HVAC System Dealers in Noida

Double Deflection grilles are suitable for well,ceiling and duct applications.Grilles vanes in double deflection are individually adjustable.Grilles can also be supplied with non-standard frames/boarders as per the customer requirements.   Fixings:- Countersunk screw holes through flange Concealed finings - see optional extras Technical Data:- All single and double deflection blades are fitted through nylon bearings, which ensure that the blades remain firm once set in position and also removes the possibility of noise created at higher velocity through the grille. - Sizing monogram is opposite Packaging:- Each grille is individually wrapped to ensure the product reaches you in perfect condition. Optional Extras:- Non standard sizes available on request Painting to any BS or RAL color of your choice .FX/SD - Fixed blade (45° single reflection), single deflectionCF - Concealed spring fixings. Features The blades are fixed by wire and adjustable from 0-180 degree,giving required controllable airflow direction. Choice of Vertical or Horizontal front blades fitted to customers' requirements. Anodized or powder coated white , colour RAL 9010, 9016, other colours on request. Frame is curved. Fixing with SFR or visible screws mounting. Material Used In Manufacturing Extruded Aluminium Sections/M.S. Sheets. Finishes EPROXY POLYESTER POWDER COATED(Broken off White/Pure White/Ivory) Natural Anodised Other powder coating finishes available on request. Border and blades are anodized, aluminum Painted Finish- to any RAL or BS color.

Our firm holds immense experience in offering an elaborate range ofIndustrial Ducting Systems. These Industrial Ducting Systems are manufactured using high-grade material that determine their durability and flawless finish. Available in varied dimensions and technical specifications, these Industrial Ducting Systems to diverse industrial requirements. Further, we can design a duct system to correspond with the system already in use. Owing to their application specific design & qualitative features, these ducting are in high demand of our clients.

Airmake Cooling System manufactures a comprehensive range of control dampers suitable for all commercial HVAC applications, to the industry leading ultra-low leakage, premium quality airfoil control damper.

Galvanized Steel, Aluminum, Mild Steel (CRCA) Stainless steel (maximum of .8 mm), etc.   APPLICATION HVAC Ducting / High Pressure Air Line / Boiler Flue / Exhaust Diesel DG Set / Pneumatic / Dust Collection / Water or Sewerage Treatment 9S.S.0/ Column Former.

In this write up, an energy-saving device is introduced into the air-handling unit (AHU). Due to increases in energy costs, energy saving devices or systems have become the new preferred trend in tropical countries. A primary cooling coil system is incorporated into the AHU to recycle the condensate water in order to achieve energy savings. The warm outside fresh air is drawn through the primary cooling coil to recover the latent heat of condensate water. The large temperature gradient between the warm fresh air and condensate water enlarges the amount of energy recovered. This system is well applicable to primary AHU which serves primary air to the airconditioning system. The cost of installing the device is negligible but in returning long term saving. Furthermore, the de-cooled condensate water can be drained off through non-insulated drain pipe. The idea generation is discussed in the introduction. Chapters 2 and 3 describe the preliminary calculation of the energy saving percentage. Chapter 4 shows the detailed theoretical study of the development of the energy saving system. This shows the viability of the idea. Chapter 5 will recommend the design of the primary cooling coil configuration to achieve the desired cooling effect and energy saving strategy. Lastly, the conclusion of the whole study is presented.In tropical countries such as the United Arabia Emirates (UAE) and Malaysia, the climate is always hot and highly humid throughout the year. Lots of energy is consumed for Air-Conditioning and Mechanical Ventilation (ACMV) systems. For buildings such as hotels and hospitals, energy is used to cool down the fresh air in the primary AHU and pumped into the building to achieve the internal air quality required. Due to the high humid climate, lots of condensed water is drained away as a by-product. However, the cooled condensate water actually consumes 2% of the total cooling load of the system on average. Here, we are studying the recovery of the condensed water in which the 2% energy can be saved. 2% of energy for a system running 24 hours a day can make a significant reduction for the operating cost. The condensed water is first collected by the condensate drain pan below the main secondary cooling coil. Then, the collected condensed water is pumped into the primary cooling coil for the de-cooling process.In order to maximize the energy recovery, a primary cooling coil is recommended to be installed at the fresh air intake opening of the AHU where the temperature gradient between the air outside and condensate water is greater, rather than at the side in which air returns or at the mixing plenum.

We offer best quality of insulated ducts to our clients...  

Floor mounted fan section are available from 2000 CFM to 35000 CFM. Ceiling suspended fan section are available from 1200 CFM to 4000 CFM (Direct Driven) and 3000 CFM to 6000 CFM (Belt Driven) Calculations of cooling loads and air flow requirements for each control zone. Psychrometric analysis for critical areas, calculation of reheat figure, selections of apparatus dew points and finalizing air treatment process.     CASING : (DOUBLE / SINGLE SKIN) Rigid corrosion resistant extruded aluminium hollow framework held together with fiber glass corner joints. Double skin sand-witched panels with inner skin of 24 G (0.6 mm) plain galvanized steel sheets & outer skin of 24 G (0.6 mm) pre-coated galvanized steel sheet. Casing Panels are injected with high pressure PUF insulation having density of 38±2 kg/m³. Standard AHU models have 25 mm thick panel. Die cast aluminium hinges and nylon handle on each access door. Assembly is done using self drilling and self tapping galvanized sheet metal screws. Floor mounted Units are skid mounted. The base frame is rugged in construction made from galvanized steel sheet. Ceiling suspended fan section are also available. Double skin casing is standard. SINGLE SKIN casing in 18 / 16 gauge pre-coated GI sheet is also available as an option.     SALIENT FEATURES 200 mm extended insulated drain pan in GI / SS (Optional) 3 rows cooling and 1 row heating coil (Optional) Wide capacity range :2040 CMH to 59500 CMH 4 rows cooling coil (Optional) External static pressure of 0 , 3 , 6 and 8 mm (Optional)

In this write up, an energy-saving device is introduced into the air-handling unit (AHU). Due to increases in energy costs, energy saving devices or systems have become the new preferred trend in tropical countries. A primary cooling coil system is incorporated into the AHU to recycle the condensate water in order to achieve energy savings. The warm outside fresh air is drawn through the primary cooling coil to recover the latent heat of condensate water. The large temperature gradient between the warm fresh air and condensate water enlarges the amount of energy recovered. This system is well applicable to primary AHU which serves primary air to the air-conditioning system. The cost of installing the device is negligible but in returning long term saving. Furthermore, the de-cooled condensate water can be drained off through non-insulated drain pipe. The idea generation is discussed in the introduction. Chapters 2 and 3 describe the preliminary calculation of the energy saving percentage. Chapter 4 shows the detailed theoretical study of the development of the energy saving system. This shows the viability of the idea. Chapter 5 will recommend the design of the primary cooling coil configuration to achieve the desired cooling effect and energy saving strategy. Lastly, the conclusion of the whole study is presented.