Industrial Heaters Dealers in Chakan, Pune (77 products available)

• Material: Steel
• Finishing: Coated

FLASH POINT IFWBH Gas Fired Indirect Water Bath Heaters are skid mounted , factory assembled, fully tubed & wired units designed in full compliance to API 12K used to heat natural gas and oil .The fuel gas piping system of Flash Point Indirect Fired Water Bath heaters is designed in accordance with the latest edition of ASME B31.3 . Every component of the water bath heater is hydrostatically tested to at least 1.5 times the design pressure .

• Material: Stainless Steel
• Finishing: Powder Coating
• Heating Temperature: 200 Degree C
• Accuracy: 0.5 Degree C

• Features: Reliable,Durable,Precise

We are one of the leading Manufacturers and Suppliers of Boiler Superheater. Our device is used in a steam engine that heats the steam generated by the boiler. Our range is available in various sizes and can also be customized as per the application needs of our clients. Owing to its smooth functioning and great performance, it is profusely demanded by our clients. We offer it at a reasonable rate. Some of its features include: Increases the efficiency of the steam engine Eliminates corrosion of the steam turbine Increases the capacity of the plant Reduces the steam consumption of the steam turbine

• Country of Origin: India
• Type: Quenching Machine
• Condition: New
• Automation Grade: Automatic
• Country of Origin: Made in India
• Frequency: 50 Hz
• Phase: Three Face
• Output Current: 300 Kva

Anti Roller Bars Heating with 3 phase Dc upto 300 Kva upto 1000̊C and lifting and dropping on conveyor chain for quenching in oil tank for heat treatment. Can also be used for heating & bending.

Resin casting is a method of casting where a mould is filled with a liquid synthetic resin, which then hardens. The synthetic resin for such processes is a monomer for making a plastic thermosetting polymer. During the setting process, the liquid monomer polymerises into the polymer, thereby hardening into a solid. Our resin casting plant is manufactured using quality components and spare parts to ensure optimum performance and long functional life.

• Capacities: From 2 LacKcal/hr to 30 Lackcal/hr
• Firing fuels: coal, wood, sawdust, Husk, baggase, agro waste

We offer thermic fluid heaters, fired by a wide range of fuels. Our TFH are available in both solid fuel firing as well as oilgas firing versions so that user gets the advantage of economically available fuels. All TFH are made with a coil type design ensuring instant heat. We offer fuel options of heavy oil, light oil, gas, dual fuel, wood, coal, husk, bagasse and other agro-waste fuels.These models are designed for maximum efficiency, using a variety of solid fuels including agro-waste fuels. It allows high process temperatures at low operating pressures.

• Capacities: From 2 LacKcal/hr to 30 Lackcal/hr
• Firing fuels: coal, wood, sawdust, Husk, baggase, agro waste

We offer thermic fluid heaters, fired by a wide range of fuels. Our TFH are available in both solid fuel firing as well as oilgas firing versions so that user gets the advantage of economically available fuels. All TFH are made with a coil type design ensuring instant heat. We offer fuel options of heavy oil, light oil, gas, dual fuel, wood, coal, husk, bagasse and other agro-waste fuels.

• Furnace Type: Electric Resistance
• Approx. Hold Capacity (kg): Aluminium – 300 / 500
• During Melting unit per kg: 0.5 – 0.55
• During melting unit per hour: 13 -15
• Maximum Coil Capacity: 50kw – 78 kw

Ceramic Bobbin elements are fitted in a metal tube for applications in liquids, ovens (in this case a robust construction is essential) They find a variety of applications in Industry. Can be manufactured in various diameters, lengths, kW ratings, and operating voltages.

35-watts/square inch (5.4 watts square centimeter) 240 volts standard, 415 and other voltages available. Choice of steel, stainless steel (304 and 316) and titanium sheath materials. For plating tanks, rinse tanks and other aqueous solutions. Low watt density models available for phosphatizing and concentrated aqueous solutions. Single-phase standard, three phases available as an option. Features: Heavy duty, long lasting construction. Standard thermal protection (replaceable heater). Grounded for safety. Vapor tight terminal enclosure. Bottom mount designs available for even heating and varying solution levels. Pipe OD from 40 mm to 65 mm TUBULAR IMMERSION HEATERS IN VARIOUS SHEATING MATELS 10 TO 15 watts/square inch nominal 120, 240, 480, volts standard, Compatible with most plating tank solutions, inert to acids, anodizing and pickling solutions up to 212 degrees Fahrenheit (100 degrees Celsius) temperature. Round u shape z shape L-shaped configurations available to meet your application. Heater are available in various sheathing SS 304, SS 3416, SS 316L, MICOLOy 800, INCOLOY 600 Titanium, 99.9 % pure lead   Features: Low watt density for even heating and long service life. Grounded internal metal element for safety. Lightweight, non-floating construction. Vapor tight terminal enclosure. Single or three phase models available. Custom lengths available. Consult factory. Flexible leads available. QUARTZ IMMERSION HEATERS 26-watt/square inch (4watts/square centimeter) nominal. 240, 415 volts standard, and other voltages available. For plating tanks, pickling and other acidic aqueous solutions. Not for use in hydrofluoric acid or alkaline solutins. Single-phase standard, Features : Heavy duty, long lasting construction. Heating elements and/or quartz tube assembly replaceable. Vapor tight rubber terminal enclosure

• Tank Capacity: 3tph to 300 tph
• Material: Stainless Steel & mild steel
• Outer Diameter: 0.5 m to 6 m
• Material Grade: Sa 516 gr.70 & is 2062 gr.b
• Finishing: Painting
• Minimum Order Quantity: 1 Unit

The management team at Ferrotherm is well experienced and sufficiently equipped to produce high quality Induction Heating Equipments at most competitive price. Over the years management team of Ferrotherm has established a very respectable reputation in forging industry.

Steam Heaters are heat exchangers in which one of the media is steam being condensed while the other is a process fluid being heated. Metapow is a leading manufacturer, supplier and exporter of steam heaters in Bhosari, Pune, India.

We Manufacturing High Quality Hot Water Gnerators, Our Hot Water Generator Come With Robust Construction And Easy Operation For Direct & Indiredct Firing.Wide Range: 30,000 Kcal/Hr to 30,00,000 Kcal/Hr.Heat Output: UP to 120 Deg.CFuel:- Solid fuel, LDO, FO, LSHS, Electrical & Etc. Description The hot Water generators are offered in vertical or horizontal designs, either as standard models or tailor-made models to match customer's specifications and applications. Designed in DIRECT and INDIRECT heating types, these systems are practically free from any maintenance and are highly efficient. Salient Features of the Hot Water Generators are Durable construction Easy operation and minimal maintenance High level of safety in operation, thus greater reliability Optional recirculation system to improve overall thermal efficiency Fully automatic burner control and temperature control Units are available from capacities of 30,000 Kcal/hr to 30,00,000 Kcals/hr. Imported & indigenous burners can be supplied with various firing options like light oil, heavy oil & gas. Units can be manufactured in various materials of construction like SS. Units can be supplied with optional imported burners.

• Brand Name: enersys
• Minimum Order Quantity: 1 Unit

• Country of Origin: Made in India
• Voltage: 240 V
• Material: Stainless Steel
• Power: 250 W
• Shape: Strip Type
• Width: 60 mm

Alliance Thermal Engineers designs & manufactures Electrical Heat Treatment Equipment of various ranges for Preheating & Post Weld Heat Treatment applications of various welded fabrications/ pipe joints etc.The equipment basically works on the principle of Electrical Resistance Heating method & is very much superior to the conventional wire & bead method, which is now becoming obsolete. Low Voltage of 60V / 80V is utilized for the heating elements. Low voltage system has many advantages over other heating system working on mains supply of 230V.Various Advantages are: It gives more flexibility in operation. Avoiding higher voltages on the job, giving total safety to the operator. Uniform temperature distribution. Optimum heat penetration etc. Thus, a full Heat Treatment Equipment set shall comprise of: Power Source – 40 / 50 / 70 / 96 kVA with 3 way, 6 way or 12 way control. These are available in Trolley Type Mobile Unit, ideally suited for construction / erection sites, workshops, power plants etc. Low voltage heating elements – 60 / 80V – Flexible Ceramic Pad Type, available in various sizes They provide heat, through conduction heat transfer for preheat / PWHT of welded joints. The heat conductivity is excellent & electrical strength is high at elevated temperatures. The heating elements can be simply wrapped around the pipes or jobs and secured in position with strips. For pipe joints of different dia. / thk., you can use combination of different sizes of elements of same rating. The element tails are connected to the power source by suitably rated cabling system. Cabling system – Feed, return, 2 way, 3 way, 4 way splitter cables between Power & the heating elements, Temperature measurement & Recording system :Temperature Recorder - This is portable unit for recording preheat and post heat temperatures up to 1200 Deg. C.Thermocouple wire - is used to measure temperature and monitor the control aids. Thermocouple wire is of nickel chrome / nickel alumel or K-Type, twin 21 / 22 SWG wire asbestos covered and normally supplied in 100 m roll.Thermocouple Attachment Unit - is used to attach a thermocouple to the weldmet. Fully Automatic Multi Channel Programmers – to program the preheating & PWHT cycle, Compensating cables are used to connect each thermocouple to the respective channel of the temperature recorder. All spares & accessories for the above. Different models are available based on client’s specific requirements, with Manual or Auto mode of operation.For bigger heat treatment requirements, Mains operated 230V heating elements like Flexible pads or 4 Bank Channel Elements, Finger Elements are also available.These equipment are used in all industrial sectors like thermal/hydel Power plants, fertilizer / chemical / refineries / steel & general engineering plants.   FCP – Low Voltage Flexible Ceramic Heating Elements.FCP03 – Typical Application of Low Voltage FCP’s for Preheating/PWHT of Pipe Weld Joints.6 Channel Stress Relieving ProgrammerFIP – Flexible Insulated PreHeaters for Preheating Applications.Power Source – 60 kVA Power Source, 6 Way.

Thermin Power provide non-pressurised and pressurised Hot Water Generaters both shell and tube and coil type construction. The system is of maximum thermal efficient in the market.  

Typically, the flue gases leaving a modern 3-pass shell boiler are at temperatures of 200 to 300 °C. Thus, there is a potential to recover heat from these gases. The flue gas exit temperature from a boiler is usually maintained at a minimum of 175 °C, so that the sulphur oxides in the flue gas do not condense and cause corrosion in heat transfer surfaces. When a clean fuel such as natural gas, LPG or gas oil is used, the economy of heat recovery must be worked out, as the flue gas temperature may be well below 200°C.   The potential for energy saving depends on the type of boiler installed and the fuel used. For a typically older model shell boiler, with a flue gas exit temperature of 260°C, an economizer could be used to reduce it to 200°C, increasing the feed water temperature by 15°C. Increase in overall thermal efficiency would be in the order of 3%. For a modern 3-pass shell boiler firing natural gas with a flue gas exit temperature of 140°C a condensing economizer would reduce the exit temperature to 65°C increasing thermal efficiency by 5%.   Depending on fuel used for firing, THERMIN ENERGY provides bare tube, finned tube, gilled tube Economisers /Water Preheaters.

Feedwater Heater systems can extract up to 30% of the turbine throttle steam. The use of this energy source is critical for efficient generation of electric power. Each feedwater heater is designed to specific thermal conditions and manufactured for a singular purpose. We have the expertise and experience to offer proven solutions to any design problem.

WE ARE SPECIALISED IN MANUFACTURING OF THIS TYPE OF HEATERS.GLASS  Heater ARE WIDELY used IN CHEMICAL INDUSTRIES ,SPECIALLY IN ELECTROPLATING COMPANIES. These are manufactured FROM CERAMIC (BOBBIN)MATERIAL.IN THIS HEATERS WE USE HIGH QUALITY RESISTANCE WIRE.QUALITY OF OUR GLASS IS VERY TOUGH,IT   LASTS  ACCORDING TO THE MODE OF USE OF CUSTOMERS. Applications:  Chemical Industries  Used for most cleaning solutions Alkaline solutions  Anodizing & plating baths  Nitric & chromic acid solutions  Lead bended heater used in water,oil,food stuff

M. E Energy offers Hot Water Generators as a total solution, rather than a product. This ensures that the customers get all the essentials for a trouble free operation.Hot Water Generators are available in the following types: •    Immersion Heater  (from 40000 kcal/hr to 500000 kcal/hr)•    Shell and Tube Hot Water Generator (From 500000 kcal/hr to 5000000 kcal/hr) •    Coil Type Hot Water Generator (from 100000 kcal/he to 600000 kcal/hr) M. E. ENERGY make Shell & Tube Hot Water Generators are Horizontal Smoke Tube type in construction. This design is simple in construction, but robust in design due to its geometry. As in case of our other products, Shell and Tube Type Hot Water Generators are supplied as an integrated system inclusive of accessories like Pumps, Valves, Combustion System, Chimney etc.. The systems can be configured to meet the customer’s requirements like specified makes of pumps or burners etc. or installed within a given space availability. Features of our Shell and Tube Hot Water Generators are :•    Substantially lower operating costs •    Easy maintainability•    Robust construction •    Lower headroom requirement•    Lower total cost of installation etc.. These features make our Shell and Tube HWGs superior to the coil type water tube heaters available in the market.

• MODEL: Supply Voltage at 1 ph. 50 Hz , Input power at Max. current
• UNITS: V , KVA
• TBH-25: 415 , 25
• TBH-50: 415 , 50

The Electric Resistance Heating is the least expensive way to change electricity into heat in any metallic object. In a furnace, the entire furnace has to be heated, the elements have to be heated, which in-turn many times heat a muffle which in turn heats the part in which heat is desired. Resistance heating is a more direct method of producing heat only in the object in which heat is needed. Just a few of the applications would be; wire drawing, extruding, warm or hot heading, brazing, forging, upsetting, roll parts, heat treating, heating strip stock for shearing, for forming, drawing and rolling, soldering and general purpose heating. TECHNICAL DATA

Immersion Water Heater, Solar water heater pipe, water geysers

• Voltage: 440 V
• Power: 30 kW
• Country of Origin: Made in India
• Length: 1200 mm
• Frequency: 60 Hz
• Usage/Application: Industrial
• Brand: Kalyani Enterprises
• Features: User friendly, Low energy consumption, Easy to use.

• Voltage: 415 V
• Country of Origin: Made in India
• Is It Portable: Portable
• Input Power: 25 KVA
• Switch Fuse: 80 A
• Current Taps: 6 No.
• Duty Cycle: 100 %

heat treatment equipment, electroplating equipment