Electronic Test Instruments Dealers in Navi Mumbai

We are offering microprocessor ph meter. Features- 16×2 alphanumeric lcd display ph,ec,tds & temp.measurements. auto buffer recognition in ph mode. auto temp. Compensation. auto ranging facility in ec mode. programmable ref.temp. & temp.coefficient ec mode. 90 sample storage facility printer attachment facility. Technical data:- parameter ph mv temperature range 0 - 14.00 ph 0 - ± 1999.9 mv 0 - 100 oc resolution 0.01 ph 0.1 mv 0.1 oc accuracy ±0.01 ph, ±1 digit ±0.001 ph, ±1 digit ± 0.1 mv, ± 1 digit ± 0.1 oc temperature compensation 0 - 100 oc automanual auto buffer recognition 4.00, 7.00 and 9.20 ph display 16 x 2 line alphanumeric lcd with backlit keyboard 8 keys, soft touch membrane type printer interface centronics interface for any dot matrix printer storage upto 90 samples power 230 v ± 10% ac, 50 hz dimensions (l x b x h) instrument: 285 x 190 x 90 mm (approx.) packing box: 335 x 305 x 265 mm (approx.) weight instrument: 2.5 kg (approx.) accessories combination ph electrode, temperature probe, ph electrode stand, buffer tablets (7.0 and 4.0 ph), operation manual and dust cover.

Contech, Multiparameter Meter is the perfect combination of advanced Electro chemical sensor technology with state of the art electronics and software design. This instrument can measure several parameters, like pH, mV, Conductivity TDS, Salinity, Resistivity, Dissolved oxygen & temperature using different electrodes. Large scale integration of circuit using surface mounted components and dedicated backlite LCD with display of various measuring parameter units for different parameters being measured has enabled to use this compact instrument for the measurement of multiple parameters without any ambiguity. This instrument is very useful where all parameters need to be measured like in the field of environmental protection, water quality checking, disease control, biological agriculture, aqua culture & scientific research.   Multiparameter Meter pH, mv, ms ,µs, mg/L, ppt, %, ppm,oC FOR WATER QUALITY ANALYSIS - CMPM-01 Features* pH , mV, Conductivity, Resistivity, TDS, Salinity, DO, Temperature modes. * Automatic or Manual temperature Compensation.* 3 point pH calibration.* Buffers selectable from 1.68pH, 4.00pH, 4.01pH, 6.86pH, 7.00pH, 9.18pH, 9.20pH. 10.01pH and 12.45pH.* Automatic buffer recognition. * 1 point conductivity calibration for the entire range. * Dissolved oxygen electrode with the salinity measurement feature to achieve automatic salinity & temperature compensation. * Automatic air pressure compensation for DO with the help of air pressure sensor. * Polarographic type DO electrode offers short polarization time, quick response and precise measurements. * Bi directional RS232 interface. Baud rate selectable from 1200,2400,4800 and 9600. * Single and continuous print out of measuring parameters. * Multiple Printout types. Combinations selectable from Sr. No., pH, mV, conductivity, TDS, Salinity, DO, Date, time and temperature..* Real Time Clock.* Calibration report as per GLP requirements. * Electrode Slope and mV offset display.* LCD display with Backlight. * Memory storage of 100 measurements. * Data logging facility up to 500 results. Data logging interval selectable from 5S, 10S, 20S, 30S, 1M, 2M and 5M. * Temperature calibration with respect to solution of known temperature. Magnetic Stirrer : CMS - 01 Optional For Proper Performance Of DO Meter, Magnetic Stirrer Is Must   * Power : 9V/ 500 mA External adaptor or battery backup unit (Optional)* Operating Temperature : 15~45°C * Meter Dimensions (mm) : 165 (L) x 190 (D) x 60 (H) * Meter Weight : 700 g  Optional Accessories :Magnetic Stirrer MS-01,Battery backup unit BBEC-01Calibration Standards

Features PROCESS, VOLTAGE, CURRENT, TEMPERATURE, AND STRAIN GAGE INPUTS 5-DIGIT 0.56" RED SUNLIGHT READABLE DISPLAY VARIABLE INTENSITY DISPLAY 16 POINT SCALING FOR NON-LINEAR PROCESSES PROGRAMMABLE FUNCTION KEYS/USER INPUTS 9 DIGIT TOTALIZER (INTEGRATOR) WITH BATCHING OPTIONAL CUSTOM UNITS OVERLAY W/BACKLIGHT FOUR SETPOINT ALARM OUTPUTS (W/OPTION CARD) COMMUNICATION AND BUS CAPABILITIES (W/OPTION CARD) RETRANSMITTED ANALOG OUTPUT (W/OPTION CARD) CRIMSON® PROGRAMMING SOFTWARE NEMA 4X/IP65 SEALED FRONT BEZEL

We are offering battery tester. Meco battery capacity tester bt 63 is designed to check capacity condition of different types of battery ranging from 4 ah to 500 ah and having 2, 6 and 12 v dc batteries. Meter dial has 3 different colors for 2, 6 and 12 v dc. The battery tester bt 63 gives results in 3 seconds. the battery capacity tester bt 63 is ideal for the industries such as battery industry, ups industry, automobile industry, solar system industry, wind energy solution providers and crane and fork lift industry and many other industries where batteries are used. For manufacturers, service centers, technicians, dealers and service executives of these industries meco battery capacity tester bt63 provides unique solution to check capacity of battery instantaneously. As the battery tester bt 63 is designed by considering the problems faced by people on the field in these industries while caring, handling and using the testers for checking batteries available in the market today. The battery tester bt 63 is available in indian market through our authorized dealer network. technical specifications :- rated voltage of battery to be tested : 2, 6, 12v dc rated capacity of battery to be tested : 4 - 500ah dimensions : 220 x 120 x 70mm (approx.) weight : 560gms (approx.)

10mm (0.4”) LCD Display,Auto Manual Shutdown,Low Battery indicator,DC Output : 0 ~ 1.3V 10mVdb,‘A’, ‘C’ or ‘Flat’ Weighing with Slow Fast response,94db in full Callibration at (1KHz),Optional RS-232 Communication,Alarm Volume op : 30 ~ 130db,Alarm op : LED Optional Relay Output,Backlight

We introduce you to a superior range of Digital Conductivity Meter, which is widely appreciated by our clients worldwide. We have taken the lead in providing the best possible quality of Digital Conductivity Meter available in the market. Our affordable range of Digital Conductivity Meter is extensively used for diverse applications. Technical Details 2½ digit LED display with facility for automatic temperature compensation Digital cell constant adjustment Measuring Cell : Platinum DIP type Conductivity cell Temperature probe Range 0 to 200 S/cm, 0 to 2m µ S/cm, 0 to 20m S/cm, 0 to 200m S/cm, 0 to 1000 m S/cm Variants of Digital Conductivity Meter Microprocessor based Conductivity / TDS Meter Digital TDS Meter Digital salinity Meter                                

CLAMP METER In electrical and electronic engineering, a current clamp or current probe is an electrical device having two jaws which open to allow clamping around an electrical conductor Insulation Tester.

  Central Heater - suitable capacity, with 100 mm dia. sandwiched between two copper plates 180 mm mica heater Sandwiched between two copper plates Cooing chamber with water circu ation arrangement. Specimen -6 to 20 mm thick, 180 dia. Glass wool bag insulation around the set-up A Control Panel comprising of-al Voltmeter - 0 - 200 Volts

The equipment is semiconductor aging testing equipment to full-automatically execute burn-in processing and data measurementjudgmentanalytical processing and also has tester function as well as temperature accelerating testing.

Features: State of Art Micro controller Based Design. 1 Line 4 Digit ultra bright LED display Site Programmable CT & PT Ratio. True RMS measurement. Total harmonic measurement for voltage  Auto ranging  Universal Auxiliary supply Adwantages: Cost - effective  Accurate reading  Long life compared to Analog, as no moving parts  Reduce Panel space, wiring and installation time  Precise onsite display  Applications: Industrial application and Automation Control Panel  Equipment Monitoring Distribution Systems  Test bench 

Serial Data Logger is an easy to add data storage to any device or system. The SDL-01 is a compact, rugged device that captures data from any device equipped with a serial port and stores it in FAT16 to FAT32 compatible files on a Secure Digital card. It also has an USB port with standard Mass storage driver, which can emulate the device as USB pen drive, for retrieving the files. Features: • Low-power consumption • Low-cost • Built in RTC • Standalone unit • USB Mass storage Port • Industrial real-time export capabilities. • Support text, raw, binary data and protocols • Use any baud rate, number of data bits or stop bits, parity, hardware and software flow control. • Programming is not required to configure the software to collect data.

Gloss meter Supplier in India We are complicatedly engaged in offering a commendable range of Gloss Meter. Besides being manufactured from high-grade raw material and latest technology, the offered chamber is inspected properly by our expert professionals. Owing to features like durability and sturdiness, the offered range is exceptionally valued by our precious clients. The offered chamber is available with us in various sizes and shapes at affordable price.