Electronic Test Instruments Dealers

This Kelvin Bridge has been designed for use of cable and wire manufactures whose products are called upon to meet very close specification in resistance per unit length. It is compact robust and simple in operation, yet enable measurements to be carried out with highest attainable precision Standard resistance and side wire are made of covered wire and properly aged. The maximum permissible current 10 amps. All coils are calibrated on Imported Testing Bridge.

Features : * Two Simultaneous Sampling Channels At 20 Ms/ S * Combination Of A True Dso And An Analog Oscilloscope One Touch Change Over. * 2 Kilo Words Of Memory Storage/Channel * Crt Readout And Cursors For Voltage Time And Frequency Measurement * Direct Print Out Of Screen Display Using Hpgl Commands With Rs-232 Interface. * Ruggedised Environment Endurance. * 1mv/Div Sensitivity. * Two Input Channels, Algebraic Add And Subtract With Ch2 Invt. * A Sweep * B Sweep ( Delayed Sweep ), Triggered. * X-Y Operation * Read Out / Cursor * Menu Selection , Data Acquisition For Probe Factor, Smooth On/Off * Pre-Trigger Observation * Single Sweep Operation ( Storage Band Width 5 Mhz ) * X2 To X10 Horizontal Expansion In Digital Mode * Temporary Holding Wave Forms Displayed * Storing And Recalling A Reference Memory * Scale Illumination * Continuous Variable Hold-Off * Z- Axis Input * Large Inch Crt With Internal Graticule * Tv-V,Tv-H Triggering * Calibrator Out Put For Probe Adjustment Also Available : 10 Mhz Single Trace Oscilloscope. 25 Mhz Dual Trace Oscilloscope. 30 Mhz Dual Trace Oscilloscope. 60 Mhz Dual Trace Oscilloscope. 40 Mhz Dual Trace Triggered Oscilloscope. 60 Mhz Dual Trace Triggered Oscilloscope. 100 Mhz 2 Channel , 6 Trace Oscilloscope. 100 Mhz 4 Channel , 8 Trace Oscilloscope. .

DESCRIPTION The pH of the water in your tank mix can sometimes affect the efficacy of pesticides. Insecticides, in particular, have a tendency to break down (hydrolyse) rapidly in alkaline water. Water pH can vary, depending on the source, from 5.0 to 9.5. Neutral water has a pH of 7.0, while alkaline water is higher than 7.0. If your water pH is much higher than 8.0, you may want to consider using an acidifying agent such as vinegar to lower the pH in the tank. Many of the pH-sensitive pesticides have acidifying agents in the formulation that moderate the effect of alkaline water. However, growers who suspect a pH problem should have their water tested. This can be done on the farm with pH-meter. For measuring: just insert the pH electrode in the water.

Description Portable Digital LuxmeterRange 0 to 400000 luxMeasures both interior and exterior illumination.

8-40% ± 0.2% 3 digit LED 45x33x22 cms 24 Kg. app. 9VDC (6 dry cell R type) or 230 VCA 50 Hz through main Authomatic Low Battery Indication. No need of Code Selection Display of all error conditions. Communication with printerPC (Optional) Strictly manufactured according to F.C.I. Norms and Guidlines.

We are offering digital luxmeter. Lux meters are designed for light intensity comparison of systems already installed. The lux meters can be used for fast, easy measurement of light intensity at work places.