Electronic Test Instruments Dealers in Sangli

• Accuracy: Class1 (±1digit).
• Frequency: 50Hz ± 5%.
• Auxiliary Supply: 230Vac ± 10%.

Friendly user interface. Easy to install. SYCON 9920 available with single input current SYCON 9923 available with three input current (For phase input current)

FEATURES : 1. Sphere in Sphere arrangement fo radial undirectional heat flow.2. Ten thermocouples to measure surface temperatures of spheres.3. Digital Temperature Iindicator.4. Illustrative Instruction Manual. DESCRIPTION : Insulating powder apparatus is designed to determine the thermal conductivity of insulating powerders. The apparatus consists of two thin walled concentric copper spheres. Inner sphere houses nichrome hetaing coil. Insulating powder is filled between the spherres. Heat flows radially outwards. Surface temperature of sprehers & heat input are measured by panelised instruments. SPECIFICATION :1)  Inner sphere dia - 100mm.2)  Outer sphere dia-200mm3)  Heater-Nichrome wire sandwithched between mica sheets.4)  Control Panel comprisising of a)  Voltmeter : 0 - 100 / 200 voltsb)  Ammeter : 0 - 2 Ac)  Dimmerstat : 0 - 2 Ad)  Digital Temperature Indicator, 0-300-0C with 10 Leastcount using chromel alumel thermocouples. Provided with cold junction compensation.  EXPERIMENTATION :1)  Determination of thermal conductivity of Insulating powder2)  Comparison of thermal Dconductivities at various temperatures. SERVICE REQUIRED :1)  A.C. 230 V single phase stabilised supply with earthig connection2)  Floor of 0.75 m x 1.5m at working height. Almost  care is taken for preparing this literature, but still if there are any mistakes,  those may be excused.  We reserve our right to change or modify the equipement without notice.

We are Manufacturer and Supplier of Portable Hardness Tester D-2, which is an advanced Hardness Tester, distinguished by its high accuracy, wide measuring range, simplicity of operations and high portability. The Portable Hardness Tester is operating on three pencil cells of size AA. Our Portable Hardness Tester is suitable for testing the hardness of many materials & finds applications for hardness testing in many industries. Measuring Method : The measuring principle is based on absorption of kinetic energy & its relation in conventional scales of hardness. This is achieved with help of the probe, wherein a small body with a hard tip is propelled against the test surface by a spring and latch arrangement. The motion of body is the measure of its kinetic energy. The instrument converts the signal of absorbed energy into a chosen scale of conventional hardness. Applications : In-situ hardness testing of individual parts or components in assembled machine.Hardness testing of mould surface of a die.Hardness testing of heavy components, like rolls of rolling mill or Sugar or Paper industry.Hardness testing of heavy pressure vessels.Hardness testing of production line of components like crank shafts, cylinder blocks.Checking hardness of material in stock.Hardness testing when required in failure analysis. Functions Available On The Display Of Indicating Instrument Of The Portable Hardness Tester : Display of hardness in various conventional scales of hardness as given in chart below for the standard probe.The instrument has compensation for the angle of probe with respect to vertical, while testing.Immediate conversion between available conventional scales of hardness.Standard deviation & average results up to nine readings can be taken.The readings can be recorded & recalled for later viewing. The max capacity being 500 readings. The readings are stored serially & the serial number being displayed. There is a batch number facility to distinguish from batch to batch. The entire batch readings can be cleared or the batch number can be reset using the specific keys.The machine calibration can be done using the keyboard & there is no need of any expertise to recalibrate the machine.Serial port (RS 232) or printer port (Centronics Compatible) is available on request. At extra cost. Technical Specifications :Overall Dimensions of the Indicating Instrument : 150mm. long, 70mm. wide, 50mm. high approx.Weight Of The Instrument : 500 Grams approx.Operating Temperature : 15 degree to 45 degree centigrade approx.(Type Test report available)Measuring Accuracy : Mean uncertainty +/- 2.0 % (corresponding to +/- 1.6 HRC at 58 HRC) on standard test block. Or +/- 10 BHN on brinell test block.Operates on three dry pencil cells of size AA.

• Number Of Flower: Analog Meter
• Material: Aluminium
• Shape: Circular, Rectangular
• Application: Household, Industrial
• Feature: Durable, High Accuracy
• Country of Origin: 110V
• Condition: New Used
• Display Type: Analog
• Rated Power: 100W, 200W
• Power Source: Battery, Electric
• Total Carbohydrate: 1Years

Range of Experiments to be Carried Out• To determine the thermal conductivity of the Insulating Material• The experiments can be conducted at various values of input & calculation can be made accordingly• To plot Heat flux Vs thermal conductivity of Insulating Powder  

• Number Of Flower: Automatic
• Certification: CE Certified
• Application: Temperature Monitoring
• Country of Origin: 240V
• Display Type: Digital
• Power: 10W
• Driven Type: Electric
• Warranty: 1 Year

We are a Maharashtra-based company in Sangli. We manufacture and supply Schneider electric monitoring system in India and abroad. It has the parameters like volts, amp, w/va, and f & pf. The electric monitoring system is user programmable and available in different price range as per the requirement of the client. Our engineers design the structure and circuit of the machine that captures the right reading of the load and its percentage.

We are offering multifunction meter 'p' model. General features friendly user interface. easy to install. rs-485 modbus communication available display features p-n voltage of each phase p-p voltage of each phase current of each phase frequency pf (ryb) kw (ryb) kw (total) kva (ryb) kva (total) kvar (ryb) kvar (total) kwh (total) electrical specifications voltage input 230 vac ± 15% current input 5 a frequency 50hz low current 1% (50ma) accuracy class 1 class 0.5 (optional).

Design concept is according to Indian Standard (IS : 3346-1966). The dimensions are not exact as per standard.. • Complete panelized electrical controls and measurement. • Digital Voltmeter, Ammeter & Temperature Indicator. • Determination of thermal conductivity of insulating material in the form of slab. • Study of variation of Thermal Conductivity of the material with temperature. • Comparison of Thermal Conductivities of various insulating material. Space Required : 1m. x 1m.

• Input Voltage: 230 VAC / 500 VAC
• Auxilliary Supply: 230 VAC +/- 10 %
• Accuracy: +/-1 %
• Resolution: 1 Volt
• Enclosure: ABS Plastic
• Size: 48 X 96 X 110 mm
• Panel Cutout: 46 X 92 mm

We are the one stop destination in market for availing 3 PH VAF Digital Power Meter. 3 PH VAF Digital Power Meter, offered by us, is highly appreciated for its reliability and perfection. Clients can avail precision engineered 3 PH VAF Digital Power Meter from us at reasonable prices.

• Country of Origin: 230 VAC +- 10%
• Availability: 700 gm
• Accuracy: Class +-1 digit
• Display: Digital
• Dimension: 96(L) x 96(W) x 60(D) mm
• Accuracy Class: Class +-1 digit
• Model Name/Number: SYCON-9990
• Input Current: 5 A
• Operating Frequency: 50Hz+- 5%
• Low Current: 1% (50mA)
• Panel Cutout: 91 X 91 mm

We are instrumental in supplying a comprehensive range of Thermal Conductivity Apparatus (GHP) (TLF004). Thermal Conductivity Apparatus, offered by us, is designed according to the international standards. Thermal Conductivity Apparatus is highly appreciated for its high performance, easy installation, low running cost and ability to withstand adverse conditions. Features : Determination of Thermal Conductivity of Insulating material in the form of Slab Variation of Thermal Conductivity of the material with Temperature Comparison of Thermal Conductivity of various Insulating material Complete Panelized Electrical Controls & Measurement Digital Temperature Indicator

THERMAL CONDUCTIVITY OF LIQUIDS BY GUARDED HOT PLATE, MEASUREMENT OF THERMAL CONDUCTIVITY OF INSULATION MATERIAL IN SLAB FORM GUARDED HOT PLATE METHOD.We also manufacture the equipments and control systems for sugar industries mainly mill automation, boiler instrumentation, prd stations and embibition water control system.

Gennext manufactures wide range of electrical meters that includes Digital Voltmeter, Digital Ammeter, VIF / VAF Meter, KWH Meter and Multifunction Meter.   FEATURES Microcontroller based design. Measures 3 phase Line and phase voltage. Auto scroll display. Also measures Kilovolt range. Settable PT ratio. KEYS To enter the CT ratio adjustment and set the CT ratio.   TECHNICAL SPECIFICATIONS Overall dimensions 96×96×75. Cutout dimensions 92×92. PT ratio settable range is 1 to 5000. Four digit one line 7 segment display. Supply voltage 230Vac, 50Hz (±10% Line regulation). Sensing Voltage R, Y, B -500Vmax. System accuracy is ±0.5%.

• Brand Name: Kanaad
• Display Type: Digital
• Grade: Semi-Automatic
• Frequency: 50 Hz
• Phase: Single
• Max current: 600A
• Minimum Order Quantity: 1 Piece

• Brand Name: Kannad
• Number Of Flower: Digital
• Usage/Application: Motorcycle
• Rated Voltage: 12 Volt
• Warranty: 1 Year
• Weight: 1.2 Kg
• Dimension: 235 x 135 x 75 mmH x W x D
• Model Name: Moto Tester
• Portable: Yes

• Brand Name: Samsonic
• Model Name/Number: 2k Gauss
• Object To Detect: To Detect Magnet
• Unit Of Measurement: Gauss
• Accuracy: +-2% of Total Range
• Display: 3 1/2 Digital LCD
• Battery: 1 (9V)

INTRODUCTION : National Instruments is one of leading manufacturer & exporter of Digital Moisture Meter since 1991. The company has supplied various models to the Laboratories, Exporters' surveyors, Government & semi government organization, oil industries, Solvent plants, Rice industries, Flourmills; Poultry feed factories, Seed industries, Poultry farms, Traders, Exporters, wholesalers, Brokers & commission agents etc. and to many others also. The company is known for providing excellent after sales service. National Digital Moisture Meter is the most reliable, compact, light weighted, rugged & sophisticated instruments available in the market to provide you long hours of services & trouble free operation. WORKING PRINCIPLE: National Digital Moisture Meter is an impedance type working on principle of measurement of Dielectric constant of the material. TECHANICAL SPECIFICATIONS: National Moisture Meter confirms to IS-8824-part-I-1978 National Moisture Meter is calibrated and tested as per IS Measuring range: 0% to 40% moisture Sensitivity: +/- 0.1% Accuracy: +/- 0.2% Power consumption: 0.03 watts approximately. Power requirement: Four pencil cells Samples size: 250 C.C. approximately. Size of meter: 125 mm H X 150 mm W X 210 mm D (approximately) Weight of the meter: Less than one Kilogram Measurement time: one sample per minute MODELS AVAILABLE: DMM1 : Single switch model contain calibration/ setting of ONE item. DMM2: Two switches model contain calibration / setting of TWO items. DMM3: Three switches model contain calibration / setting of THREE items. DMM4: Four switches model contain calibration / setting of FOUR items. DMM5: Five switches model contain calibration / setting of FIVE items. DMM6: Six switches model contain calibration / setting of SIX items. DMM7: Seven switches model contain calibration / setting of SEVEN items. DMM8: Eight switches model contain calibration / setting of EIGHT items. HOW TO MEASURE % MOISTURE: Pour specified quantity/size of material sample into Moisture Meter with help of hopper. Press appropriate switch to read % MOISTURE on the display. Inbuilt temperature calculator is provided to display the reading after temperature compensation. SALIENT FEATURES: Automatic inbuilt temperature compensation provided. “LOBAT” / “BAT” indication on display if pencil cells are weak/down. ABS Molded body for rugged used in field & for longer life. No mechanical moving parts hence no wear & tear and maintenance free operation for long duration. Non-destructive sample testing. CALIBRATION OF FOLLOWING ITEMS ARE AVAILABLE: 1. OIL SEEDS: Groundnut seed, Mustard seed, Rape seed, Sarson seed, Toria seed, Natural Till/ Sesamum / Gingly seed, Hulled Till / Sesamum / Gingly seed, Ram Till seed, Soya beans seed, Sunflower seed, Safflower / Kardi seed, Neem seed, Castor seed, Niger seed, Ambadi seed, Lin seed, Lahi seed, Mahuva seed, Guli seed, Dolomi seed, Cotton / Binola / Sarki seed, Copra/ Coconut, karanja seed etc. 2. GRAINS: wheat, Raw Rice, Par-boiled Rice, Jowar, Bajra, Maize, Paddy, Barley, Ragi, Jav, Rajma etc. 3. PULSES- WHOLE AND DALS (SPLITS): Green Gram/ Moong, Red Gram /Toor / Tuvar / Arhar, Black Gram / Udad / Urad, Moth, Horse Gram / Bengal Gram / Chana, Masoor / Lentil, Batari, Tevada, Peas / Cow peas, Wal, Green Gram / Moong dal, Red Gram/Toor/Tuvar/Arhar dal, Black/ Udad / Urad dal, Horse gram / Bengal gram / Chana dal, Masoor/Lentil dal, Batari dal, Tevada dal, Peas / Cow peas dal, Dhana dal etc. 4. SPICES WHOLE: Black pepper, Coriander / Dhana seed, Fennel/ Variali seed, Fenugreek / Methi seed, Celery / Jeera seed, Chillies, Cardamom/ Eliachy, Ajma seed, Dry Gingger, Cashew Kernels, Coffee seed, Cloves, Almond / Badam, Kismis / Dry grapes, Khaskhas etc. 5. VEGETABLE SEEDS: Bhindi / Lady Fingers, Jute seed, Onion seeds, Chilly seed, Ridge Guard seed, Ash Guard seed, Bitter Guard / Karela seed, Bottle Guard seed, Snake Guard / Turia seed, Cucumber seed, Brinjal seed, Tomato seed, Cluster beans, Water melon seed etc. 6. OIL SEED CAKES: Groundnut cake, Sunflower cake, Mustard Kachhi cake, Mustard pakki cake, Neem seed cake, Safflower cake, Till seed cake, Mahuva cake, Castor cake, Cotton seed cake etc. and many more. 7. DE-OILED CAKES OF OIL SEEDS: Groundnut DOC, Sunflower DOC, Safflower DOC, Mustard DOC, Soya beans DOC, Till DOC, Copra DOC, Castor DOC, Cotton seed DOC, De-oiled Rice Bran, Soya meal, Soya flake etc. and many mores. 8. FLOURS, POWDERS & OTHERS: Fishmeal, Animal feed, Maize Gluten, Maize Flour, Rice Police, Wheat Atta, Maida, Rava, Suji, Wheat Bran Coarse, Wheat Bran Fine, Besan etc. and many mores.

Digital Ammeters, Electrical Control Panels, Digital Electronic Counter

Digital Laser Meter, Laser Distance Measure

• 500 V AC: 60 A

Features : Attractive & Accurate Digital Meter Usefull For 60A, 500V AC

Portable Hardness Tester, d2 Instrument, Digital Hardness Teste

Thermal Conductivity Apparatus, Turbulent Flow Apparatu

Laboratory Chemicals, Laboratory Solvents, Laboratory Glassware

We deals in supplying of wide range of PH Meter.

Pizometers for measurement of static pressure in pipe lines. Scale fitting, with G.M. cock 30 cm length 45 cm length 60 cm length