Automotive Battery Charger Dealers in Pune

FEATURES Input: 3 phase / Single phase protection. Auto / Manual Float - Boost setting. Thysistor / IGBT PWM Technology. Provision of additional DC feeder for DCDB. Industrial Grade. Less DC Ripple. Isolated Output - No shocks. Highly Efficient and Reliable. Easy to Install and operate. Available from 5 Amp to 200 Amp. Voltage from 12 V to 400 VDC.

The lead acid charger for charging lithium ion battery is good up to the 70 to 80% of the SoC but if we used further it can generate the cell imbalance. Because lithium ion cells do not get self equalized when on top of the charge as the lead acid cells do. After several cycles the cells will go out of balance and each progressive charge cycle will get worse cell imbalancing. And such an imbalance definitely impact battery life.

The product looks simple but is critical and important for charging of battery to full gravity. It is also concerned with the performance and life of a battery. The Battery Chargers are CVCC ( Constant Current – Constant Voltage ) type and hence always keep the batteries fully charged. From 14 V 2 amps upto 120 V or 400 V DC at 10 to 50 amps.or more in some cases. Input : Single Phase or Three Phase.Chargers are available in open frame ( very small capacities ) and in enclosures. These items can be made available with Meters on the enclosure for measurement and display.

The Quench Classic is a powerful and dependable DC fast charger available in 60kW and 120kW variants. Designed with dual protocol support (CCS & CHAdeMO), it ensures wide compatibility across EV models and is ideal for public stations, commercial fleets, and charging hubs.Key Features:Available in 60kW / 120kW configurationsSupports CCS and CHAdeMO protocolsWeatherproof for outdoor usageSecure RFID accessEthernet, Wi-Fi, 3G, and 4G readySlim and compact footprintIntuitive and user-friendly interfaceOCPP-ready for backend integrationHighly reliable systemLow maintenance for long-term use

Model No: PJE-120. Industrial Grade Din Rail Mounted Mains Operated Switch Mode Power SupplyInput 160 to 290VAC Output 24VDC at 5 AMP with constant Voltage constant current o/p characteristic suitable for any type of industrial load

The SMPS Battery Charger is serving the twin purpose of supplying the DC load and simultaneously charging 70 AH, 110 Volts SMF lead acid batteries. Input Rated operating Voltage : 3 Phase, 415 Volts 5%Limiting operating Voltage : 3 Phase, 415 Volts 15% Limiting operating current : 20 Amp Output Rated output Voltage : Function of (Battery voltage, battery current, temperature of the battery)< 135 V Battery charging current : 20 Amps Maximum Output Current : 50 Amps Maximum load current : 50 Amp minus battery charging current Maximum output power : 130 VX50 Amp = 6500 watts Ripple Current : V

We are offering switched mode power supply battery charger. features preset op voltage (â± 10% adjustable). current limit adjustable from 5% to 110% of specified load current. load & line regulation: â± 0.05% max. ripple & noise: 1 mv (r. M. S.) max. protected against overload & short circuit by means of automatic crossover characteristics. continuous metering of output voltage & current. input voltage: 230v ac â±10%, 50hz, single phase. manual boost charging facility. battery under voltage protection. output voltmeter (load or battery with selector switch). output ammeter (load or battery with selector switch). operating temperature range: 0 to 55 0 c. Optional facilities : (at extra cost) output over - voltage protection, voltage dropping diodes. 115vac (â±10% mains operation).

In a world with exponentially increasing population and their increasing needs and booming lifestyle choices, an ever-increasing requirement of energy resources to provide for them is sure to run out of stock sooner or later. Fuel, like petrol, diesel, or crude oil, electricity, and natural resources like coal and wood have been running our world so long, but energy resources are stipulated and with increasing demand that day is not far away when our limited resource banks shall become depleted and there shall be no fuel to drive the machinery that provides for our needs. In order to avert such situations, we have to start early and make preparations so that awareness is created and the initiatives are endorsed by masses. Only when initiatives are endorsed by masses then only can the idea become successful and bring about a revolution. a revolution to change the approach towards consumption of energy. For example, a car runs on fuel, petrol or diesel. In a fast-paced world where buying cars have become more affordable, fuel consumed by cars not only is proportional to the distance the car runs or is stuck but also responsible for automobile emissions which pose a threat to the environment.

Increasingly strict regulations to reduce pollution in the cities lead to a rapid change of the infrastructure and public transportation network to electric mobility. These are, for example, charging stations for cars or electric bus terminals. Electric busses ensure sustainable urban mobility. The retrofitting of bus routes solely driving with electric buses assumes a rapid development. Solutions are, for example, implemented together with local utility companies by rapid charging stations HPC (High Power Charger). Our charging pantograph is a key component of these charging stations.