Water Bath Dealers in Mumbai

Lloyds Water Bath system has been specifically designed for the convenient use with jacketed instruments such as Inkometer, Inkoscope, Tack-O- scope, Viscometer and other laboratory instruments for accurate temperature control. It offers a bath reservoir area that is typically used to hold up to 2 samples such as small flasks and beakers. The integral pump circulates the bath fluid within the tank and the external equipment in open or closed loop formation   Features Specification Connect up to 2 separate instrument in series or parallel Highly reliable micro-controller based electronics All wet parts made up of seamless 304 steel Powder coated corrosion resistant exterior Temperature overshoot cut-off protection Sturdy design capable to work 24 X 7 Special designed all metal pump

Refrigerated water baths are widely used for day bacteriological and varied laboratory application requiring incubation as well as general test and procedures in a variety of research and testing laboratories including Wassermann, Kilmer tests. Apart from that these refrigerated water baths have a variety usages in tissues culture application, enzyme reaction studies, growth observation studies, fermentation analysis and various other general specialized application in various laboratories. We specialize in both standard and customized models, specifically designed to meet the challenging demands of various scientists for individuals and specialized research application. Apart from that we are supplying out refrigerated water bath in India catering to variety of customers ranging from defense installations, Research laboratories, Educational Institutes and various R & D laboratories of leading a national an multinational companies. Construction Details refrigerated water bath: Our refrigerated water baths are double walled convection heated units, outer body of our refrigerated water baths is constructed out of thick PCRC steel sheet, duly pre-treated with primers for rust proofing and painted with air drying paint / stove enamel / powder coating. The inside chamber of the unit is made of heavy gauge stainless steel sheet of grade ss304. the unit is provided with one stainless steel racks. Heating: Indirect heating system is provide in our refrigerated water bath comprising of air heaters made of high grade kanthal A-1 wires of suitable wattage. The temperature is evenly distributed throughout the chamber through natural water convection mechanism ensuring a very good temperature sensitivity. Cooling : An energy efficient cooling unit is installed in our carbon dioxide incubator to enable bio chemical demand studies at lower room temperature. We uses ISI marked high end CFC free comressors of kirloskar / Tecumseh make, conforming to latest international standards and guidelines. Temperature Range: Temperature range of standard refrigerated water bath models are 50 c to 850 c However we have capacity modify the same suit the individual specialized requirement of out customers Temperature Sensitivity: Temperature inside our refrigerated water bath is controlled with a sensitivity of +-0.5o c or better(with PID Controller ) Front Panel: Front panel of our refrigerated water bath comprises of on / off switches h heating & mains indicator lamps and temperature controller. Internal Capacity : Standard 5 lt/10 ltr/20 ltr/35 ltr/ 50 ltr. Note : The above mention sizes are of our standard refrigerated water bath. However we are fully capable to cater to demand of any customized size for any special application.

Serological Water Bath manufactured by us has inner body made of stainless steel with mirror polish and outer body made of mild steel. The epoxy powder coat finish of Low Temperature Water Bath increases its life. We also provide high grade glass wool insulation and high quality heating element in our outstanding quality serological water bath. Due to its excellent performance, we are known widely as one of the prominent High Precision Water Bath Manufacturers in India. Features :-     High grade glass wool insulation     Immersion type high quality heating element     With Pyramid Lid or Khan Rack       Optional Digital Temperature controller & P. T – 100 Sensor Facility       Temp. Range : Up to 99oC       Price List :-   WORKING SIZE CAPACITY 10" X 6" X 7" 2 RACKS 14" X 10" X 7" 4 RACKS 18" X 12" X 7" 6 RACKS

Description :-Circulators & baths are mainly used in laboratories for controlling temperature. There can be refrigerated or heated circulators and baths available. They are primarily used for cooling or heating liquid samples to maintain or obstruct various reactions. There are some varieties of circulators and baths, which are used to agitate samples. Baths are usually made of stainless steel with immersion circulators. Proper design of circulators and baths include a number of physical and mechanical features. Circulators and bath featuring conventional design have separate heating and cooling devices, which are immersed in bath liquid. The bath fluid needs to stirred effectively to maintain an even temperature. The stirring of fluid should be done very carefully so that there is no bubble formation in the fluid. The equipment is provided with a temperature control system, including the temperature sensor in order to maintain uniform temperature for longer duration. The most commonly used fluids in circulators and baths are oil and water. A wide variety of high-dielectric fluids are also used for temperatures below 32º F and above 212º F. In this case, use of water would not be feasible.

KI-49S: Shaker Water Baths (Metabolic Shaker)   - Drive is by geared motor having variable speed control upto 150 strokes/min.Temp. Range: Amb. + 5 to 95ºC + 0.5ºC. S.S. Chamber with Gabled Lid.Optional Accessories:-- Tray fully made of stainless steel with lotus clamps for different capacity of flask to load 25 ml. 50 ml. Or any other smaller size flask.

We are a well-reckoned Constant Temperature Water Bath Manufacturer and Supplier, located in Mumbai. The Constant Temperature Water Bath, available with us, is appreciated for offering hassle-free performance. The Constant Temperature Water Bath is user-friendly and requires very low maintenance. Avail precision made Constant Temperature Water Bath from us at industry leading prices. Attributes Dimensional accuracyDurabilityUser-friendlinessIn compliance with the highest quality standards

Double walled round inner made of thick gauge stainless steel argon wielded and exterior made of G.I. / Stainless steel. The gap between two walls is filled with glass wool insulation. The temperature of Digital Water Bath is controlled by thermostat. Besides, the heating in Digital Water Bath is by specially designed oil heaters.

SHIVANI LAB EQUIPMENTS make General Purpose Constant Temperature bath, used in Medial, Pharm, Defense, Industrials, etc..Temperature range : +5 above ambient to +99.9°C. Microprocessor-based temperature control system.Stainless steel interior, Outer is painted steel panel, Insulation Glass wool.Stirrer pump for water circulation. Special water heaterPower supply: 220V /50Hz 1 phase.

Body made of Stainless Steel Sheet Top of the bath and concentric rings are chromium plated. Automatic cutt-of device for heating elements when bath gets dry Power Supply -220230 Volts A.C. 50 Hz

Rectangular Water Bath Single walled made of stainless steel with concentric rings and a lid are provided on hole. The bath has a built-in constant level arrangement. Suitable for use on 230 Volts AC single phase supply    

The Shaker Water bath is double walled with glass-wool insulation from all side. Outer M.S enamel painted and inner chamber stainless steel polished .Removable S.S tray with lotus clamps suitable for various flasks is fitted inside the workinf chamber. The speed and stroke length of tray platform is adjustable. Tublar S.S sheath heater are fitted below platform are controlled by Digital Temperature Controller. Temperature Up to 100? C=0.5? A timer can be provided. The Unit have gabled lid added drain cock.40 to 160 strokes per minute.Speed control by solid regulator.

We are a leading manufacturer and supplier of Water Bath. These instruments are reckoned for their superior quality, low power consumption and reliable functionality for a longer period of time. Further, we are also striving hard to fulfill our future plans of expanding our business, provide improved models at reasonable prices and venturing into export. 

LC-54: WATER BATH (Regular) Double walled STDGMP Model. The gap between the walls is filled up with special grade glass wool for proper insulation to avoid heat losses and thereby saving energy. Temp Range : 5°C above ambient to 95°C ± 0.5°C controlled by Thermostat ;6 or 12 holes of 7.5cm dia with set of concentric rings for each hole. Completed with argon welded all joint to avoid water leakage Temp. Control by : Microprocessor base double display auto tune PID Temp.Controller Safety : Low Water Label cut off system arrangement

We are one of the leading Manufacturers and Suppliers of Laboratory Water Bath. Laboratory Water Bath, offered by us, is double walled unit with inner chamber and top lid (pyramidal) made of S.S., and outer chamber made of M.S. with powder coating. There is a gap between the walls filled with glass wool insulation to avoid heat loss. The inner chamber of Laboratory Water Bath is fitted with immersion type heating element. Features : Temperature range 5oC above ambient to 60oC with accuracy of ± 2oC Long casting heating element Operates on 230 Volts AC only