Viscosity Meters Dealers in Mumbai

It is used to determine absolute or dynamic viscosity of bitumen and cut-backs by vacuum capillary viscometers at any specified temperature. It is applicable for the materials having 42 to 200000 Poises. Supplied complete with manufacturers Test Certificate for Constant under Vacuum 30 cm Hg of Bulb B & Bulb C.

Our second generation of Laray Viscometer is designed for direct viscosity results without plotting of graph or use of software. It gives an instant and in-depth analysis of viscosity measurements by using advanced automation tools to directly calculate the viscosity and other parameters. It is a sturdy design which can withstand day to day industrial use in the field of printing inks, resins and allied coatings manufacturing. It features a very simple method of calibration     Features Specification Accessories Auto / Manual mode for quick and easy operations Temperature sensor inbuilt inside the visco - Orifice for actual test temperature Instant result in ASTM D4040 or Laray calculation method Very high reproducible results Special steel used for Viscobar and Orifice for longer life and reduced wear and tear Glass rod for low viscosity fluids e.g. newsink Water-jacket around the Orifice for accurate controlling of the test temperature Sturdy design in full stainless steel with Negligible or No Maintenance Highly reliable Industrial grade electronics

Ford Cup Viscometer     Model Nos:B4 with Stand, B2 with Stand, B3 with Stand, B5 with Stand, B6 with Stand, B8 with Stand, B10 with Stand, Calibration Charges are extra for all models

Having advantage of high accuracy, stable digital display. Easy to operate and good anti-interference. It is widely used in the measurement of viscosity of various kinds of fluids such as grease, paints, food, medicine, adhesive and cosmetic etc., it can also be used for liquids. Its with large LCD display measurement ranges is 10 to 100,000m Pa. s with 4 Spindles. 6123060 rotor speed (RPM).

BROOKFIELD STANDARD VISCOMETER U.S.A Make a) DIAL READING (ANALOG) Viscometers Model LVT / RVT / HAT / HBT with Electronic Drive b) DIGITAL Viscometers Models LVDV-E / RVDV-E / HADV-E / HBDV-E c) DIGITAL Viscometers Models LVDV-I P / RVDV-I P / HADV-I P / HBDV-I P ( P = Prime) d) DIGITAL Viscometers Models LVDV-II + PRO / RVDV-II + PRO / HADV-II + PRO / HBDV-II + PRO e) DIGITAL Ultra RHEOMETER Models LVDV-III U / RVDV-III U / HADV-III U / HBDV-III U Silicon Viscocity Standards Brookfield USA : General Purpose Silicon FluidsAvailable : 5, 10, 50, 100, 500, 1000, 5000, 12500, 30,000, 60,000, 1,00,000 Cp DIGITAL ROTATIONAL VISCOMETER FUNGILAB SPAIN Make a) ALPHA L - Range 20 - 20,00,000 cP, b) ALPHA R - Range 100 - 1,30,00,000 cP, c) ALPHA H - Range 200 - 10,60,00,000 cP b) SMART L - Range 20 - 20,00,000 cP, b) SMART R - Range 100 - 1,30,00,000 cP, c) SMART H - Range 200 - 10,60,00,000 cP c) EXPERT L - Range 20 - 20,00,000 cP, b) EXPERT R - Range 100 - 4,00,00,000 cP, c) EXPERT H - Range 200 - 10,60,00,000 cP d) PREMIUM L - Range 20 - 20,00,000 cP, b) PREMIUM R - Range 100 - 4,00,00,000 cP, c) PREMIUM H - Range 200 - 10,60,00,000 cP All Spares Item Available for Brookfield Viscometer & Rheometer

A viscometer is an instrument used to measure the viscosity of a fluid. For liquids with viscosities, which vary with flow conditions, an instrument called a rheometer is used. Viscometers only measure under one flow condition. We can provide Digital Viscometers of all types and sizes.

Mooney Viscometer is a shearing disk viscometer, designed for accurate measurement of viscocity, scorch time and cure rates of the elastomers.The instrument consists of flat, cylindrical disk, driven by a motor to rotate slowly and continuously in one direction. This disk is embedded into elastomer specimen which is confiend in a heated die cavity maintained at specified temprature and kept closed by a specified force. As the disk rotates its experiences a shear strain. This resistance to rotates offered by the elastomer is shearing viscosity which is proportional to mean absolute viscosity of the specimen.Normally a preheat period is given to the elastomer following which the disk starts to rotate. A initial high viscosity is recorded and then as the viscosity also decreases, to a minimum value Viscosity obtained with large rotor are approximately twice those of small rotor.The viscosity is reported as under Method of sample preparation Mooney viscosity number Rotor size Preheat time Time interval to viscosity reading Tamperature of test Typical test results are started as under= 50ML(I+4) 100CWhere 50M = Viscocity in mooney units. L = Large rotor (for small replace it with 'S') I = Preheat time in minutes 4 = Time in minute after starting the motor at which the reading is taken 100 C = Test temprature

Description It is suitable to determine Kinematic viscosity, viscosity number, and limiting viscosity number of oils and polymer in dilute solution. It has been widely used in the field of pharmaceutics, petroleum, chemistry, scientific research, and metrology. Main technical features 1. This instrument adopts micro-computer as the central control component. It achieves prompt type operation.2. This instrument can intelligently control the whole procedure of the test. It achieves the full automation of keeping temperature constant, time detection, viscosity calculation, viscometer tube cleaning and drying, and automatically print out test result.3. This instrument has ability of fault identification and processing. It is convenient for user to analyze and judge the condition of instrument. SpecificationMain technical specifications 1. Viscometer tube: Ubbelohde viscometer (Dilution type);2. Temperature controlling range: Room temperature?100 ?3. Temperature controlling accuracy: ±0.1?4. Timing accuracy: ±0.1 s5. Maximum timing time: 999.9 s6. Power supply: AC 220V±10%, 50 Hz7. Maximum power consumption: 2000 W8. Ambient temperature: 0??40?9. Relative humidity: 20?90% at 40 ?10. Barometric pressure: 96 kPa?103 kPa11. Dimension: 800mm×530mm×610mm(circulating bath and vacuum suction apparatus are not included ) Note: The instrument is equipped with four pieces of Ubbelohde viscometer tubes in standard packing list. The inner diameters for each is 0.8mm,1.0mm,1.2mm and 1.5mm. If the user need other kinds of viscometer, pls inform us for customizing.

Milton Viscometers are designed to monitor and control quality stability in production process. These Viscometers are applied to Solvent, Grease, Adhesive, Emulsion, Ink, Paint, Plastic, Paper pulp, Drugs, Detergents, Coatings and Cosmetics.     ViscometerSeries [1~2x101 - 1~2x101] Solid and Reliable Design Microprocessor Controller Fast Weighing Response High Brightness LED display Automatic External Calibration Auto Zero Tracking Auto rechargeable battery backup up to 25 Hrs. Counting application along with g to lt unit conversion RS232 Interface optional  

We are leading supplier of cone & plate ICI viscometers for wide section of international industries involved in paint, varnish, resins, bitumen’s, inks, food and pharmaceutical production.