HTC Instrument Turbhe, Navi Mumbai, Maharashtra

4 Digits, 18mm LCD Display   Auto Power OFF   Max. Hold   Measure Accelerator / Velocity / Displacement with RPM & Frequency   Metric / Imperial Measurement   Low Battery Indicator   AC output socket for headphones and recording   Optional Headphones for use as electronic stethoscope   Optional RS-232 Communication(Advanced Software Program for all windows)

3½ Digit LCD Display   2000 Counts   Data Hold Function   Auto Rnge   Measuring forward voltage, reverse voltage,forward satuaration voltage drop, amplification factor, reverse leakage current of various crystal diode, audios,sillicon controlled rectifier(SCR), field effect transister(FET)   Measuring rated working voltage of chemical capacitor, ethylene capacitor,a capacitor,leaded multilayer ceramic capacitor ,high voltage locker.   Measuring protection voltage of of varistor.   Measuring starting voltage of neon bulb,neon lamp   Measuring constant voltage value of 78,79 series three-pole circuit.

Temperature Range : -50°C ~ 70°C (-58°F ~ 158°CF) Temp. Accuracy : +0.5°C (0°C ~ 40°C) or +1% Humidity Range : 10% ~ 99% RH Humidity Accuracy : +3% RH (50% ~ 80%)or +5% Battery: AAA 1.5V. Time / Temp / Humidity indicate. Temp. Reading for °F & °C. MAX and MIN Temperature and Humidity Memory. Calendar with Alarm Clock.

Digit 10mm LCD Display   Ranges: H,M,L(High, Medium, Low)   Flash Adjust:Coarse adjustment, Fine adjustment X2 and ÷2 for fast Check   Triggering Mode: Interior/Exterior

10mm (0.4”) LCD Display   Auto Manual Shutdown   Low Battery indicator   DC Output : 0 ~ 1.3V 10mV/db   ‘A’, ‘C’ or ‘Flat’ Weighing with Slow / Fast response   94db in full Callibration at (1KHz)   Optional RS-232 Communication (Advances Software Program for all Windows) Alarm Volume o/p : 30 ~ 130db Alarm o/p : LED Optional Relay Output   Backlight

Memory for 32,700 readings,LCD to show logging information easily,Free selectable measurement cycle from 1sec to 24hrs,Battery life: more than 3 years (Under Ideal condition at 22oC),Display all status for Alarm and Record through 2 LED’s,Alarm display if user-defined maxmin values are exceeded,Analysis software used to view graphically or Text mode for logging data,USB Computer Interface (Advanced Software Program for all windows)

15 Min. Auto SHUT OFF   133 MM. Stainless steel sensor probe   Temperature Unit ˚F/˚C Selectable   Data Hold   1Sec. Normal Temperature Sensing Time   Protective Plastic Sleeve with Clip for stainless steel   Low Battery Indicator

Accuracy : ±1˚C(±2˚F)

Digital-code sweep switch   Height Y Sensitivity   Power Supply : AC 200 ±10%V Band Width             :    DC ~ 10MHz (3db)   Y Deflection            :    10mV / div ~ 5V / div 1-2-5 step ±5%   Sweep Rate             :    200ms/ div-0.5us / div 1-2-3 step±5%   Trig Source              :    Int., Ext.   X Sensitivity            :    0.5V / div, ±5%,MAG 0.1V/div, ±10%   Trig Mode               :    Int. ≥ 1div ,Ext. ≥0.5Vp-p   Wave                       :    Rectangle   Amplitude                :    0.5V ±2%       Frequency               :    1kHz ±3%

3 ½ Digits LCD Display     1999 Counts   Backlight   Data Hold   Auto Ranging   3 in 1 Insulation Resistance, Phase Testing & Voltage Testing

°C or  °F Selection   Laser Target Pointer Selection   Automatic Data Hold Function   Auto Power Off   Adjustable Emissivity

Temperature Range : -50°C to 550°C (-58°F to 1022°F)

Accuracy : -50°C

5 digit LED display ( including 3 digits for voltage)   Frequency and amplitude display simultaneously   Output waveforms: sine wave, square wave and triangle wave   Frequency of output signal: 0.2Hz ~ 2MHz   Duty cycle adjustable: 20% ~ 80%   Width of output signal adjustable continuously   Amplitude without attenuation: 0.9V ~ 10V   Amplitude with -20dB attenuation; 100mV ~ 1V   Amplitude with -40dB attenuation: 10mV ~100mV

Rated Power : AC 110/220V

3 ¾  Digits LCD   RF Three Axis Field Strength Meter 50Mhz to 3.5Ghz  

10mm (0.4”) LCD Display,Auto Manual Shutdown,Low Battery indicator,DC Output : 0 ~ 1.3V 10mVdb,‘A’, ‘C’ or ‘Flat’ Weighing with Slow Fast response,94db in full Callibration at (1KHz),Optional RS-232 Communication,Alarm Volume op : 30 ~ 130db,Alarm op : LED Optional Relay Output,Backlight

Altitude history & Graphical Display of the last 12 hour altitude readings.   Total Altitude Gain & Loss   Max./ Min. memory for Altimeter and Barometer Pressure   Barometer Pressure History & Graphical Display   Electronic barometer Weather Forecast ( Sunny, Slightly Cloudy, Cloudy, Small Rain, Large Rain)   Pressure Trend Indicators   Perpetual Calendar with day of week   12/24 hour selectable   Low battery indication

Line Regulation : ≤0.01% +3mV   Load Regulation : ≤0.001% +3mV   Ripple and noise : ≤1mV rms   Protection : Constant current and Short-circuit protection   Indication Accuracy : ≤0.5% +1digit   Input Voltage : 220 V AC ± 10%, 50Hz ± 2Hz

1.5 Meter Cable with RS – 232 Socket & 5mm Jack for AVM-07 & VB-8205 1.5 Meter Cable with RS – 232 Socket & 3.5mm Jack for SL-1352

3½ Digits LCD Display   Clamp Max Saw size : 35 mm   Full function protection ,anti high voltage circuit design   Data Hold   Low Battery Indication   Max. measuring capacitance

Used for ambient temperature, humidity, dew point temperature, wet bulb temperature, wind speed, and air volume. Large-screen LCD and backlight Data Hold Auto Power OFF USB real time data uploading functions.

Analog Multimeter with Mirror Scale   Inbuilt Buzzer and LED   0W Adjustable with x 100 Range   Transistor Test ,hFE with Diode

10uA high Resolution   Large 3 3/4 ( 4000 counts ) LCD Display   Auto Power OFF   Shielded transformer jaw opens to 1.2"   Max/Min, Data hold, Low Battery indication   Overload Protection

Operational Voltage: 60 ~ 600V (3 Phase AC) Limit Support Voltage: 2000V/minutes (impulse voltage 4000V)  Measuring Frequency Range: 20Hz ~ 400Hz  Time Limit for Continious Measurement: Less than 60 minutes at 200V AC   Less than 4 minutes at 600V AC