Flap Valves Dealers in Pune

Double Cone Flap valves are used for controlled feeding as well as achieving air lock sealing. These valves consist of two independent Cone Flap valves mounted one upon other with their opening and closing alternated and synchronized to ensure that only one valve opens at a time. DEMECH manufacture these valves to suit the opening sizes and required through-put rate. The through-put of these valves depend on the holding volume of the upper valve chamber and the rate of operations.

We are leading manufacturer and exporter of Flap Valves Manufacturers, Flap Valve, Flap Valve Manufacturer, Manufacturer and exporter of Flap Valve, Flap Valve Manufacturer In india.We are Offering Flap Valves, Bolt cover,structure of flip-chip balance able pressure and light onoff operation.An oil grove is set between valve body and seal surface,which may infuse the seal grease to increase the seal capability.

Double Cone Flap valves are used for controlled feeding as well as achieving air lock sealing. These valves consist of two independent Cone Flap valves mounted one upon other with their opening and closing alternated and synchronized to ensure that only one valve opens at a time. DEMECH manufacture these valves to suit the opening sizes and required through-put rate. The through-put of these valves depend on the holding volume of the upper valve chamber and the rate of operations. These are very slow operating valves as the operation cycle rate does not usually exceed beyond 6 cycles per minutes. Thus these valves have a batch feeding pattern rather than continuous feeding. Selection of Cone or Flap depends on the characteristics of material to be handled and system requirement like pressure sealing. Cone valve has a better sealing than the Flap valve. However, in smaller size valves the Cone can act as an obstruction in the flow resulting in clogging of the small opening. The Cone valves usually have round opening whereas the Flap valves can have square.

Double flap valve is continuous material discharge equipment. Double Flap Valve has a two door flap plate which open and close alternatively. As the material falls on the top plate, during continuous operation the plate opens and discharges the material on the bottom plate. After discharging the material the top plate closes. This ensures that the DFV is sealed to prevent air leakage. The bottom plate then opens after the top plate is closed and allows material to fall onto onward collecting equipment. The cycle time is precisely adjusted such that after the bottom plate closes the top plate opens. Thus ensuring continuous air sealing across the DFV. The time for which both flap are in closed condition, is known as dwell time.

Indpro Diverter Flap Valves are manufactured using CNC laser cut portion. The flap is either activated by a manual lever, a pneumatic or an electric actuator.   FEATURES Indpro Diverter Flap Valves have one inlet and two outlets for the diversion of the flow of powdery or granular materials. Materials used enable quick cleaning and maintenance. Rubber type seal ensure minimum leakage & minimum residue

Slide Gates are used to control and isolate the discharge of bulk materials from hoppers, bins, silos or conveyors. Slide Gates consist of a rigid frame mounted to the bottom of the storage device or conveyor. A slide plate is located inside the frame that either opens or closes against the flow of material. The slide plate can be moved by manual, pneumatic, electric or hydraulic means. The slide plate being a wear component is made from high wear resistant material & can be offered in various MoC’s.

The Flap Type Gravity Diverter comprises of flap enclosed in body which is key component in supporting diversion of product. This arrangement is used when product coming from top of diverter is to be diverted in vertical direction and angle between diversions of valve is up to 30˚ and 60˚. In above case, only one diversion is in operation and other is closed. In other words, the material can be conveyed from inlet to straight position or inlet to diverted position of diverter at a time. The basic design is for diversion of product coming down due to gravity.

Flap Valve, Double Flap Valves, Flap Diverter Valve, Slide Gate Valv

Double Flap Valve, Slide Gate Valve, Butterfly Dampers, Poppet Dampe

Double Flap Valves, FRP Scrubber, Gas Scrubber, Wood Dust Collecto

We are offering double flap valves.

Double Flap Valve, Cast Basalt Pipe, Enmasse Conveyo

Gravity Operated Double Dump Flap Valves, Bag Filter Fan