Tablet Compression Machine Dealers

We are a well-known premium Manufacturer, Exporter & Supplier of Digital Compression Testing Machine based in Delhi, India. We are backed by a deft team of professionals who fabricate the Compression Testing Machine in accordance as per IS: 14858 2000 standard. Our Digital Compression Testing Machine is compact and reliable for testing concrete, cubes, etc., making it useful for site and laboratory applications.   Constructions : High stability Two / Four pillar load frame. Each frame tested for stability and alignment to avoid tension failure during a test and to ensure centre loading. A precise large diameter spherical upper platen for optimum results. Motorized hydraulic power pack or pumping unit with rapid approach and automatic over load protection. Comes standard with safety Guards on all four sides The Complete unit comprises a Loading Unit which is of Two / Four pillar model construction having a cross-head with a spherical seated platen. The lower platen is attached to the top of the piston. Pumping Unit attached to the loading unit by high pressure hydraulic flexible hose pipe. The pump facilitates rapid approach of the platens for daylight closure and also provides comprehensive control over the application of load. A control valve provides fine control over the loading rate for accurate pacing. Maximum load is held and retained for approx. 15 min, unless cancelled, using the panel mounted reset switch. Pace rate set for running the test can be maintained manually. Features : Separate displays for load indication and maximum range. Range for load indication corresponding to 4 – 20mA input digitally settable from front panel. Peak / Normal mode selectable. Up to 9 peaks can be recorded and recalled. Buzzer annunciation at Peak. Relay output for load limit detection with limit digitally settable. Digital tare provided to remove initial error. Non-volatile memory for saving configuration. Configuration lock at real to prevent tampering with Range. Aesthetically designed front panel with membrane switches.

Compression Testing Machine 2000 KN (Electrically Operated) For Testing Lab     NAUGRALABS LABORATORY PRODUCT NAME: COMPRESSION TESTING MACHINE 2000 KN (ELECTRICALLY OPERATED) FOR TESTING LAB NaugraLabs Laboratory Product Code: NLE-Export-038015 Description and Specification for Lab Tenders Compression Testing Machine (Electrically Operated) - Four Pillar type It is an electric cum hand operated for compression tests on concrete specimens up to 20cm dia and 30 cm in height.. Cement and Concrete Testing Lab equipment manufacturers,exporters and Cement and Concrete Testing Lab suppliers The machine meets the essential requirements of various Indian, British & American standards for compression tests. Loading Unit : The hydraulic jack of 2000 kN capacity is fixed to base. The upper platen has got a self aligning action and is attached to a screw which passes through the cross head and can be raised for lowered for initial clearance adjustment. The lower platen rests on the jack ram and is positioned with the help of a centering pin. Loading is accomplished by the upward movement of the lower platen. Pumping Unit : The motorized pumping unit which is housed in an elegant console is of double plunger type and is driven by 3 phase 440 volts 50 cycles electric motor. The pumping unit is separate unit connected to the jack by means of a steel connecting tube. A junction box is suitably fixed to connect the motor to the mains through a push button starter. The pumping unit is fitted with gauges. A maximum pointer is provided to facilitate taking of the reading after failure of the specimen. The pressure gauges are fixed on the pumping unit at an angle for easy readability.The machine is fitted with a hand wheel control which enables the rate of application of load to be varied. The machine is also equipped with facilities for hand pumping in case of power failure. The electric pumping unit is fixed with a micro-switch off the motor automatically as the load on the machine approaches the rated capacity. Relays are also incorporated in the pumping unit so that in the case of break-down of power supply, the motor will stop and would not-re-start unless starting switch is operated. Other Capacity : 10 Tons, 25 Tons, 50 Tons, 100 Tons, 150 Tons, 200 Tons, 300 Tons

Compression Testing Machine (Electrically Operated) - Four Pillar type It is an electric cum hand operated for compression tests on concrete specimens up to 20cm dia and 30 cm in height. The machine meets the essential requirements of various Indian, British & American standards for compression tests. Loading Unit :The hydraulic jack of 2000 kN capacity is fixed to base. The upper plate has got a self aligning action and is attached to a screw which passes through the cross head and can be raised for lowered for initial clearance adjustment. The lower plate rests on the jack ram and is positioned with the help of a centering pin. Loading is accomplished by the upward movement of the lower plate. Pumping Unit :The motorized pumping unit which is housed in an elegant console is of double plunger type and is driven by 3 phase 440 volts 50 cycles electric motor. The pumping unit is separate unit connected to the jack by means of a steel connecting tube. A junction box is suitably fixed to connect the motor to the mains through a push button starter. The pumping unit is fitted with gauges. A maximum pointer is provided to facilitate taking of the reading after failure of the specimen. The pressure gauges are fixed on the pumping unit at an angle for easy readability. The machine is fitted with a hand wheel control which enables the rate of application of load to be varied. The machine is also equipped with facilities for hand pumping in case of power failure. The electric pumping unit is fixed with a micro-switch off the motor automatically as the load on the machine approaches the rated capacity. Relays are also incorporated in the pumping unit so that in the case of break-down of power supply, the motor will stop and would not-re-start unless starting switch is operated.

Atwo piece closure having PCO neck finish with liner sealing designed for the Carbonated Beverages Market. 28mm CSD 1810 :- This is a single start thread, two piece closure with single lip liner sealing suitable for carbonated beverages. Decoration in two color printing on top of closure also possible. Instant pressure retention 100 psi for 1 min. Then up to 175 psi .

Shake hands with us if looking out for Compression Testing Machine! We are a prominent Supplier and Exporter of Compression Testing Machine from Delhi, India. Compact design, Best in class and inclined functional life are the highlights of our Compression Testing Machine. We make sure that only flawless Compression Testing Machines are offered to all the buyers. It can be obtained from us at the economical prices.

DIGITAL COMPRESSION TESTING MACHINE , ANALOGUE COMPRESSION TESTING MACHINE,ADVANCED AUTOTMATIC COMPRESSION TESTING MACHINE. We also manufacture the equipments and control systems for sugar industries mainly mill automation, boiler instrumentation, prd stations and embibition water control system.

The Digital Compression Testing Machine has been designed to meet the need for a simple, economic and reliable means to test concrete for its compressive strength. The Digital Indicator incorporates a 4-Digits display calibrated in Kilo Newton (KN) and preset to maximum load capacity fitted with micro switches to switch-off the motor when the load approaches the maximum capacity of the gauge, avoiding any over loading. Relays are incorporated so that the motor does not restart on its own after a power breakdown. The electrically operated pumping units are provided with a control knob to adjust the pace rate which can be effectively controlled by an experienced operator during the course of testing, by observing the progress of the Digital Indicator readings. Optional: 1. Ranges: 50 kN to 3000 kN 2. Channel and Pillar Type Both Are Available. 3. Extra gauges can be attached to the machine (max. 1 nos. ) 3. Electrical connection can either be Single Phase on 220 V A.C., or 3 Phase 440 V A.C.

Our Double Rotary Press is available in both Open and GMP model. Currently more than 300 of our machines are producing tablets across the globe. Some of the key features of the Double Rotary press are: Drive shaft made of alloy steel to ensure longer working life. Turret Ring is detachable from the turret and thereby reducing replacement cost. Discharge chute and feed frame are independent of turret guards, thereby reducing cost of maintenance and also eases setting the feed frame. Double V-belts to increase life of belts

This pulley is manufactured from graded cast-iron with serration Design. The speed variation ratio is 1 : 3. This drive is ideal For Tablet Compression Machine application and is suitable for dusty environment, compact size and economical cost. The Speed Variation is achieved by changing the centre distance between Drive R & DriveN Shafts by means of adjustable motor base.