Inspection Systems Dealers

IRIS is a non-destructive testing technology for pipes and tubes that uses ultrasonic waves.Many plant operators in the oil and gas and power production industries face the issue of increasing asset efficiency and life expectancy while maintaining safety and reliability. As a result, proper inspection of critical components such as pipes and tubes is critical to maintaining the plant's integrity.Internal Rotary Inspection System (IRIS) is a tube inspection system that can detect corrosion, pitting, and wall loss in boilers, heat exchangers, air coolers, and feed water heaters. IRIS is extremely versatile since it can be used on a wide range of tube diameters and wall thicknesses, and it is suited for both ferrous and non-ferrous materials. n IRIS probe is inserted into a tube flooded with water. The probe is fitted with a transducer that generates an ultrasonic pulse along a path parallel to the axis of the tube. A rotating mirror directs the ultrasonic pulse into the tube wall. The mirror is driven by a small turbine that is rotated by the pressure of water pumped into the tube. The ultrasound pulses are reflected by the inner-diameter (ID) wall and outer-diameter (OD) wall of the tube and the time-of-flight difference between the two diameters is used to calculate the wall’s thickness. As the IRIS probe is pulled, the spinning motion of the mirror results in a helical scan path ensuring full coverage of the tube. Merits of IRIS Tube Inspection Suitability for ferrous and non-ferrous materials. Detection of corrosion, pitting and wall loss. Accurate wall thickness measurements.     Sensitivity to both internal and external defects. Defect position can be located in relation to tube length. Flexibility as a back-up to remote field, magnetic flux leakage and eddy current inspections.

achieves greater component density. This translates to a reduced tolerance on PCB assembly which as a consequence has to become tighter. Present-day electronic circuits are assembled with very small-footprint components, some as small as 0.2 to 0.1 mm. Viewing such components require high magnification inspection systems but at an affordable cost. There is a pressing need for reliable and accurate visual inspection of PCBs. Nuline has made a revolutionary breakthrough in this field of inspection systems when it designed and developed a low-cost visual inspection system for easy viewing of electronic circuit boards – the NULINESCOPE. The Nulinescope is a monocular, continuous zooming, optical inspection system with a high definition colour CCD camera and TV system together. With a high working distance and wide field of view, there is an exceedingly high definitionoutput. A substantial advantage over other run-of-the-mill microscope inspection systems is that there is minimal eye-strain in the Nulinescope enabling faster and simpler inspection. Nulinescope offers both vertical and 45 degree slant (3D) viewing of objects. The Nulinescope offers magnification up to 100x and the images can be captured on a computer by using the USB cable provided. The unit is fully integrated for line inspection as well as quality checking. All this at a fraction of the cost of its counterparts in the market today. HIGH PERFORMANCE MICROSCOPE 3D VIEW OPTION HIGH RESOLUTION VGA CAMERA MAGNIFICATION: 10x to 100x CLEAR DISTORTION FREE IMAGES ZERO GLARE LCD-TFT DISPLAY VARIABLE INTENSITY LED LIGHT

Machine is with conveyor belt. Above this machine there is a lighting source to inspect the capsule minutely. The capsules come out thought vibrator and move on the conveyor belt and while moving they revolve around their axis due to angular guides. This total visual inspection can be undertaken by an operator to sort out defective capsules.   Capsule Polishing Machine Consisting of a stainless steel chambers installed with filter cloth, a revolving variable speed spiral nylon brush stainless steel powder collector. The capsules travel from one end to other end. During this travel they are subjected to roll in between the nylon bristles and filter cloth. In this course the powder on the capsules and at the edge are removed and sucked by the Dust extractor. The Capsules coming out of the chute are thoroughly polished, shiny & clean.   Dust Extractor The Dust Extractor is used for collecting loose powder from the polishing chamber; this machine is also used for cleaning operations on Automatic Capsule Filling Machine.

4m Automation offered Vision Inspection Machine or Sorting Machines.   Vision Based Inspection Machines for following activities Product sorting Dimension, Measurement Absence Presence Color Identification We have made machines with Smart Cameras and PC Based Cameras. Inspection machine with up to 4 cameras for one application