Compression Testers Dealers in Pune

We offer box compression tester features: •direct digital readout of compression strength and deflection. •mechanical drive system as specification in is 7028-vi. •sophisticated electronic controls for precision and easy operation. •available in capacities : 0-1000 kgf and 0-2000 kgf. •electronic digital display panel with least count of 1 kgf and deflection panel with a least count of 0.1 mm. •peak-hold facility provided. •testing speed : 10-+3 mmminute. •provision of faster speed for approach and return to top of specimen. •provision for termination of test at per-selected load (this facility avoide destruction of the box).

We offer a range of Compression Tester. The Compression Tester is widely used in pressure testing, stack testing of carton, shape change, beehive crate and other packages. Compression Tester is perfect for measuring load & distortion. Compression Tester is available in wide range, to meet the diverse demands of customers. Owning to excellent quality Compression Tester is highly demanded across paper industry, packaging industries and others.

• Maximum size of Specimen:: Diameter 25 mm

APPLICATION: Deflection under Compression Load Measurement Compression Tests POSSIBLE INTEGRATION: Setup with Displacement Transducer/ Linear Encoder With Uni Axial Loading Setup With Enclosure for working with hazardous conditions SPECIFICATIONS: Maximum size of Specimen: Diameter 25 mm Measurement: Dial Gauge or Linear Encoder/ Displacement Transducer Attachment Socket: M 27 X 2 P for Testing Machine (others on request)

• Feature: Printer Port Facility. , Auto tare set facility.

Direct Digital Readout of Compression Strength and Deflection. Mechanical drive system as specification in IS 7028-VI. Sophisticated electronic controls for precision and easy operation. Available in capacities : 0-1000 kgF and 0-2000 kgF. Electronic Digital Display Panel with least count of 1 KgF and Deflection Panel with a least count of 0.1 mm. Peak-hold facility provided. Testing speed : 10-+3 mmminute. Provision of faster speed for approach and return to top of specimen. Provision for termination of test at per-selected load (This facility avoide destruction of the box).

Cube testing machine is used to test the strength of concrete. This machine is quite useful on field laboratories or mobile testing laboratories or vans which frequently change site or location. It is particularly useful where constant and consistent electric power is not available. The load is applied manually and observed on a pressure gauge. The pressure gauge has maximum load indicator which stand still even after the specimen under test crushes and has to be set to zero manually

• Number Of Flower: Testing Machine
• Application: Testing Material
• Availability: 100-200kg
• Country of Origin: 110V
• Automatic Grade: Automatic
• Power: 1-3kw
• Driven Type: Electric
• Total Carbohydrate: 1year

We are counted amidst the well-known names involved in providing quality products from Pune(India). We have strong tie-ups with the leading e-commerce merchants who provide us a secure payment gateway that helps us in avoiding physical movement of money.

We are offering digital compression testing machine. -testing force : 200 ton / 300 ton -loading control : manual / motorized as per requirement - digital display with inbuilt printer

         Compression Testing Machine incorporates design features to enables high accuracy testing with economy, speed and versatility. Loading accuracy as high as + 1%. Straining at variable speeds to suit a wide range of materials. Continous roll autographic recorder supplied as standard to enable study of the behaviors of materials. High reading accuracy due to large size and design of dial. Wide range of standard and special accessories, including load stabilizer. Large effective clearance between columns enables testing of standard specimen as well as structures. Simple controls for ease of operation. Robust straining frame of an extremely rigid construction. Safe operation ensured by means of safety devices.     Application : Compression Testing Machine is designed to test materials and other materials under compression, bending, transverse and shear loads. Hardness test on metals can also be conducted.   Principal of Operation : Operation of the machine is by hydraulic transmission of load from the test specimen to separately housed load indicator. The hydraulic system is ideal since it replaces transmission of load through levers and knife edges, which are prone to wear and damage due to shock on rupture of test pieces. Load is applied by a hydrostatically lubricated ram. Main cylinder pressure is transmitted to the cylinder of the pendulum dynamometer system housed in the control panel. The cylinder of the dynamometer is also of self-lubricating design. The piston of the dynamometer is constantly rotated to eliminate friction. The load transmitted to the cylinder of the dynamometer is transferred through a lever system to a pendulum. Displacement of the pendulum actuates the rack and pinion mechanism which operates the load indicator pointer and the autographic recorder. The deflection of the pendulum represents the absolute load applied on the test specimen.Return movement of the pendulum is effectively damped to absorb energy in the event of sudden breakage of a specimen.   Machine consists of :    Straining Unit :   This consists of a hydraulic cylinder and a table coupled with the ram of hydraulic cylinder, mounted on robust base. The cylinder and the ram are individually lapped to eliminate friction. The cross-head is connected to two screwed columns and is driven by a motor, for rapid adjustment of test height. An elongation scale with a minimum graduation of 1.0 mm, is provided to measure the deformation of the specimen.Compression, transverse, bending, shear and hardness tests are conducted between the lower cross head and the table.   Control Panel :  The control Panel consists of a power pack complete with drive motor and an oil tank, control valves a pendulum dynamometer a load indicator system and an autographic recorder.    Power Pack : The power pack generates the maximum pressure of 200 kgf/cm2. The hydraulic pump provides continuously no pulsating oil flow. Hence the load application is very smooth.    Hydraulic Controls : Hand operated wheels are used to control the flow to and from the hydraulic cylinder. The regulation of oil flow is infinitely variable. Incorporate in the hydraulic system is a regulation valve, which maintains a practically constant rate of table movement.    Load Indicator System : This system consists of a large dial and a pointer. A dummy pointer is provided to register the maximum load reached during the test. Different measuring ranges can be selected by operating the range selection knob. An overload trip switch is incorporated which automatically, cuts out the pump motor when the load range in use is exceeded.    Pendulum Dynamometer :  This unit permits selection of favorable hydraulic ratios producing relatively small frictional forces. Pressurized oil in the loading cylinder pushes up the measuring piston proportionately and actuates the special dynamometer system. The piston is constantly rotated to eliminate friction. The dynamometer system is also provided with an integral damper and ensures high reliability of operation. The load transmitted to the dynamometer is transferred through a pendulum to the load indicator.    Autographic Continuous Roll Load-Elongation Recorder : This unit is of the pen and drum type and is supplied as standard. The horizontal motion of the pen produces the load ordinate of the diagram and the drum rotation produces the extension ordinates in the ratio of either 1:5 or 1:10.A continuous roll of graph paper is stored inside the drum and is easily replaced.   Accuracy & Calibration :  AII Compression Testing Machines are closely controlled for sensitivity, accuracy and calibration during every stage of manufacture. Every machine is then calibrated over each of its measuring ranges in accordance with the procedure laid down in BS : 1610 and IS : 1828, FIE Compression Testing Machines comply with Grade "A" of BS : 1610 and class 1 of IS 1828. An accuracy of + 1.0% is guaranteed from 20% from 20% of the load range selected to full load. Below 20% of the selected range, the maximum permissible error is 0.2% of the full load reading.   Special Accessories : These include load stabilizer, Brinell test attachment, Bend Test attachment, Shear Test attachment and a wide range of accessories offered on request at additional cost.   Installation : It is recommended that machines be erected on a foundation. Details on foundation can be given on request.FIE reserves the rights of change in the above specifications due constant improvement in design. The dimensions given above are all approximate.    

We are offering compression testing machine. Compression tests are used to determine how a product or material reacts when it is compressed, squashed, crushed or flattened by measuring fundamental parameters that determine the specimen behavior under a compressive load. These include the elastic limit, which for "hookean" materials is approximately equal to the proportional limit, and also known as yield point or yield strength, young's modulus (these, although mostly associated with tensile testing, may have compressive analogs) and compressive strength.

Model – CTE 200 & 300 4C     Straining at variable speeds to suit wide range of materials. Panel & PC graph enables to study the behavior of material. Rigid fix crosshead straining unit. Simple controls for ease of operation.  

Compression Testing Machine (Electrically Operated) - Four Pillar type It is an electric cum hand operated for compression tests on concrete specimens up to 20cm dia and 30 cm in height. The machine meets the essential requirements of various Indian, British & American standards for compression tests. Loading Unit : The hydraulic jack of 2000 kN capacity is fixed to base. The upper platen has got a self aligning action and is attached to a screw which passes through the cross head and can be raised for lowered for initial clearance adjustment. The lower platen rests on the jack ram and is positioned with the help of a centering pin. Loading is accomplished by the upward movement of the lower platen. Pumping Unit : The motorized pumping unit which is housed in an elegant console is of double plunger type and is driven by 3 phase 440 volts 50 cycles electric motor. The pumping unit is separate unit connected to the jack by means of a steel connecting tube. A junction box is suitably fixed to connect the motor to the mains through a push button starter. The pumping unit is fitted with gauges. A maximum pointer is provided to facilitate taking of the reading after failure of the specimen. The pressure gauges are fixed on the pumping unit at an angle for easy readability. The machine is fitted with a hand wheel control which enables the rate of application of load to be varied. The machine is also equipped with facilities for hand pumping in case of power failure. The electric pumping unit is fixed with a micro-switch off the motor automatically as the load on the machine approaches the rated capacity. Relays are also incorporated in the pumping unit so that in the case of break-down of power supply, the motor will stop and would not-re-start unless starting switch is operated.

CTM – Plate type, Digital operated, double plunger pumpi) 1500 KN capacityii) 2000 KN capacity  

We are renowned as the reputed Compression Testing Machine Manufacturer & Exporter from Maharashtra, India. We fabricate the range of Testing Machine in line with the specifications provided by our customers to fulfill their varied industrial requirements. We have developed a large distribution network to ensure timely delivery of Compression Testing Machine across the world.

Compression Tester, Conair AC Gas Charging Machine, Foot Operated Bike Lif

Cube Compression Testing Machine, Surveying Instruments, Slump Test Apparatu

Compression Testing Machine Hand Operated for Compression test on Concreteor similar materials. Suitable for use on Concrete Cubes of any size up to 150 X. 150 high Concrete Cylinders. The load is applied thru hydraulic assembly. The lower platen is on the Hydraulic ram, an upper having a spherical seating is adjustable. The machine is provided with an air release valve and the load is automatically indicated on the 15 cms dial,  hydraulic pressure calibrated against an N.C.B.M. tested Proving Ring and fitted with a legless max pointer in addition to the ‘live’ pointer.

Compression Testing Machine, Testing Machin

Compression Testing Machine, Brinell Hardness Testing Machin

Calibration of Compression Testing Machin

Motorized Compression Testing Machine Cap 200MT (200kN). Model CCT-7/6 Complete with three pressure gauge, as Per enclosed leaflet. .