Control Panels Dealers in Pawane, Navi Mumbai

Instrumentation Control PanelInstrumentation Control PanelInstrumentation Control PanelInstrumentation Control PanelInstrumentation Control PanelInstrumentation Control PanelInstrumentation Control PanelInstrumentation Control PanelInstrumentation Control PanelInstrumentation Control PanelInstrumentation Control PanelInstrumentation Control PanelInstrumentation Control PanelInstrumentation Control PanelInstrumentation Control PanelInstrumentation Control PanelInstrumentation Control PanelInstrumentation Control PanelInstrumentation Control Panel

Supported by a well-organized network and dependable resources, we have developed as a reputed supplier of Flameproof Control Panel. Serialization is done before the final packaging and storing of the products in our capacious warehouse. We keep the products separated to ensure rapid delivery in the committed time span.   Specifications : Power Rating : Variable Phase : Single Phase / Three Phase Frequency : 50 Hz Material of Construction : Aluminum LM6 Type of Protection : Flameproof Ex'd. Zone classification : Zone 1 & Zone 2. Gas Group : IIA,IIB, T6. Fault Indication : LCD/LED. Dimensions : as per Requirement. Usage : Motor Control , Drive Control , Power Control.

• Power Source: Electric
• Frequency (Hz): 60Hz
• IP Rating: IP45
• Body Material: Mild Steel
• Capacity (KVA): 400
• Coating: Painted
• Phase Type: Three Phase
• Capacity (Amps): 110
• Temperature (deg. Celsius): 30 - 45
• Rated Voltage (V): 380 - 440
• Meter Type: Analog
• Mounting Type: Free Standing
• Maximum Relative Humidity: 85%
• Cable Entry: Bottom

Conventional Traditional fire alarm panels installed prior to 1998 were conventional zone panels. In a zoned system, fire alarm devices in a common area or floor of a facility are connected to the same alarm initiating circuit. Each zone requires its own circuit conductor. This arrangement allows alarm annunciation to be reported by areas of the building to identify which device is in alarm. Conventional panels are often used in small facilities where a few zones can provide sufficient alarm annunciation.  Addressable With the advent of microprocessors and digital electronics, addressable fire alarm control panels and devices have become more common than conventional systems for medium and large-sized facilities. They have become more cost effective in some small applications as well. Addressable fire alarm systems use digital encoding and multiplex technology to more accurately identify alarm locations and device conditions. Each fire alarm device in a system is programmed with a unique address. The fire alarm control panel is capable of communicating with a single address or a group of addresses depending on the functions required. The communication is often multiplexed over a common cable, sometimes referred to as the signaling line circuit (SLC). This arrangement significantly reduces the amount of cabling necessary to install the system. The communication channel allows two-way communication, thus enabling the fire alarm control panel to control as well as monitor fire alarm devices. A significant component of addressable fire alarm system is the software programming necessary to make the system function correctly. The programming allows for flexible applications where you want to have specific control over the inputs and outputs. The communication technologies employed in addressable systems allow for advanced features to accommodate sensitivity changes due to age and accumulation of dust prior to maintenance. These features are not available with the standard conventional system.   Fire Alarm Devices Automatic Detection Components of a fire consist of: Smoke (particulate and aerosol) Heat Light Radiation Fire detection devices are built to detect one or a combination of these components. While all components are necessary for a fire to exist, all components may not exist at a detectable threshold. Detectors will be selected that will detect the elements that may exist in a fire for the ambient conditions that are present. It also should be realized the similar non-fire components might exist in the same ambient conditions, which could cause unfavorable false alarm conditions. Devices used for fire detection include smoke detectors, thermal detectors, flame detectors, fire-gas detectors, and other devices. Smoke detectors sense visible or invisible particles of combustion generated by burning, smoldering, or the incipient stage of combustion. These devices fall into two categories -- photoelectric and ionization. Thermal detectors sense the high temperature or the temperature rise caused by a fire. Flame detectors sense the radiation produced by a fire. Fire-gas detectors sense the gases produced by a fire. Other detectors sense some phenomenon other than smoke, thermal, flame, or fire-gas to detect a fire. Smoke Detectors There are three types of smoke detectors: Ionization, photoelectric, and combination.   Ionization The ionization smoke detector is widely used. Its capability to detect smoke originating from fire is best utilized for clean-burning fires that produce small particles during combustion.   The ionization smoke detector consists of an alpha particle producing a radioactive source, a smoke chamber, and charged detector plates. The alpha source causes the air within the smoke chamber to become ionized and conductive As smoke particles enter the smoke chamber, the smoke particles attach themselves to the ionized air molecules and the air in the chamber becomes less conductive When the air conductivity within the chamber drops below a predetermined level, the alarm is triggered Advantages of Ionization Smoke Detectors: Detects invisible products of combustion -- It can detect fires that are in the incipient stage or detect other aerosol-type smoke products Quick acting -- Provides for earlier detection than other types of smoke detectors or thermal detectors

Lift Control Panel monitors the status of lift on LCD as well as record the faults. It is password protected so that only authorized person can change the parameters. Manual will be consisting of parameters list and instructions of programming. We share glorious credentials in the list of top Suppliers of Lift Control Panel from Maharashtra, India. Customers can place retail as well as bulk orders for Lift Control Panel with us.   Features : In case of mains failure, the lift stopped between two floors is moved to floor level, the automatic door is opened and passengers are out safely, for lifts with automatic door, in case of a mains failure at floor level, the door is remain opened. Optional Features  Powder Coated M.S. Cage Panel with a choice of Standard Colour Combination M.S. Car Ceiling with Painted White Stainless Steel Cage Wooden cabin with decorative laminates P.V.C. Flooring with a choice of Standard Colour Combination Chequered Plate Flooring (M.S. / Aluminium) False Ceiling with Concealed Lighting Pressure Fan with Aluminium Grill for proper Ventilation Aluminium / S.S Hand Rails Mirror on the Rear Panel

Networks panels & control is one of the prominent organization engaged in manufacturing and supplying a wide range of vfd panels in india.

It is Metal clad type & having type tested design suitable for PLC/SCADA/DCS system & remote operations along with fault annunciation for motor control & power control panel.

• Feature: Efficient Power Management.

Main L.T panels are considered the heart of the electrical supply system in any installed network of electrical distribution. The secondary side of transformer is connected to the incomer of the Main L.T Panel. Its main purpose is to distribute power efficiently to critical loads and other sub-distribution panels. Usually consists of circuit breakers, isolators and bus couplers. We design, manufacture and supply good quality Main L.T panels in accordance with customer’s specification and at reasonable price with the necessary safety requirements. They can be installed indoors outdoors of the plant or facilities and have exceptional ability to withstand different climatic condition.

Vacuum circuit breaker panel are extensively found applications in various gigantic complexes, shopping malls, very large commercial places for controlling various electrical equipments. These products are easy to install, easy to use, providing accurate reading and excellent functionality. We are service providers and maintain the highest levels of customer satisfaction by providing effective services to customer at uncompromising quality level.

A Fire Alarm Control Panel (FACP), or Fire Alarm Control Unit (FACU), is the controlling component of a Fire Alarm System. A fire alarm system is number of devices working together to detect and alert people through visual and audio appliances when smoke/fire is present. These alarms may be activated from smoke detectors, and heat detectors.

We have emerged as the leading manufacturer and supplier of premium quality LT Switchgear Panel. This LT Switchgear Panel is developed by the experts using optimum quality components and advanced technologies. Our offered product is rigorously tested by our quality controllers on various quality parameters in order to deliver flawless range at clients' end. This offered panel is can be availed by the customers in variegated specifications.

We offer Multichannel Control Panel. Gasmonitor is an expandable microprocessor-controlled 19 inch rack based gas and fire detection system which controls up to 16 channels per rack. Each channel has its own dedicated gas or fire detector input card controlling either one gas detector or two fire zones (monitoring up to 20 fire detectors per zone). Designed to meet the requirements of large installations which need centralised hazard monitoring and the ability to monitor at several alarm levels. Gasmonitor offers the ultimate in user-configuration through its microprocessor control and RS232 interface. A suitable IBM compatible PC and Crowcon's SetGmon software makes set up and configuration of Gasmonitor quick and easy. Once configured, routine daily adjustments can be made without fuss from the front control panel of Gasmonitor. And Gasmonitor is equally suited to new and retrofit applications, as it is compatible with the vast majority of gas and fire detectors - including infrared and optical types - currently in use.

• Size: 500 X 500
• MOQ: CRCA Sheet
• Usage: Indoor & outdoor Application

We design & manufacture all kind of Electronics panel

• Phase: Three Phase
• Material: Mild Steel
• Voltage: 220-440 V
• Finishing: Coated
• IP Rating: IP 44
• Frequency: 50-60 Hz

• Color: Brown, Grey, White, Blue
• Voltage: 110V, 220V
• Body Material: ABS, Mild Steel, PVC
• Phase: Double Phase, Single Phase, Three Phase

• Type: Electrical Panel
• Shape: Rectangle
• Certification: ISO 9001:2008
• Frequency: 50Hz, 60Hz
• Connection Type: 4 Way

We are the main supplier of this product.

With the support of our competent procurement teams, we source and export a quality range of Electrical Panels. Using advanced and modern technology, these panels are manufactured from high quality factor inputs under the supervision of our experienced team of professionals. To get maximum satisfactions of our clients, our offered panels are tested with all quality parameters of the international standards. These panels are highly useful to avoid short circuit or overload. Apart from this, our offered panels are widely appreciated for their excellent features like durability, sturdy construction and reliability. With the help of our professionals, Dewdry Industries is capable in offering an exclusive array of Dehumidifier Control Panel. Offered panels are designed & developed by the experts in complete compliance with the international quality standards. Apart from this, these panels are strongly constructed to prevent damages and all useless electrical defaults. Available with us in various designs, these panels are highly known for their durability and sturdy construction. We offer these panels at effective rates. Features: Excellent performance Durable Low power consumption

• FEATURES: Eight 5x7 DOT Matrix display, 5.0mm high character • Brightness display controlled by microprocessor • Customizable display data
• Weight (lbs): 3.3 lbs
• Operating Temperature (F): 131ºF to 158ºF

The refuel defuel control panel (RDCP) displays the fuel quantity for each tank, total on-board quantity, and warning status such as tank overfill. In addition, the RDCP is capable of automatic refuel, manual refuel, defuel, and transfer operations.

Backed by a team of experienced and skilled engineers, we are highly engaged manufacturer and supplier of SR Control Panel in Navi Mumbai, Maharashtra, India. Our offered control panel can be availed in various options of option of 3 channels & 6 channels, 30A, 60A, 100A. This control panel is designed with top grade material by our skilled workforce as per the industry defined norms. Also, we offer thermocouple attachment unit, chart recorder on customer�s demand. Item Code: MF-SR Features: Rigid construction Long service life

plc automation, Induction Lights, Electronic Products, Socket

Touch Panel Light Switch, RFID Key Card, Luggage Rack

aluminum Powder coated frame, and MR gypsum board, which can be painted / replaced with laminated boards.

Solar panels generate free power from the sun by converting sunlight to electricity with no moving parts, zero emissions, and no maintenance. PV modules are made of mono/poly-crystalline silicon cells.The solar panel, the first component of a electric solar power system, is a collection of individual silicon cells that generate electricity from sunlight.  

Electrical Instruments

We deals in supplying of wide range of Remote Control Panels.

We are engaged in manufacturing and supplying of automatic semaphore indicator