Water Meters Dealers in Mumbai

We are providing quality Water Heater Indicator that is available in different types to best suit plugging to the thermostat with required voltage range. Specification: Light Color: Red Voltage: 220V

• Country of Origin: Made in India
• Material: Brass
• Display: Analog
• Size: 0.5 - 2 Inch
• Brand: kranti
• Usage/Application: Industrial
• Line Size: 15mm-110mm
• Warranty: 1 Year

The company offers an ultimate variety of Water Flow Meter that operates on the velocity principle in which water enters the measuring chamber through a number of ports and drives the inner rotor. In this Water Flow Meter, the movement of water is transmitted via a gear train and magnetic coupling to the vacuum-sealed register for recording the reading.

Accuflow® make Super Dry Dial, Multi Jet,  Water Flow Meter Screwed Ends. Magnetic Drive.  Ø  Vacuum Sealed Totaliser / Register. Encapsulated  in Polymer  Housing , having  5mm Thick toughened glass for clear visibility. Ø  Having reading in m³. Ø  MOC : BODY made from Copper Alloy (BRASS) with high quality fusion bonded powder coating inside and outside the meter body for Max. protection. Ø  Conforming to ISO: 4064 Class ‘B’ Ø  Temp. suitability max. upto 45⁰ C. SIZE : 15mm

We are one of the leading Suppliers of high quality Water Meters in the market. Our range of Water Meters includes 40 � 600 mm Water meters, most of which have ISI approvals. We provide the best quality Water Meters to the customers which are fabricated out of high grade raw material. These Water Meters are available at highly economical prices. Our Water Meters are completely efficient and provide optimum efficiency. Types Domestic Multijet Type : (40mm and 50mm)Bulk Type Meters : (50-500 mm) Features Available in several sizesWide range of optional accessories is availableHigh grade raw material usedGreater working life

All type of water meters brand kranti, capstan,.etc.

• Range: From 0.2 to 150 m3/Hr (Water Flow),From 6 to 4500 Nm3/Hr (Air Flow)
• Temperature Rating: -50 to 120 oC

This magnetic flow meter uses magnetic float which is detected by highly sensitive magnetic field detection sensor which enables to show digital readout. This flow meter does not require any electrical connection, as it operates on replaceable battery. This flow meter has in built two wire transmitter i.e 4-20 mA output.

• Type: Water Meters
• Material: Aluminum, Brass, Cast Iron, Plastic, Stainless Steel
• Color: Green, Red
• Feature: Accuracy
• Application: Industrial, Residential
• Operating Temperature: 10-50D/C
• Automatic Grade: Automatic, Manual, Semi Automatic
• Display: Local
• Warrenty: 1 Year

1) Woltman Water Meter We are manufacturer and dealer of world class Woltman-type Water meter designed for measuring bulk flows of cold /hot potable water in commercial or industrial applications and distribution system monitoring. The meter complies with all relevant international quality standards, ISO4064 Class B specifications for forward flow installations in horizontal, vertical and inclined pipelines.   Special Features: Dry-dial, Magnetic Transmission. Vacuu m sealed register. Measuring accuracy conforms to ISO 4064 class B. Low Driving Resistance. Removable Element Mechanism for easy online repair and Maintenance.  

We are amongst the leading flowmeter manufacturer in Mumbai, India . Recognized for our high accuracy in high flow water & gas rotameters Our manufacturing capability backed by our accuracy of flowmeter resulting in to list of ever increasing satisfied customers . “Telelin” make high accuracy, clear acrylic plastic body rotameter uses tapered tube drilled directly in acrylic plastic body itself, acrylic plastic is highly stabled, chemical resistant and gives glass like clearness which enables clear visualization of flow. In Acrylic Body rotameter, Flow range is calibrated, engraved and coloured with black on body itself for long lasting durability. Acrylic body rotameters are generally used for Air, Water and Gases. Telelin make Acrylic body flowmeter (rotameter) with Screwed top & bottom connection as per specifications below

• Size: 4 - 6 Inch
• Material: Mild Steel
• Display: Analog
• Country of Origin: Made in India
• Usage/Application: Industrial
• Packaging Type: Box

• Bulb: 2Watt
• Usage/Application: Mahindra Car
• Operating Voltage: 12V
• Brand: Pricol
• Dial Range: 110*c
• Casing Size: 50mm

Air or Gas samples up to 12kg/cm² pressure and temperature up to 75°C can be directly measured. For higher temperature applications, a Heat sink tubing can be used. The meter can also be connected to a vacuum pump for sampling from systems at low or atmospheric pressure. AMM 60 Measures the dew point precisely by utilizing a highly reliable microprocessor based electronic circuit to convert the sensor signal by the use of psychometrics equations. Assembled in a ABS plastic housing, It has inbuilt sensor manifold with an orifice that means line pressure for true pressure dew point readings. Endee Model AMM-60 Dew Point Meter, a portable instrument is designed to measure the performance of compressed air and process drying systems. It is ideal for Moisture monitoring in commercial and industrial applications. Periodic monitoring of industrial Air systems results in a reduced maintenance cost & down time caused by condensate, the leading cause of corrosion in pneumatic systems. Handy and Light Weight Instant Direct dew point reading Digital Display Over all range - 60° C TO + 30°C Samples Pressure Upto 12 Kg/C2M Inbuilt Thin film water vapour sensor Optional RS 232 Computer Interface & Data Logger

• pH Range: 0 - 14
• Resolution: 0.01 pH; Temperature resolution is 0.1 °C/F
• Calibration: Digital automatic calibration (one point) with digital fine tuning
• Power Source: 3 x 1.5V button cell batteries (LR44 or equivalent; included)
• Weight: 96.4 g (3.4 oz)
• Temperature Range: 0-55 °C; 32-130 °F
• Accuracy: +/- 0.1 pH; Temperature accuracy is +/-2%
• Minimum EC/TDS: 5 uS/10 ppm
• Electrode: Replaceable glass sensor and reference tube electrodes
• Housing: IP-67 Waterproof (submersible; floats)
• Dimensions: 18.5 x 3.4 x 3.4 cm (7.3 x 1.3 x 1.3 inches)

• Accuracy: 0.05% / 1C / 2% / 2% / 2% / 0.1%
• Display: LCD
• Power: 6V DC Adaptor
• Model: PHT-028
• Parameters: pH / Temp / EC / CF / ORP
• Range: 0 - 14 / -50 to 70C / 0 - 19.99 EC / 0 - 199 CF / -1999 to 1999 mV

PH Controller, Conductivity Controller, ORP controller, water quality controller, Water Quality Monitor, ph/orp controller   PHT-028 Multi-parameter 6 IN 1 Water Quality Monitor This indicator combines 6 meters into one easy to use wall mounting continuous monitor. Featuring a large, dual-level, back-lit LCD display the meter can display the EC/TDS/CF of your solution together with the choice of either pH, temperature or Oxidation-Reduction Potential (ORP). Precision pH monitor immediately detects changes in solution pH. With a 6 V DC power supply included with the meter (also included rechargeable battery). It is with BNC composite electrode, around the world to facilitate the replacement of electrodes, used.

• pH Range: -2.00 to 16.00 pH
• Resolution & Accuracy: 0.01 pH & ± 0.01 pH
• Dissolved Oxygen Range: 0 to 19.9 mg/l or ppm

Waterproof and Dustproof Housing - IP67 rated, ideal for rugged harsh conditions. Plus it floats! :: Multi-Parameter - toggle between DO (% sat or mgl), temperature and pH at touch of buttons :: Multi-Point Push-button Calibration (Up to 56 points) with Auto-Buffer Recognition :: User-Customization for enhanced flexibility with programmable functions like salinity and barometric pressure compensation, stability, electrode diagnosis - pH slopeoffsetmV base value, etc. :: No Meter Warm-up Required with Galvanic Cell - takes measurements immediately and produces quick response :: Stability Indicator prompts whenever reading stabilizes :: Auto-Hold Function automatically freezes reading when stabilized for easy viewing and recording :: Auto-Power Off saves battery power after non-use :: Self-Diagnostic with message codes for easy troubleshooting

We are the solution provider of Flow Measuring instuments based on various principals to meet the application requirements of process plants, briefly summarized below.

The AquaScat measures turbidity of potable water according to IEC 27027 using 90+° scattered light detection in a free-falling water stream (models WTM, WTM A, HT). This contactless design eliminates window foiling and minimizes servicing to a minimum. Calibration check is performed with a calibration unit that is either mounted to perform the check or that is already built in (depending on variant). APPLICATIONS Turbidity measurement in raw water Monitoring of flocculation and dosage of flocculants Filtration monitoring of filter performance and back-wash control Turbidity measurement in treated and final waters Turbidity monitoring of water in storage and distribution networks Turbidity measurement in process and waste waters True non-contact measurement in free-fall stream (models WTM, WTM A, HT) making it virtually maintenance free Dual beam measurement in optimized cell (model P) Re-calibration with secondary standard (fully automatic at model WTM A) Lowest stray light levels Convenient operation via touch screen Graphical display of trends and/or values Visualization of measured values over the previous month   SPECIFICATIONS Measuring principle:90° Scattered light according toISO 7027/EN27027 Light source: LED 880 nm Measuring span:0 .. 4‘000 FNU (WTM, WTM A, HT)0 .. 100 FNU (P) Measuring ranges: 8, freely programmable Resolution:0.001 FNU (WTM, WTM A, P); 0.1 FNU (HT) Sample temperature: 0 .. +40 °C Ambient temperature: –10 .. +50 °C Operation: Touchscreen Outputs:2 × 0/4 .. 20 mA, galv. isolated2 × Relays 250 VAC, 4A Inputs:1 × for optional flow meter2 × 0/4 .. 20 mA Digital interfaces: Ethernet, Modbus TCP, SD-card Optional: Profibus DP, Modbus RTU  

• Size: 210 X 188 X 60 Mm
• Usage/Application: Used To Check Water Quality
• Calibration Points: Up to 5 points
• Model Name/Number: LMMP-30
• Brand: LABMAN
• Weight: 1.2 Kg
• Resolution: 0.001, 0.01, 0.1
• Accuracy: +-0.002
• pH Range: -2.000

• Brand Name: Padmansha
• Feature: size, portable & light weight.
• Place of Origin: Maharashtra, India
• Packaging Details: As per client's requirements Export worthy packing.
• Port: Nhava Sheva(Mumbai)

• Size: 1/2"-2" (15mm to 50mm)
• Body Material: Corrosion Proof Copper Alloy
• Maximum Working Pressure: 16 Bar
• Features: Reliable performance

• Size: 0.5 inch
• Display: Analog
• Material: Brass
• Country of Origin: Made in India
• Brand: Capstan
• Usage/Application: Industrial
• Warranty: 1 Year

• The ideal instrument for IQ/OQ/PQ and troubleshooting• Accurate to 1% of reading with guaranteed linearity from 0.05 to 25.00 ml/min• Durable and easy to use with any HPLC pump• Easy diagnosis of leaking piston seals or malfunctioning check valves• Automatic Data Transfer- Dramatically simplify liquid flow rate data collection for HPLC IQ/OQ/PQ- Collect flow rate data via RS232 or with a new optional battery powered mini printer or with software• Specially design software converts data received in to pdf file. Average set of data & gives average reading, mean valuestandard deviation & many more PCI is pleased to introduce the FlowCal 5000 ​Models Availible-  Name - LFM-01 Calibration Point - Single Calibration at - 1.0 ml / min Name - LFM-02 Calibration Point - Three Calibration at - 0.5, 1.0, 2.0 ml / min Name - LFM-03 Calibration Point - Four Calibration at - 0.5, 1.0, 1.5, 2.0 ml / min  **Five Point Calibration Also Avalible The new instrument measures liquid flow over a wide range, from 50μl/min to 25ml/min. You can see the working flow ranges and accuracy in the table below. Flow rate is measured by volume and is independent of the liquid type up to a viscosity of 10 centipoise.The unit uses a single chip micro-controller, the flow rate (rounded to four digits) is displayed on a large four digit back-lit Liquid Crystal Display (LCD) and data can be conveniently output via the built-in RS232 interface to the full 6-digit reading. No user calibration is required; the unit is generally supplied gravimetrically calibrated at 1.0 (+10%) ml/min. Calibration at multiple points is available. All wetted parts are made of PTFE , PEEK, DAI-EL PERFLOUR or Pyrex glass. There are no wetted metallic parts. Three modes of operation are available:• Printer Mode: liquid flow readings are displayed on the LCD and output to a printer if one is connected. A running average option is available in this mode• Terminal Mode: in this mode the liquid flowmeter is controlled by the terminal or PC. Extra commands for averaging any number of readings are included.• Test Mode: this mode allows the user to test the display, valve and RS232 interface and also display the calibration date. The RS232 output allows the flowmeter to output data to any device fitted with an RS232 serial interface e.g. printer, terminal or personal computer. The unit is supplied with an RS232 cable fitted with a nine way female plug to connect directly to the COM port of a PC. By using the Terminal or Hyper-Terminal program supplied with MS Windows results can be collected and displayed or pasted into Excel or other programs to produce graphs or statistical analysis. The baud rate is internally switch selectable for 19200, 9600, 4800, 2400, 1200, 600, 300 baud with the option of sending a CR/LF after each reading. X-on / X-off handshaking is used. All instruments are supplied with the following:• Mains ‘wall block’ power supply with a choice of 240v 3 pin UK, 230v 2 pin European or 100v 2 pin USA/Japan.• RS232 input/output cable: 8way mini-din plug to PC COM port 9 pin female.• UKAS traceable single point flow calibration certificate is supplied as standard (UKAS is the UK equivalent of NIST)• Universal mounting kit: allows free standing mount, wall mounting, ‘stack system’ mounting and bottle top mount.• Black plastic carrying case with foam inserts. All parts of the mounting kit are packed within the carrying case.• Cleaning kit now supplied with the flow meter. FlowCal 5000 Specifications• Reading Update Time- 15 sec @ 2 ml/min- 25 sec @ 1 ml/min- 45 sec @ 0.5 ml/min• Measuring Volume - 140 μl• Priming Volume - 250 μl• LCD Display - (12.7mm)- 4 digits and 3 status symbols• RS232 output - (6 digits) XX.XXXX ml/min• Size - 138mm x 76mm x 45mm• Weight - 320g, 12 oz

  Accuracy : upto ±2% Design Temperature : upto 90°C Design Pressure : upto 16 Kg/cm2 5 Digit Display Screwed & Flanged End connections

Waterproof and Dustproof Housing - IP67 rated, ideal for rugged harsh conditions. Plus it floats! :: Multi-Parameter - toggle between DO (% sat or mgl), temperature and pH at touch of buttons :: Multi-Point Push-button Calibration (Up to 56 points) with Auto-Buffer Recognition :: User-Customization for enhanced flexibility with programmable functions like salinity and barometric pressure compensation, stability, electrode diagnosis - pH slopeoffsetmV base value, etc. :: No Meter Warm-up Required with Galvanic Cell - takes measurements immediately and produces quick response :: Stability Indicator prompts whenever reading stabilizes :: Auto-Hold Function automatically freezes reading when stabilized for easy viewing and recording :: Auto-Power Off saves battery power after non-use :: Self-Diagnostic with message codes for easy troubleshooting

• Features: Reliable functionality, Unmatched quality

• Warranty: One year
• Country of Origin: Made in the U.S.A.
• Features: Compact, Lightweight (<15LB) ,High Resolution,High benefit-to-cost ratio,Built in RTD & 4-20mA temperature transmitter, Frequency output for density calculation with customer-owned flow computer.
• Available Density: 4-20mA output
• Applications: Interface Detection, Live Density Monitoring ,Product blending ,Process quality control.

• Brand Name: ULTRASONIC
• Material: Brass
• Display: DIGITAL

Find out if you have oil or water in your compressed air lines! Finite’s new disposable indicators are an easy way to detect the presence of liquid (water or oil) in a compressed air system. The indicators will change from white to red when the respective liquid is present and provides peace-of-mind for critical applications throughout a facility.   KSDS-W: Detects liquid water.KSDS-O: Detects liquid oil.