Hardness Testing Machine Dealers

Our expertise lies in designing and manufacturing Rockwell Hardness Testing Machine. Rockwell Hardness Testing Machine is basically used to check the hardness of different kinds of metals. In the making of Rockwell Hardness Testing Machine, we use superior grade components so that its performance and function are completely reliable. Besides, the entire assortment of our Rockwell Hardness Testing Machine is made according to the industry set norms and standards.   Features : Rockwell, Rockwell Brinell Combined, Rockwell / Rockwell Superficial Combined System Hardness Testers. Hardness Testers, Model RAS, RAB-1, RAB-250, TWIN are manually operated. All these models are suitable for testing hardness of metals sand alloys of all kinds hard or soft, whether flat, round, or irregular shape. These testers are simple in design and easy to operate, yet sensitive & accurate. Various models from the wide range are suitable for schools, laboratories, tool-rooms, inspection, heat treatment departments, factories etc. These testers strictly confirms to IS : 1586 - 2000, ASTM : E 18 for Rockwell Superficial Test and IS : 2281 - 2005, ASTM : E 10 for Brinell test.

We are counted among well-reckoned Manufacturers, Exporters and Suppliers of a wide array of Rockwell Hardness Testing Machine. Buyers can purchase the Rockwell Hardness Testing Machine from us at competitive prices. We provide Rockwell Hardness Testing Machine in varied specifications and ensure they are as per buyer’s requirement.

For Rockwell, Rockwell Superficial & Brinell Testing) Principal : Rockwell & Rockwell Superficial tests consists of forcing an indentor (Diamond or Ball) into the surface of a test piece in two steps i.e. first with preliminary test force and thereafter with additional test force and then measuring depth of indentation after removal of additional test force (Remaining preliminary test force active) for measurement of hardness value.Brinell test consists of forcing a hardened ball into surface of a test piece with a specified test-force and measuring the diameter of indentation for evaluation of Brinell hardness number.   Operation : For Rockwell & Rockwell Superficial Test : In case of 'RASN' series machines for Rockwell & Rockwell superficial tests a preliminary test force in first applied and then indicator is automatically set for zero. Quickly thereafter an additional test force is applied without removing the preliminary test force. When the penetration is stabilised, the additional test force is removed and the hardness number is shown directly on the indicator.   For Brinell Test : The operation is exactly same as above. However, the diameter of impression is measured outside of machine by Brinell microscope. Brinell hardness number is found out by referring corresponding hardness tables showing hardness number against dia. of indentation for specified ball diameter and test force.     Rockwell System Hardness TesterModel : RASN• Suitable for Rockwell Tests.• Manually Operated.• Preliminary Test Force - 98.07   N (10kgf).• Additional Test Force - 490.3, 882.6,   1373N (50.90, 140 kgf).• Total Test Force - 588.4, 980.7, 1471N    (60, 100, 150 kgf).• Test Force Selection by    external dialing.• Auto zero setting dial gauge. Rockwell cum Brinell Tester, Model RASN (B)• Same as RASN above in additional• Additional Test Force - 1471, 2354N    (177.5, 240 kgf) • Total Test Force - 1839, 2452N    (187.5, 250 kgf)       'RASN' series of Hardness Testing Machines come with much improved design and look with following major design changes.   The machine body is having a taper front look and a big size dial gauge in the front. The machine is powder coated for far better look. The paint shade do not fade and machine  looks like new over year. The elevating screw of machine is guided in a hardened and ground bush, not allowing movement of elevating screw more than 0.05 mm when raised to full height. The accessory is returned for years together due to hardened bush.  A hardened and ground stepped bush is fixed on top of main screw for location and rest surface. This guarantees no change in results due to rough handling of test table or test piece. It means a trouble free long life machine accuracy. An antifriction linear bearing with almost no clearance is provided for a perfect vertical movement of loading plunger with minimum friction. This enable testing of small dia. pin or ball upto 3 mm dia. All machine models are provided with automatic zero setting dial gauge or digital readout. Hence zero setting at every test is avoided. All four models confirm to respective standard as under.   • IS : 3804, BS 10109-2 & ASTM E-18 for Rockwell Test.   • IS : 5073, BS 10189-2 & ASTM E-18 for Rockwell Superficial Test.   • IS : 2281, BS 10003-2 & ASTM E-10 for Brinell Test.     Rockwell Cum Rockwell SuperficialHardness Tester Model : RASN ( T ) • Suitable for Rockwell & Rockwell    Superficial Tests.• Manually Operated.• Preliminary Test Force - 29.42,    98.07N (3, 10kgf).• Additional Test Force - 177.7, 264.8,    411.9, 490.3, 882.6, 1373N (12, 27,   42, 50,    90  & 140 kgf).• Total Test Force - 147.1, 294.2, 441.3,    588.4, 980.7, 1471N (15, 30,    45, 60,100,   150 kgf).• Test Force Selection by external dialing.• Auto zero setting dial gauge.   Motorised Rockwell System Hardness Tester Model : RASN ( M ) • Suitable for Rockwell Tests.• Motorised for automatic Operation cycle    i.e. load / dwell / unload.• Preliminary Test Force - 98.07N (10kgf).• Additional Test Force - 490.3, 882.6,    1373N (50, 90, 140 kgf).• Total Test Force - 588.4, 980.7, 1471N    (60, 100, 150 kgf).• Test Force Selection by external dialing.• Auto zero setting dial gauge.                                 Optional Accessories :   • Steel Ball Indentor 1/8", 1/4", 1/2"• Testing Table 200mm dia.• Testing Table 70mm dia. with 'V' groove for round jobs 10 to 80mm dia.• Vari-rest to support odd shaped jobs.• Jominy test fixture for end quench test.• Gooseneck Adopter No.1• Special Diamond Indentor suitable for Gooseneck Adopter No.1• Short nib diamond indentor suitable for Gooseneck Adopter No. 1• Gooseneck Adopter No. 2 • Special Diamond Indentor suitable for Gooseneck    Adopter No.2• Gooseneck Adopter No. 3 • Raised centre testing table 15mm dia.• Diamond spot anvil.• Cylindron anvil for testing big jobs above 20mm dia.• Eyeball anvil with 25.4mm dia or 38mm dia. ball• Gooseneck anvil for pipes 5 to 25mm ID with 5mm    step inserts• Jack rest for long and heavy jobs.

Vickers Hardness Testing Machine, Vickers Hardness Teste

Hardness Testing Machines, Brinell Hardness Tester, Hardness Teste

Rockwell Superficial Hardness Testing Machin

Computerized Brinell Hardness Testing Machine