Curing Machine Dealers

TECHNICAL SPECIFICATION  Produce high quality identical products. Easy to operate Convenient to use Economical Efficient

We are offering uv curing machine is engineered for low energy consumption.engineered for safe operation.with combination drying option uv curing ir drying hotair.

We can attach our UV curing with any make & size of offset machine. This gives an extra advantage to printer for printing with UV ink on existing offset machine. With the help of this PVC Lamination Board, Metalized, Lamination Paper & Boar PVC Sheet and other none absorbent material can be printed. This gives a high speed and a solid back ground print can be done easily. UV inks are eco friendly. They give more milage an extra shine.

We manufacture and supply UV Curing Machines for different applications, to be attached to offset machines as offline coaters. UV Curing Machines can have combination drying options of UV, IR and Hot Air. These UV Curing Machines are designed for higher efficiency and minimal maintenance. Our UV Curing Machines are preferred in the market because of their high quality and reliability. Attributes Robust construction Higher efficiency Low maintenance Easy installation

Coil Type Hot water Generator: Capacity: 500 Ltr Max. Temp.: 900C Width: 1200mm Hight: 2.5mtr Jacketed Fire box: 1200mm dai Wood consumption: 100 kg/ Hr. Coil Type Hot water Generator: Capacity: 1000 Ltr Max. Temp.: 900C Width: 1400mm Hight: 3.8mtr Jacketed Fire box: 1400mm dai Wood consumption: 200 kg/ Hr.

Open Width Polymeriser: Model: RESINEX All rollers from S.S. 192 mm Cloth content: Multiple of 42 MTRS Heating : SteamThermic fluidElectric Center to center distance of roll in Curing chamber : 1500 mm All inside parts of machine in contact with Hot air will be painted with Epoxy paint to withstand acidic atmosphere Fabric width : 1200 to 3200 mm Temp. Regulation : upto 0.5ºC across the machine Exit Combination with A frame winder, cooling cylinders, etc.

Product Code: EKE 355-1   24-Hour Cycle from time of mixing.Controlled 35ºC or 100ºC ± 2ºC Curing Temperature for Concrete.Controlled 27ºC ± 2ºC Curing Temperature for grey cement.   The tank has been designed to accommodate 150 mm/70.6 mm cube moulds upto 36/72 cube moulds and fully insulated, complete with a hinged lid, heater, thermostat and recirculation pump. Provision of two removable racks allowing free circulation of water around each mould is provided. The pump, drain valves and electrical equipment are housed in a compartment located at one end of the tank. The tank is heated by a immersion heater under normal conditions and refrigeration system. For grey cement, the temperature is controlled at 35ºC or 100ºC ± 2ºC/27ºC ± 2ºC, expect for the 15 minutes after immersion of the freshly-made specimens. EKE 355-1 Curing Tank for 6/1 2 moulds of 150 mm/ 70.6 mm sizeEKE 355-2 Curing Tank for 12/24 moulds of 150 mm/70.6 mm sizeEKE 355-3 Curing Tank for 24/48 moulds of 150 mm/70.6 mm sizeEKE 355-4 Curing Tank for 36/72 moulds of 150 mm/70.6 mm size Accelerated curing : For warmer water method, Temp. Range : 55 ± 2ºC EKE 355-1 ACW Accelerated curing Tank for 6 moulds of 150 mm size.EKE 355-2 ACW Accelerated curing Tank for 12 moulds of 150mm size.EKE 355-1 ACB Accelerated curing Tank for 6 moulds of 150 mm size.EKE 355-1 ACB Accelerated curing Tank for 12 moulds of 150mm size

Low Pile UV Application : Offset Belt Speed : 7-140 Mtrs. Min. Suction hold below belt. Lamp Power steps : 33 %, 66%, 100%. Power Source : 415 V, 50 Hz, 3-Phase+N+PE.

Impress infra red curing technology consumes extremely less electricity, Installed with the best infra red tubes with perfect control on temperature and evenness of heat, Curing machine with leading edge technology for Curing requirements of water base, plastisol, pigment and all types of inks, MAXCURE 900 comes to you with latest belt tracking mechanism for least swaying of the belt, Very high insulation offers excellent heat retention, Adjustable heating panel to feed very thick garments and jackets, Actual value twin digital temperature control with SSR for extremely precise temperature.

The fixation of dyes on fabric is made by a polymerization in hot air at 150ºC. We have improved the polymerization process on fabric moves in tension less condition, there is no rubbing and no length wise stretched on printed fabric. The machine is essentially built on a steel frame with insulation panels containing min wool. Inside the machine, centrifugal blowers are mounted this blowers sucks surrounding air and blow into the machine chamber. This blowing is done from the bottom, underneath the heaters. In this way the fresh air is first heated and then mixed with the circulation air.The eventual oil condenses or hydrocarbons, which develop during fixation, are removed through an exhaust fan partially and partially re-circulated air to air heat recovery within the chamber.The fabric transports on free loops, quantity of fabric contain from 50 meters to 250 meters and working fabric width available from 1250mm to 3650mm.Some special de-ionization bars are installed at the inlet and outlet to reduce the fabric electrification phenomena.The air heating can be reached with battery fed by thermic oil or may also be achieve by direct gas burner.The machine is usually equipped with electric control panel and on request it is possible to supply a logic programmer.