International Trade Links Instrumentation Private Limited Kandivali East, Mumbai, Maharashtra

IP67 Waterproof and Dustproof - Cleaning and maintenance is simple. It floats! :: Automatic Push-Button Calibration (4 points) for unprecedented full-range accuracy :: Sturdy Carrying Kit complete with 4 calibration standards, 3 empty cuvettes, batteries and comprehensive instruction manual :: Power-saving feature allows over 1200 measurements to be taken with a single set of AAA alkaline batteries :: Large Easy-to-Read Display for optimum viewing of measurements with user-friendly message codes for easy troubleshooting :: Meets Performance Criteria as specified by ISO 1727 (DIN EN 27027) method

The measuring unit houses an integral data logger for data acquisition and processing with memory for up to 1200 readings. The model 58-E0049B combined tester is a compact apparatus including UPV meter and electronic rebound hammer. This provides significant practical and economic benefit by offering one system for both ultrasonic and rebound testing. The 58-E0049A version provides a lower cost alternative, which gives the same results measured using a standard concrete hammer 58-C0181N. The pulse velocity can be combined with the rebound hammer value for the strength evaluation based on the mathematical equation of the test report CUR 69 published by the Research Institute of the Dutch Concrete Association. Power supply: internal rechargeable batteries and internal battery charger

To measure the velocity of propagation of ultrasonic pulses through concrete. • Microprocessor incorporated • Frequency range: 24 to 150 kHz • Receive input impedance: 1 MΩ • RS 232 output • Connectable to oscilloscope • Transit time measurement: 0 to 1999.9 µs • Pulse rate: from 1 to 10 per second, selectable • Resolution: 0.1 µs • Transmitter output: 800 V • Battery operated

The Ring Shear apparatus tests an annular soil sample 5 mm thick with inner and outer diameters of 70 and 100 mm respectively and confine it radially between concentric rings. It is compressed vertically between porous bronze loading platens by means of a counter balanced 10:1 ratio lever loading system. A rotation is imparted to the base plate and lower platen by means of a variable speed motor and gearbox driving through a worm drive. This causes the sample to shear, forming a shear surface close to the upper platen, which is artificially roughened to prevent slip at the platensoil interface. The settlement of the upper platen during consolidation or shear can be monitored by means of a sensitive dial gauge or linear transducer bearing on the top of the load hanger. Torque transmitted through the sample is reacted by a pair of matched load measuring proving rings or load cells bearing on a cross arm.

The machine consists of a very rigid frame with double-acting cylinder assembly, and hydraulic power pump. A special flow control valve allows the rate of loading to be preset in accordance to the relevant specifications. Supplied complete with test selector valve for selecting tension or compression mode. Fitted with the Digimax Plus microprocessor digital display and processing system, which can be connected to the electronic extensometers 70-C0961 series or 70-C0954C for elongation measurements. It is also possible the connection to PC using our stressstrain software 70-S0010 obtaining the complete stressstrain graph conforming to EN ISO 6892.

Multi range with selectable or auto-ranging options - One tester measures from pure water to waste water! :: Large Display Screen - Displays mode, ATC, battery level and temperature. :: User-Replaceable Sensor - Replace the sensors yourself. Sensors lasts longer with element made of SS316 stainless steel and sensor casing made of VALOX® :: Adjustable TDS Factor - Select the appropriate TDS factor from 0.4 to 1.0 for more accurate measurements. :: Waterproof, Anti-roll Design - IP67 waterproof housing keeps tester good even under wet conditions. Unique anti-roll ribbed design ensures firm grip. :: Innovative Cup-style - Innovative sensor housing design can be used as dip-style or cup-style for holding small volume of samples. Sensor casing is made of VALOX® for superior chemical durability.

Controls rock mechanics automatic test systems are designed to test various materials from soft sandstone to high strength basaltic samples. The complete test system includes: Controls rock mechanics automatic test systems are designed to test various materials from soft sandstone to high strength basaltic samples. The complete test system includes: - Servohydraulic Control Console for load application conforming the relevant standards

Designed for making field classification of cohesive soils in terms of consistency, shear strength and approximate unconfined compressive strength.

Used for the measurement of surface friction properties, the apparatus is suitable for both site and laboratory applications and for Polished Stone Value tests using curved specimens from accelerated polishing tests.

Feature : New low friction release mechanism of the pendulum arm for better accuracy • Extremely light pointer for high precision results

This new digitally controlled large shear box is ideal for testing geosynthetics and also soils and other materials that contain large particles of up to 120 mm largest dimension. Sample sizes up to 300 mm square can be tested, with insert allowing the testing of 150 mm square samples. The shear box has two loading systems, one for consolidation and one for shear. The sample is consolidated via a hydraulic drive. This is powered by the Sercomp 7 Automatic Hydraulic Console with PID closed loop control and programmable consolidation load. The machine includes 100 kN load cell and linear potentiometric transducer 50, 25 and 10 mm travel complete with mounting brackets. The machine can be connected with the 30-WF6016 Geodatalog data acquisition unit.

Drives up to 4 test frames (not simultaneously) • Automatic test performance with PID closed loop control • Allows certification of correct test procedure saving and printing also the loadtime graph • Allows complex tests with various phases to be programmed by the user (e.g. for elastic modules determination) • Programmable load and stress rate • Programmable test cycles up to 100 different ramps • Unit selection: kN, kgf, lbf • Languages: English, French, Spanish, German, and Italian • Real time plot of stress vs. time • Real time download to PC via RS 232 port • Software calibration facilities and linearisation of up to 10 segments • Real time clock and date

Used to measure the rebound index on rock cores and samples. The apparatus is simple, easy to use, and is similar to the one used for testing concrete. The level of impact energy only is different: 0.74 Nm. Rock cores are positioned horizontally and the rebound index is obtained from the average of several measurements performed perpendicularly to the longitudinal axis. The unit is supplied complete with carrying case.

The time at which corrosion of steel may commence and the rate at which it may proceed is dependent upon properties of the cement paste and the permeability of the concrete. These meters measure the electrical resistance of the concrete which is directly related to the possible rate of corrosion embedded in it.

Large Display Screen - dual display LCD for enhanced readability, provides comprehensive meter information :: Waterproof, Dustproof Housing - IP67 rated, maintains the integrity of your tester even in harsh conditions. Plus it floats! :: User-Replaceable Sensor - reuse the same meter body many times :: Double Junction Sensor offers longer lasting usage :: Push-Button Calibration with Auto-Buffer Recognition - quick, easy calibration with no calibration mistakes :: Automatic Temperature Compensation (ATC) - ensures optimum accuracy under fluctuating temperatures :: Choice of USA or NIST pH buffer standards with up to 3 points :: Temperature Display Readout simultaneously :: Auto-Power Off saves battery power after non-use :: Hold Function freezes reading momentarily for easy viewing :: Self-Diagnostic for easy troubleshooting (e.g battery indicator, message codes) :: Enhanced power saving allows extended power consumption up to 500 hrs with single battery set

Large Display Screen - dual display LCD for enhanced readability, provides comprehensive meter information :: Waterproof, Dustproof Housing - IP67 rated, maintains the integrity of your tester even in harsh conditions. Plus it floats! :: User-Selectable Electrodes with BNC connectors - for greater flexibility with choice of electrodes for specific applications :: Push-Button Calibration with Auto-Buffer Recognition - quick, easy calibration with no calibration mistakes :: Choice of USA or NIST pH buffer standards with up to 3 points :: Auto-Power Off saves battery power after non-use :: Hold Function freezes reading momentarily for easy viewing :: Self-Diagnostic with message codes for easy troubleshooting

Large Display Screen - dual display LCD for enhanced readability, provides comprehensive meter information :: Waterproof, Dustproof Housing - IP67 rated, maintains the integrity of your tester even in harsh conditions. Plus it floats! :: User-Replaceable Sensor - reuse the same meter body many times :: Double Junction Sensor offers longer lasting usage :: Push-Button Calibration with Auto-Buffer Recognition - quick, easy calibration with no calibration mistakes :: Choice of USA or NIST pH buffer standards with up to 3 points :: Auto-Power Off saves battery power after non-use :: Hold Function freezes reading momentarily for easy viewing :: Self-Diagnostic for easy troubleshooting (e.g battery indicator, message codes) :: Enhanced power saving allows extended power consumption up to 500 hrs with single battery set

pH is one of the key parameters measured in food processing. The Eutech waterproof pH Spear with tough, spear tip open pore sensor is a rugged, user-friendly tester ideal for direct measurement of solid or semi-solid samples such as cheese, meats, fruits, bread and other similar samples. More importantly, the pH Spear is an easy-to-clean, fuss-free pH tester specially designed for the food professional. User-replaceable tough, open pore spear tip electrode.Unlike conventional pH electrodes, the durable glass tip electrode, enclosed in a resilient engineered plastic body is ideal for piercing solid or semi-solid food samples in direct measurement. Open pore reference junction minimizes clogging and delivers fast, stable measurements. Double junction sensor prolongs useful life of electrode with no contamination of samples. Maintenance is easy. Simply wash with mild detergent.

No need to change sensor every time you switch parameters – One tester measures five parameters (measures pH, Conductivity, TDS, Salinity and Temperature) :: Full pH range measurement at up to 2-decimal places. :: Low, medium and high Conductivity TDS ranges – tester measures pure water! :: Multi-range Salinity measurements of up to 10.00 ppt or 1.00 % :: Up to 5-point pH calibration and 3-point Conductivity TDS Salinity calibration. :: Adjustable TDS factor (0.40 to 1.00) and Temperature Coefficient Feature (0.0 to 10.0%) :: Temperature sensor housed within unique dome-shaped casing for faster ATC response and faster measurements. :: ATC MTC option

Semiautomatic Standard Model 5 Litres Cap. A robust mixer for the efficient mixing of cement mortars as required by the relevant specifications. A table mounted unit with planetary mixing action. The bowl and beater are easily fitted and removed from the mixer. Planetary Speeds: 62 and 125 r.p.m.

The soundness of cements and limes is determined using the expansion test with Le Chatelier moulds according to the relevant standard. The mould consists of a spring tensioned split cylinder 30 mm internal diameter x 30 mm high with two indicator stems, which measure 165 mm from the points to the centre line of the cylinder and O-ring. Two or three moulds are required for each test. We propose the single mould (code 62-L0025), a package of 6 units (code 62-L0025C) and a complete kit including 3 moulds, glass plates and accessories for the verification of extensibility (code 62-L0025B). Each mould is identified by a serial number and supplied with certificate of conformity

Rigid and stable structure, removable arms connecting the table to the pivot for quick checking of the weight of single parts, adjustable hammer fall height, control panel with digital counter programmable via a membrane keyboard.• Structure: Highly rigid painted steel Joints between main parts (table - arms - base) easily removable to check weights • Motor: Power 250 W • Digital control and cycle-counter panel: - r.p.m. 60 - 4-figure segment display

A large selection of Ion Selective Electrodes (ISE), USA make to suit a wide variety of applications is available. Each electrode has a typical response time of 20 to 30 seconds which varies with solution concentration.

The WF Hydrocon is supplied complete with three valves, one porous base disc and three top loading porous discs. The cell is manufactured from anodised light alloy and has three support legs for stability.

Used to obtain quickly and easily an approximate measure of the shear strength of cohesive and semi cohesive soils. The special feature of this model is the design of the penetration rod, which allows a relatively deep penetration into the soil (up to 6 cm) thus reducing errors and uncertainties typical of shallow measures, which are often affected by remoulding, drying, etc.Three different sizes of penetration tips are available: the small one for hard soils, the medium one for soft and medium soil, and the large one for soft soil.