Electronic Development Boards Dealers in Pune (66 products available)

• FPGA: Spartan3E XC3S250E/XC3S500E
• Flash: M25P20
• LED: 64 LED
• Switches: 64 DIP Switches
• Segments: 6-7
• Flash: 8Mb
• Oscillator: 12MHz
• JTAG: Need external JTAG
• Gpio: GPIO No
• DDR: NO
• USB Powered: No
• Customization Available: Yes( We Can Print Your Name On Board)
• Warranty: 1 Year

we have provided solutions using rpi ,arduino,bb and custom embedded boards like avr,microchip etc.we can provide solution using verious wireless technologies like lora,bluetooth,xbeee,wifi ,rf etc.   would like hear from you the requirement and we will provide you a solution..

• Country of Origin: India
• Shape: Rectangular
• Application: Education
• Feature: Durable, Easy To Fit

VSET-AV-01 LED TV Trainer has been designed with a view to provide theoretical and practical knowledge of a general High Definition TV and Gain the Knowledge about all parts like IC, speaker, PCB Board etc. It Provide a way to fully analyze LED TV.   Scope of Learning:-   Unit Objective Preventive maintenance of a LED Understanding control panel settings. Hardware Monitoring Study of power supply pin-outs Study and analyze analog signal on speakers Study and analyze signals on keypad interface Study and analyze AV signal with faults Study and analyze VGA signals with faults Study and analyze IR remote signals with faults Study and analyze LVDs signals with faults Study and analyze main board of LED TV Trainer        

Avr development board v1.0 integrates atmega32a microcontroller which uses risc core. Atmega32a is low-power cmos 8-bit microcontroller based on avr family of microcontroller. This board specially designed for beginners by keeping hardware complexity as minimum as possible and its a real value for money.

• Max. I/o Points: 238
• Program Capacity: 4k Steps
• High-speed pulse output: Supports 2-point (Y0, Y1) independent high-speed pulse output of up to 10KHz.
• Built-in: 4-point high-speed counter
• Mpu Points: 20 (8di/6do, 4ai/2ao)
• Usage: Industrial

• Brand Name: VSOFT
• Packaging Type: Wooden Box
• Weight: 1 Kg
• Surface Finishing: Wooden
• Phase: Single

• Applications: Weighing systems,Tension measurement systems, Load balancing in a mechanical system
• Lodcells connectable: 6 nos
• Output: Average of loadcells connected
• Loadcell input: max 30mV

This unit is very useful to average the loadcell signals received from 642 loadcells. In a weighing system more than one loadcells are used for balancing purpose. In such situation the averaging circuit averages the signals connected to the unit and gives averaged mV signal. If suppose in a system four loadcells are connected. If measured individual signal of loadcells it is found to be 10.5mV, 10.6mV, 10.5mV and 10.4mV. If these loadcells are connected to the averaging circuit then the output will be 10.5mV. Excitation voltage is to be connected to the unit. There is provision of connecting 6 loadcells. Excitation voltage of each loadcell can be fine adjusted. This adjustment is to adjust output from a loadcell.

• Memory: 1024 Kb
• Phase: Single
• Usage/Application: Motor Drive and Control
• Display Type: LED
• Frequency: 50 Hz

The LGS PIC-DVK allows you to have a well known and documented hardware both under electronic and under software point of view. This kit/ Development board can be use for simple experiments, to advance experiments Features: Experimental board for Microchip’s PIC 16 & 18 Family of microcontrollers supplied with PIC18F4520 (Any 40pin PIC Microcontroller is compatible) 40 pin ZIF socket for Microcontroller ICSP Programming (ISP) facility through on board PIC PIC KIT3/PIC KIT2 Provision through USB port prog. Crystal frequency: 16Mhz 10pin x 5 polarized FRC header with Gnd & VCC On-board RS232 Serial Interface x 1 nos. terminated in a 9-Pin ‘DB9’ male connector  10pin UEXT connector for easy I2C, SPI and serial device interface On Board L293 Stepper Driver & DC motor Driver  (Stepper Motor and DC motor have to buy separately) 4x4 Keyboard, 16x2 LCD interface I2C EEPROM (24Cxx) – External Memory for Users Onboard PWM Output for user interface SPI EEPROM 25Cxxx and RTC DS1307 On board Relay, Buzzer & LED’s (5nos.) On board 8 LED for study of IO interface Onboard ADC Output to check actual value of the  ADC with soft potentiometer On board DAC Interface Onboard Reset Circuit to reset the MCU with reset monitoring 16x2 LCD display with 4 bit & 8 bit selection 4 digit 7 segment display 32Khz Crystal for on chip RTC with Battery Dual power option ie through USB or 9-12V AC-DC adaptor Optional Interfacing study cards available: Blue Tooth, IR interface, Zigbee etc. Kit Includes LGS PIC DVK Development board with Boot Loader programming onboard Power Adaptor 10 Pin FRC X 4 nos. Serial & USB cable    

• Brand Name: Arduino
• Clock Speed: 84 MHz
• Features: These are compatible with all arduino compatible shields and the arduino ide, It has a standard 6x1 avr isp header, It comes with an atmega328 with a pre-burnt arduino boot loader.
• Operating Voltage: 1.8 - 5.5 V
• DC Current : 800 mA
• Packaging Type: Box
• SRAM: 96 KB

Comprises Micro controller with 3 level safety system, Self diagnosis facility, Ceramic heater, One moulded instrument shelve

• Brand Name: Pakoindia
• Place of Origin: Maharashtra, India
• AEC-6831: Intel Atom Processor
• Model Number: AEC-6850

We are the main supplier of this product.

RadioSecure SLE is a creative innovation for tracking conveyances and assets. In addition to security status, the device is also able to monitor and report environmental parameters like temperature and humidity. Light sensor also available in SLE.

• Features: Precise dimensions, High durability, Optimum quality, Robustness, Perfect finish, Corrosion resistant.

• Brand Name: UL Automation
• Material: PCB
• Application: Power Supply Distribution
• Country of Origin: Made In India
• Protection: Fuse with LED
• Primary Voltage: 24VDC
• No of chanell: 04/08/16

• Application: Laboratory
• Brand Name: Logsun Systems
• Model Number: LGS LPC-1788
• Flash Memory: 512Kb
• Operating Frequency: 120Mhz Max

• Power Supply: 5V

• Model Name/Number: Raspberry Pi 3 Model B+
• Clock Speed: 1.4 GHz
• Operating Temperature Range: -10 to 60 Degree C
• Video and Sound: 2-Lane MIPI DSI Display Port
• GPIO: Standard 40-pin GPIO Header
• Connectivity: Gigabit Ethernet over USB 2.0
• Operating Power: 5V/2.5A DC
• RAM: 1GB LPDDR2

• Brand Name: Ushai Tech
• Voltage: 220 -240 V
• Thickness: 2-5 mm
• Power: 22 KW
• Frequency: 8 MHz (3.3 V model) or 16 MHz (5 V model)

• Size: Standard
• Type: Electronic Circuit Boards
• Color: Blue, Brown, Green, Yellow
• Input Voltage: 12v, 14v, 16v, 18v, 20v, 22v, 24v, 26v, 28v, 30v
• Frequency: 50Hz, 60Hz
• Power: 10-12kw, 12-14kw, 14-16kw, 2-4kw, 4-6kw, 6-8kw, 8-10kw
• Packaging Type: Carton, Paper Box
• Power Source: Electric
• Supply Voltage: 3v, 4v, 5v, 6v
• Board Thickness: 0.4mm, 0.5mm, 0.8mm, 1mm
• Input: AC, DC

VLSI trainer protoboards or kits are extensively used in prototyping of FPGA based product designs, training and for experimental purposes. All of them posses features towards programming of FPGAs and just few user input-output facilities. Very few protoboards offer a complete solution for integration of various user modules with ease. With the advancement in the system requirements and specifications, designers are finding difficulty in development of FPGA based designs. As the FPGA designs accounts the integration of dense memories, analog interface, DSP microprocessors and microcontrollers, many vendors are unable to provide a platform where a designer can integrate all kinds of modules with the FPGA.

• Features: User-friendly,Low maintenance , Easy to use ,Completely tested , Longer working life

• Voltage: 5 V
• External Power Supply Range: 7 V to 20 V
• Layout: Professional Glass PCB Layout
• Boards Support: AVR ATMEGA16, ATMEGA32, ATMEGA8535 Microcontrollers
• Display Type: Two Line LCD Display (2x16), Two multiplexed 7-Segment LED Display

We are offering Electronic Boards. Macart has developed several products related to inkjet printing and is working on many new inkjet technologies.Our research team is highly technically qualified and iis ready to take very challeging Research and development work. In-house Electronic For all our product Mother Boards Motor Driver Boards Head Carriage Board

We are offering best embedded controller.

pcb electronic circuit board, Electronic Items, pcb electronic circuit boards