Packaging Machine Dealers

  Since our the advent in this industry, we have been engaged in delivering quality standard packaging machines to our beloved clients. Our vast industry experience have made it possible for us to offer high specification pouch packaging machine. The finest quality pouch packaging machine available through us are specifically designed to carry out your all quality work. Manufactured with the most modern technology and backed by the optimum quality raw material, our pouch packaging machine are developed to meet all the standard prevailing worldwide. Our clients have highly cherished the compact design which also let the material inside the packet to flow freely. Advantages: 1. Perfect for different kinds of packaging 2. Portability 3. Manufactured from high quality standard material to make it robust. 4. Perfect sealing in one go which increases productivity. 5. Suitable for all FMCG and consumer goods manufacturing industry.

Jar or Bottle Packaging Machines are one of it’s kind. These machines are basically designed for filling mineral water into jar (made of plastic or polyester) or bottle which is comprised of different stages and all these processes are automatic. Packing mineral water into jar is comparatively faster process as it involves latest technology which is safe and increases productivity within minimum time.

Form Fill Seal Machine _powderForm Fill Seal Machine, can pack Granules, Powder Products such as Tea ,Coffee, Spices, Salt, Tobacco, Mouth Fresher, etc in a 3 side/4 side seal sachets. Features:Pack Size : 10gms-100gms Roll Width : 150mm(Min) - 300mm(Max)Repeat Length : 50mm(Min) - 150mm(Max)Speed : 40-50PPMType of Bag : Center Seal/3 side seal/4 side sealPower Supply : 220VAC, Single Phase,50HzConsumption : 2 to 2.5 KWProduct Contact Parts : SS-304/316L Dimension : Net Weight : 280 kgsOptional :

We are offering pneumatic type packing machines. Automatic form fill seal machine (pneumatic type) with cup filler is used for packing of granular, powder, liquids and free flowing products in a wide range of consumer packs (small sizes) with volumetric cup based system in center sealed/ three side sealed/ four side sealed pouches, ensuring high speed and production rate with less change-over time. application aall products as sugar, coffee, tea, namkeen, snacks, dry fruits, nuts, rice, cereals, corn flakes, cashew nuts, pulses, candy, spices, milk powder, detergent powder, pesticides, tobacco, technical specifications: sealing types 3 side seal, 4 side seal & center sealing packaging size (length) 50 to 350 mm. (film width) 75 to 400 mm. Packing speed 15 to 60 pouches / minutes. (depending upon the size) packaging range 10 gms. To 500 gms. Packing material any heat sealable laminated films motor 1/2hr, 220v ac. 50hz. Single phase. Heater load 4 side seal 3 side & center seal (450x4nos.) (150x2 nos. 450x4 nos.) dimensions / wt. L : 1000, w : 1000, h :2300 (mm) / 600 kgs.

In the view of our immense knowledge in this domain, we are counted amongst the most profound manufacturers and suppliers of Automatic Pouch Packing Machine. This machine is used for making pouches ideal for packing cosmetic items, food items and other small products. We manufacture this machine keeping in mind the changing market trends, using high quality materials. To provide a defect free range, we check this Automatic Pouch Packing Machine on efficiency and performance parameters. Easy to operate High working efficiency Less power consumption

We are one of the best manufacturers as well as suppliers in the entire market. Our product Dip Dip Tea Bag Packaging Machine is well known for its long working shelf life. The supreme quality with which this product is made has impressed our clients. This machine is tested by our quality experts on different parameters so as to offer flawless product at users end. We entertain only medium size or bulk size orders. Features: Optimum temperature for sealing Rust free Compact design Advantages: Efficient, effective packing Machine is centrally controlled, Has digital display Easy to Operate/Less Servicing Required No rusting Ease of installation and shifting To print M.R.P, Month of packing, Lot No. Etc. Displays / controls Sealing Temperature of Sealers Benefits: Savings on wastage System runs in Synchronization High Run Time / Increased Productivity Long Life Savings On labor Helps in detecting manufacturing and expiry date. Optimum Temperature for Sealing / Better Sealing

We are offering pouch in pouch packaging machine. Specifications this machine is designed to perfectly pack small bags in to big bags in uniform system automatically. fully automatic secondary packaging system to pack small pouchesbags in to master bag poly bag secondary packaging machine is to pack pouches of grains and powders into pre-formed bags. The machine is fully automatic in nature. These machines replace high cost of cartoning and baling options. At the same time it also overcomes manual and disorderly packaging. This automates the entire secondary packing process and saves labor, time and space. It is an extremely efficient and cost-effective solution for all the secondary packaging requirements. description of machine: 1. The machine collects the input of pouches from vffs machine. 2. Pouches are then passed on to a online pouch check weighing system where every pouch is online checked for correctness in the weight and rejected if not in the specified weight range. 3. The pouches are then taken up through and compression belt where at the end the pouches are counted and dropped in an collector unit. 4. The bag magazine hold polybags which are automatically pickup one by one and loaded on to an gripper for filling. The gripper is placed just beneath the pouch collector. 5. The exact count of pouches is filled into the bag after which the bag is given out to an track which carries the bag for auto stitching. 6. The filled bag is passed through and auto sealingstitching machine where the bag is sealedstitched automatically. 7. The filled bag is check for the weight at the end to verify the correctness of the pouch count inside.

1.1 ProductsIntra Venous (IV) Fluid. 1.2 VolumesCustomized – 1.3 Drawings for the mouldShall be submitted after receiving the sample from the customer. 1.4 Mould designAs per customers sample or specification. 1.5 Mould MaterialSTAVAC / AL. Bronze material with SS 304 back plate. 1.6 Product Output / Machine500 ml bottle – 1300 bottles per hour.1000 ml bottle – 1000 bottles per hour.2 moulds for 500 ml ( 4 cavity each )2 moulds for 1000 ml ( 4 cavity each ) 1.7 Plastic MaterialLDPE / PP :- 3020D Basell, LE 6607 Ineos / Borealis, FE 8000 Qatar PetrochemicalBB 120 LG Chem 1.8 EnvironmentRoom temperature: 23 Degree C (+/- 2°C) (not below 15 Degree C)Voltage tolerances - max, ± 10 %Cooling water temperature at full load - max. 12 Degree C

The company has firmly cemented its position among the Manufacturers, Exporters & Suppliers of FFS Pneumatic Machine. The FFS Pneumatic Machine is a half-automatic pneumatic gel fill machine for pasting ointment to the vertical cream filling machine. The feature-studded FFS Pneumatic Machines are known for their speed and easy usage as well as efficient filling operations. Features Half automatic pneumatic gel fill machine High filling accuracy Filling to the paste and cream Reaches the GMP standard  Description  Adopts imported parts, piston and cylinder made of stainless steel and poly-tetra-fluoro-ethylene Excellent qualified imported components and perfect mechanical design ensure leading position among domestic similar machine New vertical design that is light and easy to operate Switch function between manual and automatic, with automatic condition providing continuous fill with set speed and manual condition requiring operator steps on footplates to manage filling Continuous stepping footplate changes to continuous filling condition Cylinder and three-way parts use cuff connection which is easy to remove No need for any special tools and easy to clean Anti-leaking filling system with movement of the closure head as cylinder moves up and down during filling Closure head moves down by cylinder and valves will open and start filling material; with upward position leading to the valves being closed and filling being stopped to avoid leaking and wire drawing