APFC Panel Dealers in Pune

Our product the Automatic Power Factor Control Panel is one of its kinds with its robust build and dimensionally corrects designs. These power factor control panels are corrosion resistant and are shock proof as well. Automatic power control panel (APFCP), accurately monitors the reactive power in power systems and thus saves electrical power and energy. They are equipped with capacitors with series reactors which minimize the harmonic current and alter the system voltage and current. Enclosed in high quality rust proof steel, the panels are durable.  Features : Fully AutomaticBased on programmable micro controller technologySelects capacitor banks through VAR sensing principleAutomatic scrolling of voltages and currents in three phase viz. KW, RKVA, KVA and PF through LCD displayLow and high voltage protection Applicable in : Water pumpsHeavy machineryIndustrial equipmentMedical & office equipmentAutomotive industry

With our rich industry experience, we give an ideal solution for the most demanding APFC Control Panel or Automatic Power Factor Control Panel in the market. Our APFC Control Panel APFC panel (Automatic Power Factor Correction Panel) not only maintains high power factor but also eliminates the need for constant manual intervention. Our customers can avail the servicing solution and installations for all types of APFC Panels and APFC Controllers. Features : Consistent power supply to the load in absence of main supply Smooth Start / Stop Sequence DG set protections Protects the load from voltage fluctuations Audio visual indications of various fault conditions User friendly Auto / Manual modes of operation GUI interface with TCP/ IP over GSM/GPRS (Optional)

Automatic Power Factor Control Panel is designed to maintain power factor of plant to unity. To maintain power factor of unity means to achieve demand in KVA on lower side. Power factor is maintained to set value using APFC relay in auto mode where as in case of failure of APFC relay push buttons are used. Auto as well as manual mode is provided for power factor control. Various types of capacitors are used depending on load conditions. Typically MPP, APP or mix dielectric types of capacitors are used. In case of non linear loads like VFD, UPS thyrister switching, suitable reactors are used along with capacitors to filter harmonics.

We design and manufacture automatic power factor correction panel. (contactor switching) Power Factor is ratio which represents actual power dissipated in A.C. circuit to the product of R.M.S. voltage and current. The phase difference between voltage and current is caused by reactance in circuit and represents power that does no useful work. Power factor is low in industrial settings where most of the plant energy is used to power electric motors. It is lowest when the induction motors tend to be oversized and under-loaded. A lagging (less than 1.0) power factor causes some additional energy loss because more current is required to deliver a required amount of power. Correcting power factor can be an appropriate and cost-effective measure. Inductive load is major cause of poor factor and which is responsible for unnecessarily power loss, hence it results in rise of electricity bills of industrial, commercial consumer so Reactive power compensation is very need of today’s industries. We can easily control and maintain power factor near to unity with Automatic Power Factor Correction Panel.   APFC Panel Provides   Automatic power factor correction   Wide range of correction stages 4 - 14 stage   Dampen effect of transient during capacitor switching   Optimum reactive power compensation.   Savings and incentives in electricity bills

We manufacture optimum quality APFC Panels. APFC Panels means Automatic Power Factor Correction Panels. Owing to their energy efficient design, longer serving life, high performance and low maintenance, these APFC panels offered by us are highly demanded in the market. These offered APFC Panels can be customized in accordance with the requirements and demands provided by the customers. Our presented APFC Panels are best in working and finely prepared by using best components and other accessories. These panels are light in weight and easier to install without any damage. Durable in frame, these panels are damage resistant and do not get damaged due to longer life working and other effects. Some of the Salient Features : Quality approved Durable frame Reliable working Easy to operate Minimum maintenance Longer functional life.

APFC Panel has microcontroller based programmable controller which switches the capacitor banks of suitable capacity automatically in multiple stages by directly reading the reactive load (RKVA) which works in the principle of VAR sensing tends to maintain the PF to 0.99 Lag. The capacitor banks may be selected in number of stages as 4/6/8 according to the load pattern. Modern power networks consists of wide variety of electrical and power electronics loads, in case of such varying loads, the power factor also varies as a function of the load requirements .So it is practically difficult to maintain consistent power factor by the use of fixed compensation i.e. fixed capacitors which shall need to be manually switched to suit the variations of the load. It can lead to situations where the installation can have a low power factor leading to higher demand charges and levy of power factor penalties. In addition to not being able to achieve the desired power factor it is also possible that the use of fixed compensation can also result in leading power factor under certain load conditions. This is also unhealthy for the installation as it can result in over voltages, saturation of transformers, maloperation of diesel generating sets, penalties by electricity supply authorities etc. It is therefore necessary to automatically vary, without manual intervention, the compensation to suit the load requirements. This is achieved by using on Automatic Power Factor Correction (APFC) system which can ensure consistently high power factor without any manual intervention. In addition, the occurrence of leading power factor will be prevented.APFC products are fully automatic in operation and can be used to achieve, consistently high power factor under fluctuating load conditions Reduced KVA demand charges, Lower energy consumption in the installation by reducing losses Preventive leading power factor in an installation. Install APFC Panel to avoid penalties and enjoy the benefits automatically. For maintaining the power factor according to the load factor, proper capacity of capacitors is to be connected. The value of capacitors to be connected will vary with respect to load and its existing PF. There are two ways to maintain PF- Fixing of capacitor at the load end permanently or at the mains. Generally which is recommended for the fixed load like pumps, fans etc. and it is not possible for the load which has variations in the load and PF. The power factor can be maintained by installing Automatic Power Factor Control Panel (APFC Panel)

We design & manufacture LT & HT APFC Panels either contactor or Thyrister operated to achieve unity/near unity power factor. Our APFC Panels is in wide demand in the market due to high performance and optimum efficiency. These are customized as per the specifications of our clients and are in compliance with various industrial standards

APFC or Automatic Power Factor Control Panels are mainly used for the improvement of Power Factor. Power Factor can be explained as ratio of active power to apparent power and it is a key factor in measuring electrical consumption. Everyone knows that how costly electricity has become in present time. Therefore it becomes utmost important to cut down on electrical consumption for reducing expenditure.APFC Panels come real handy in the achievement of this purpose Use of these control panels becomes indispensable in those industries where electrical installations are meant to supply to large electrical load. A dip in Power Factor can attract operational losses and a penalty from electricity board, responsible for electricity supply.We offer vide range of standard and customized APFC panels and are competitive in the industry.

We offer unmatched automatic power factor correction panels, and provide effective and reliable power management solutions to customers across industries. We also design apfc according to the clients’ requirements. These panels are installed at the induction load areas where the power factor comes down. Apfc is generally installed in big factories, corporate offices, etc.

Consider our name, if seeking for high quality products that are prepared using the best grade material and modern technology. Our associates procure it from the reliable names after complete quality satisfaction. With our years of experience, our company name figures amidst the most responsive and responsible Suppliers of APFC Panel.

Proceca Engineers & Automation Pvt.Ltd have become one of the reliable providers of optimum quality PCC / MCC / APFC Control Panels.These industrial electrical products can also be designed and manufactured at the vendors’; end as per the specifications provided by our clients. Power Control Center, Motor Control Center and APFC Panel and other panels are offered to our customers at a reasonable pricing. Features: Reliable Shock proof Corrosion & abrasion resistance