loop itself and is thus intrinsically safe when used with appropriate barriers. It is very compact, economically priced and can be directly mounted inside standard heads of the thermocouple or RTD sensors. It can also be easily fitted inside the flame proof / weatherproof head or junction box. It is available for different thermocouples, RTD (Pt-100) duly calibrated for required temperature range with ZERO and SPAN adjustments for on site calibration. LTX-3000 is available in the standard size of 44 mm. OD and 26 mm. height (with the terminals). The Transmitter is also available in DIN Rail compatible modules.ApplicationCarry thermocouple or RTD signals over long distance using ordinary copper wires – without noise and loss of accuracy. Eliminates use of costly compensating cable.Can be directly interfaced with PLC, DCS, SCADA, PID, Program controllers etcâ€Â¦Transmitters are available with Thermocuple and Pt-100 sensors with Aluminium die cast head or Flame Proof Head.

Since the signals generated by thermocouples or resistance sensors are low on emf and resistance, they can be transmitted over a short distance using compensating and three wire cables, without the loss of signal strength and accuracy. However, to transmit signals over very long distance without loss of accuracy, Two Wire loop transmitters are widely used. The low level signal converted to 4-20mA current output can be transmitted over long distance using a pair of normal copperwire. Accuracy of output current shall be independent of the lead resistance and length of the cable. The transmitter, fits directly into standard terminal head both weather proof or Ex-proof. APPLICATION : For converting thermocouple or Pt-100 or resistance signal to equivalent 4-20mA signal for long distance transmission.

ac dc drive, Electrical Repairing Service

Honeywell Pressure Transmitters / Transducers - Heavy Duty

Transmitter, Cfl Light, Electric Cable, Electric Panel, electric wires

consistency transmitters

position transmitter, Fire Damper, Linear Three Phase Actuator

Drager VarioGard 33x0 IR Transmitter, Drager Gas Detector