Solar Power System Dealers in Noida

A solution for most isolator applications within the solar photovoltaic market can be found“Available in a totally insulated enclosure with the option of a red/yellow or grey/blackpadlockable handle”degree of protection to IP 66/67 they can be installed in the most arduous of environments.complete range of AC switch disconnectors is also available in totally insulated enclosures

Purchase high quality, feasible and durable Solar Wind Turbine Systems, from us! We are a trusted firm, engrossed in manufacturing, exporting & supplying Solar Wind Turbine Systems, globally. Our Solar Wind Turbine Systems stand tall on the grounds of expectations due to their sturdy built, high-quality and excellency. Get in touch with us for acquiring them at feasible prices.

Green Optima is a another design of Go Green which is a fixed roof top mounted type structure used mainly for KW roof top plants. Our Design is as designed so that it can economical, easy to install and can be used on any roof. Robust testing of the design is done with different design tools to give our client piece of mind. Complete structure is bolted and very easy to install so it is easy in transporting, stocking and installing. Green Optima is specifically designed for installation in small & constrained spaces and can be arranged in various configurations by iterating the structural components and their operative section types. Based on the type of design Green Optima can be categorized in two types : 1. Single Pole Structures 2. Dual Pole Structures Features Of Green Optima : 1. The structure comprises of vertical post, rafter, bracings, purlin & gussat plate along with accessories 2. L Brackets connect the vertical rafter to horizontal rafter or the purlin as per the design, L Brackets are used specifically when the interacting component possess C Sections 3. Designed for wind speeds 150-200 Kmph 4. Orientation : Portrait/ Landscape 5. Ground clearance 400 – 600 MM 6. Approximate mass of structure excluding the module weight 4.5 – 7 Kg/m2 7. Chemical anchoring is provided 8. Orientation : Portrait/ Landscape 9. Galvanization : Post hot dipped – 80μ -120μ Pre Galvanized Ms 550gsm 10. Yield Strength : 250 – 350 Mpa (ms) Customized design are provided as per the roof and client requirement

A recent development in renewable energy technology is 'grid-interactive' or two way grid interconnection. These systems use sophisticated control equipment so that when your renewable energy system produces more power than you need, the excess power is fed back into the grid i.e. power is exported to the grid. When your system doesn't produce or have enough power, then you draw power from the grid. Some electricity retailers offer 'net billing' arrangements, so that they buy the electricity you produce at the same price as they sell their electricity to you. The renewable electricity is produced as Direct Current (DC). The DC electricity from the panels passes through a grid-interactive inverter, which converts the DC electricity into Alternating Current (AC), which is the type of electricity supplied by the grid This AC electricity is then used by any appliances operating in the house. If more electricity is produced than the house needs then the excess will be fed into the main electricity grid. Conversely, when the renewable system is not generating enough electricity to power the house, the house will draw power from the grid. Grid interactive systems eliminate the need for a battery backup for when the sun doesn't shine (if it’s a solar system) or the wind doesn't blow (if it’s a wind turbine). In effect, the grid serves as your battery. This means that maintenance costs for your system will be less. It should be noted that without battery storage, a grid connected system will shut down when there is no power on the grid. Features Grid interactive systemsLow Maintenance CostsEco-Friendly

Solar Street light is a complete package of Pole, LED Light , Battery Bank, PV Module. During the daytime the Module uses sun power to charge the rechargeable batteries and the LED has an automatic sensor which turns on the light.

The Solar home lighting system essentially consists of the Solar module, suitable module mounting structure, battery, battery box, charge-controller, luminaries, inter-connecting cables and switches etc. All light assemblies have built-in high efficiency and high frequency DC to AC inverter circuits for suitable to run CFL lamps. The Indoor lighting systems would also come with a provision to power a 12V DC table fan or a black & white Portable TV as option.

Technical Specification: Solar Street Light : 9 watt/ 12 watt/ 15 watt/ 20 watt Luminary Body : Aluminium Die Casting System Operating Voltage : 12 Volt DC LED Used : 1 watt / .5 watt LED Make : OSRAM / Dominant / Everlight Protection : Protection against over charge/Deep Discharge/ Current Reverse flow Lumens/Watt : 120/Watt Driver Circuit Efficiency : Above 90% Hours Of Operation : As Per Specification Load Disconnect(Low Batt.) : 10.8 Volt ( Battery Voltage) Load Reconnect : 12.5 Volt ( Battery Voltage) Frame : Corrosion Resistant Solar Panel Rating : 40-100 Watt ( as required) LED Life Span : 60000+hours Salient Features Low installed cost and minimal site impact with no trenching, cabling or wiring. Minimal ongoing costs with no electrical bills or bulbs to change. Immune from power outages. Provide a visibly green statement without recurring carbon emissions. Utilizing solar power and LED lighting the SPL is fully self-contained and offers significant benefits over typical wired pathway lights. The performance of the SPL Series Solar LED Light is maximized through the use of proprietary Energy Management System (EMS) technology that allows the luminaire to function in harmony with it’s environment. The EMS ensures that regardless of low-solar weather patterns or unusual charging conditions such as shading, the pathway light continues to provide quality light that enhances the appeal and safety of the night time environment.

We have had traditionally open circuit water heating systems in the market. The cold water is input in a collector having six or nine copper pipes with fins. As the water gets heated it rises and collects in the tank for distribution. Water quality being very harsh, as it gets heated and rises it leaves salt deposition on the capillaries, Choking them in some time. The result is a choked system, which stops functioning. EPL pioneered in the introduction of closed circuit technology by providing indirect heating system. Solpower solar water heating system is a heat exchanger. It has a thermic fluid which heats the water in the tank and hence no deposition takes place. SS lined tank takes care of corrosion in the tank. The systems come with long warranty period of five years.

Our solar shading systems offers, designers the opportunity, for distinctive architectural impact whilst reducing solar heat gains. External solar shading is one of the most effective ways to control the internal conditions of a building. Radiation from the sun is transmitted, absorbed and reflected by the louvres. As a result solar heat gain is prevented from passing into the building, minimizing ventilation requirements and reducing cooling loads. If a controllable system is installed, adjustable louvres track the position of the sun, thereby reducing the numbers of days when the building overheats. Equally, in winter the louvers may be adjusted in such a way that the building benefits from the heat from the sun, and they can be closed at night reducing heat loss. At the same time, daylight levels are enhanced, and levels of glare are reduced.

The Solar LED Home Lighting System is deigned to provide uninterrupted light by the use of Solar Energy in remote areas where power supply is not available during night time. It aims to provide light by means of 2 Power LED Luminary. The system provides 3 days of autonomy. Even additional feature such as Fan (D.C), Television (D.C.) can also be run by this system. Duration of WorkModel-03 - 5-6 hours dailyModel-06 - 5-6 hours dailyModel-08 - 5-6 hours dailyGeneral Electrical SpecificationsMax Charging current- 6AMax. Load current- 6ALoad disconnect battery voltage- 11 ± 0.2 volts or as required Load reconnect battery voltage- 12.5 ± volts or as requiredConstant Charging Voltage- 14.5 ± 0.2 volts or as requiredIdle current consumption- Less than 10maLight Output- 600 lumens (each 9W CFL) and 900 lumens (each 11W CFL)

The standalone solar photovoltaic street lighting system comprises of a Solar PV module for battery charging, rechargeable lead acid battery for storage, Compact Fluorescent Lamp (CFL) or Light Emitting Diodes (LED’s) as light source, suitable electronic control circuits for the operation of the lamp and safe guard to the battery charging & discharging and hard-ware like pole, battery box etc. for fixing of these sub systems,CFL is an ideal lighting system for the illumination of streets, squares and cross roads located in areas that are not connected to the power grid.

Solar Cooling System, Cells, Solar Water Pumps, Solar Water Heate

Gel Batteries, Offline UP

Solar Street Lighting System, Solar Ligh

Solar street lighting Systems. with all accessories.

Rooftop Solar Pv Systems, Solar Lantern, LED Street Light, Solar LED Panel

Solar Power System, Polyimide Masking Tape, Holding Tap

Solar Street Lighting System, Solar PV Modules, Solar Installatio