Electrostatic Precipitators Dealers in Pune

• Motor: 0.5 HP
• 0.5 HP: Overall Dimentions in mm

Electrostatic Precipitator consists of filtrations & Blowers chamber,Contaminated air is drawn in to the Precipitator, It first passes through a mechanical filter which collects larger partics. The air is than passes through Ionizer where it is subjected to an intense electrostatic field. All the oil mist & Smoke particles receive a strong electrical charge. These charged particle the collector cell having metal plates of opposite electric charge. The grounded plates atttracts & capture the oil mist & smoke particles. An after filter improves air distributions through collections cell and also trops any agglomerated articles that may blow off the cell.

• Efficiency: 99.00%
• Country of Origin: 110-240 V
• Orientation: Horizontal and vertical
• Temperatures: 450 deg C
• Airflow: 40000 m3/h

• Material: Metal
• Application: Industrial
• Feature: Rugged Design, Strong Construction
• Country of Origin: 220V
• Power Source: Electric
• Total Carbohydrate: 1 Yr
• Automation Grade: Automatic

• Volume Range: 1000 – 10,00,000 m3/hr
• Temperature Range: 45-1200 Deg Celcius
• Outlet Emission: 10mg/Nm3 to 15 mg/Nm3
• MOC: M.S/S.S
• Efficiency: 99%

Transformer-rectifier systems apply voltages at a defined peak. Modern controls, such as an automatic voltage control minimize electric sparking and prevent arcing (sparks are quenched within 1/2 cycle of the TR set), avoiding damage to the components. Automatic plate-rapping systems and hopper-evacuation systems remove the collected particulate matter on line, theoretically allowing ESPs to stay in continuous operation till annual shutdown.   ECOMAK is capable for delivering Electrostatic Precipitators having gas flow upto 25, 00, 000 Am3/hr with round the clock emission level kept in check upto 30 mgm/Nm3. ECOMAK also provides engineering support and operator training to any project undertaken.

• Number Of Flower: Precipitator
• Application: Industrial
• Power: 1 - 3 kw/1000 cfm
• Motor: 0.5 HP
• Capacity: 500m3-8000m3
• Volume handled: 1000 - 3500000 M3/hr

An electrostatic precipitator (ESP) is a filtration device which removes fine particles, like dust and smoke from a flowing gas using the force of an included electrostatic charge minimally impeding the flow of gases through the unit. In contrast to wet scrubbers which apply energy directly to the flowing fluid medium, an ESP applies energy only to the particulate matter being collected and therefore is very efficient in its consumption of energy (in the form of electricity).Applications : Collection of aerosol particles from wood combustion Petroleum Industry / Diesel Generator Ayurvedic Pharmaceutical School / College / Industrial Chemical Laboratories Fabrication Industries / Welding Shops Casting Industries / Forging Industries Laser Cutting & Plasma Industries For Hotel & Restaurant Smoking Zone

Backed by a team of deft professionals, it has become easy for us to furnish divisive demands of the buyers and that too within shortest time possible. Our stringent quality procedures and analysis as per the guidelines help us in presenting reliable product range.

Our noteworthy entity is highly engrossed in manufacturing and supplying Electrostatic Precipitator. We are based in Maharashtra, India. An electrostatic precipitator is a filtration device that removes the fine particles like dust and smoke from a flowing gas using the force of an induced electrostatic charge minimally impeding the flow of gases through the unit. We precisely manufacture it with the aid of quality-approved materials and updated techniques. We offer it at the prevailing market rate.

• Material: Mild Steel
• Power Source: Electric
• Automation Grade: Automatic
• Country of Origin: 220-280 V
• Application: Industrial
• Brand Name: Purus Filterotech
• Frequency: 50-60 Hz
• Power: 6-12 kW
• Surface Treatment: Color Coated

• Application: ALL TYPES OF OIL AND DRY FUMES
• Automation Grade: Automatic
• Power Source: ELECTRICAL
• Brand: FILTRONIK
• Material of Construction: MS AND ALLUMINUM
• Minimum Particle Size: 0.3 MICRON

Potential fire risks are created if oil smoke layers are formed in ventilation pipes, sensitive equipment like control panels etc.Oil smoke is hazardous and long term exposure can pose serious risks to life.

The Wet Electrostatic precipitator is for applications where the special dust or gas characteristics make separation difficult. The RIECO wet Electrostatic Precipitator (ESP) is reliable and unbeatable since many years in view of operational safety, long life cycle and the collection efficiency. These are excellently suited for fine dust afflicted with water drops or aerosols and emissions containing tar or oil. An added and distinct advantage is the binding and control of toxic emissions like HCl, SO2 and HF fumes.

There was a time when smoke bellowing out of a chimney was considered to be a sign of industrialization. In today’s environmentally cautious age—even the analysis of suspended particles in “visibly clean” gas is mandatory. ESP has proved itself time & again to be the most economical equipment for handling high volume gas. Thus making it the first choice for various industries. With Ever increasing number of industrial processes, the importance of the ESP has   increased considerably. The latest advancements in Electronic Control Systems has proved itself in enhancing the reliability & performance of the ESP’s. IFI brings the latest in ESP Technology right to your door step to fulfill the ever increasing needs of the industry.

• Material: Mild Steel
• Automation Grade: Fully Automatic
• Machine Type: Semi Automatic
• Orientation: Horizontal
• Usage: Exhaust Stream Onto Collector Plates
• Plant Capacity: 1000 Ton
• Power: 1000 HP

There was a time when smoke bellowing out of a chimney was considered to be a sign of industrialization. In today’s environmentally cautious age—even the analysis of suspended particles in “visibly clean” gas is mandatory. ESP has proved itself time & again to be the most economical equipment for handling high volume gas. Thus making it the first choice for various industries. With Ever increasing number of industrial processes, the importance of the ESP has increased considerably. The latest advancements in Electronic Control Systems has proved itself in enhancing the reliability & performance of the ESP’s. IFI brings the latest in ESP Technology right to your door step to fulfill the ever increasing needs of the industry.

The Horizontal Electrostatic Precipitator are the equipment with the horizontal flow design that completely removes the particulate materials deposited on the surfaces and discharge system. The internals in the horizontal electrostatic precipitators are efficiently and continuously washed to remove the particulate with accurate flush system pH. Features High dust removal efficiency No effect of due to high or low electrical resistivity of dust Suitable for the applications requiring a very high degree of gas purity at outlet   Applications Iron and steel plants Chemical industries Non- ferrous metal plants Glass industries Coal and oil fired power plants Glass industries

There was a time when smoke bellowing out of a chimney was considered to be a sign of industrialization. In today’s environmentally cautious age—even the analysis of suspended particles in “visibly clean” gas is mandatory. ESP has proved itself time & again to be the most economical equipment for handling high volume gas. Thus making it the first choice for various industries. With Ever increasing number of industrial processes, the importance of the ESP has increased considerably. The latest advancements in Electronic Control Systems has proved itself in enhancing the reliability & performance of the ESP’s. IFI brings the latest in ESP Technology right to your door step to fulfill the ever increasing needs of the industry.

Electro-Static Precipitators or commonly known as ESPs continue to be excellent devices for control of many industrial particulate emissions, including smoke from electricity-generating utilities, products collection such as cement in cement plants, sinter fine collection in Iron & Steel industries to name a few. The original parallel plate–weighted wire design has evolved as more efficient and robust discharge electrode designs subsequently transformed into a more efficient and robust discharge electrode design of pipe and spike discharge electrode, maximizing corona production. Transformer-rectifier systems apply voltages at a defined peak. Modern controls, such as an automatic voltage control minimize electric sparking and prevent arcing (sparks are quenched within 1/2 cycle of the TR set), avoiding damage to the components. Automatic plate-rapping systems and hopper-evacuation systems remove the collected particulate matter on line, theoretically allowing ESPs to stay in continuous operation till annual shutdown. ECOMAK is capable for delivering Electrostatic Precipitators having gas flow upto 25, 00, 000 Am3/hr with round the clock emission level kept in check upto 30 mgm/Nm3. ECOMAK also provides engineering support and operator training to any project undertaken. Other Electrostatic Precipitator offerings by ECOMAK are: A) Retrofitting of Electrostatic precipitator. B) Conversions: Hybrid ESP: Partial conversion of Electro-static Precipitator to Baghouse. Complete Conversion: Conversion of Complete Electrostatic Precipitator to Baghouse. C) Services: Audit for review & improvement Audit for component life enhancement or component replacement.

An electrostatic precipitator (ESP) is a particulate collection device that removes particles from a flowing gas (such as air) using the force of an induced electrostatic charge. The charged particles are attracted to and deposited on plates or other collection devices.

Electrostatic Precipitators, Dust Collector

Electrostatic Precipitators, Industrial Boilers, Heat Recovery Syste

Electrostatic Precipitator, Shell Tube Boiler, Boiler Steam Dru

Electrostatic Precipitator (ESP) is a flagship product of Thermax Enviro and more than 2000 ESPs are working successfully in India and overseas in various sectors viz. power plants and process boilers, cement, steel, non-ferrous metallurgical, fertilizers, tyres and tubes, paper, chemicals, textiles and food & beverages etc.

Two Stage Electrostatic Precipitator, Central Cooling System

Electrostatic Precipitator, Welding Smoke Filters, Room Air Purifier

Electrostatic Precipitator, Pneumatic Conveying Syste

Electrostatic Precipitators, Dust Collectors, Bag Filters, Screw Conveyor

An electrostatic precipitator (ESP) is a particulate collection device that removes particles from a flowing gas (such as air) using the force of an induced electrostatic charge. The charged particles are attracted to and deposited on plates or other collection devices.

Electrostatic Precipitators, Bag Filters, Wet Scrubbers, Filter, Gas Cooler

Electrostatic Precipitator, Air Pollution Controlle

Electrostatic Precipitator, Bio Mass Power Plan