Metal Alloys Dealers in Pune

We are Fabricating and supplying Titanium Equipments and it's components as per customer drawing and specifications. The Equipments and components are like Heat Exchanger, Chemical storage tank, Heating & Cooling Coil, Thermowell, Flange, Fasteners, etc.     Material : Gr.1, Gr.2, Gr.3, Gr.5, Gr.7, Gr.9, Gr.12, 6Al-4V, 6Al-4V ELI     Application : This superalloy is used in a variety of industries such as aerospace, chemical processing, marine engineering, pollution-control equipment, and nuclear reactors

We are offering high quality copper scrap,copper wire scrap, aluminum alloy, aluminum scrap. All aluminum item dealers stockist of ferrous non ferrous metals,products>aluminum & aluminum products>other aluminum products metal & metal products>aluminum & aluminum products>aluminum bars & rods metal & metal products>aluminum & aluminum products>pressure cookers of aluminum alloys metal & metal products>iron & steel>metal scrap ,nickel scrap,copper cathode,we have been in this line for more than 20 years. Our monthly capacity is 5000 mt, about 560 peoples.

In TIG welding, the arc is struck between the workpiece and the non-consumable electrode like thoriated tungsten for welding of ferrous materials and zirconated tungsten for aluminum. The consumable wire is melted in the arc atmosphere and the inert gases like argon or helium or their mixture are used as shielding gases. TIG is extremely suitable for joining thin sheets and tubes, and for making root pass welding in pipes, since the heat input in this process is minimal. TIG welds do not cause any undercuts or excessive penetration and give smooth welds. TIG welds provide superior quality weld metal, but the productivity is low.

Brazing Wire and fluxes:.Brand : Available in Reputed brands, Ag:58-61, Solidus:695,Liquidus:730, BS-1845:AG13, DIN-8513:L-Ag60, BRAZING FLUX:SILMUX - T. We also specialize in manufacturing and supplying welding consumables for fabrication, maintenance, repair welding & hard facing surfacing applications.

Silica manganese is an alloy of Iron, Silicon & Manganese. It has higher Silicon content in comparison to Ferro Manganese. Silicon reduces the solubility of carbon in manganese alloys, so carbon contents are inversely proportional to silicon content. It is a more potent deoxidizer of steel compared to Ferro manganese. Deoxidization with SiMn results in cleaner steel than using Ferro Silicon.

This model's holder made of high strength-zinc alloy is connected in perpendicular to the ball shank. With grease pockets provided on the top and bottom of the spherical area, this model achieves high lubricity and high wear resistance.

Tungsten Heavy Alloys from Density 15-18.5 gcc andUTS from 500-950mpa, E-3.22Compressive Strength 2000Mpa Higher Hardness As per Customer Requirement CustomizedTungsten Heavy Alloys Product as per Drawing We develop Tungsten Heavy Alloys Product as per Drawings

ECOMAK offers a wide range of products for Fume/Gas cooling systems, PRIMARY fume extraction system and SECONDARY Fume Extraction System in the following areas for Iron & Steel Industry: Induction Furnace (IF) Electric Arc Furance (EAF) Ladle Refining Furnace (LRF) AOD/LD Convertors Blast Furnace Coking Plants Sintering Plants Material Handling Plants Coal Grinding Plants Metal Recovery from Slag

RANGE : 15 NB UP TO 100 NB IN 2000 LBS , 3000 LBS , 6000 LBS & 9000 LBS , 150 LBS , 250 LBS.FORM : SOCKET WELD FITTINGS :: ELBOW 90 DEG , CROSS , TEE , ELBOW 45 DEG , COUPLING , HALF COUPLING & END CAP. Nickel AlloyASTM / ASME SB 564 UNS 2200 ( NICKEL 200 ) ,UNS 4400 (MONEL 400 ) , , UNS 8825 INCONEL (825) , UNS 6600 (INCONEL 600 ) , UNS 6601 ( INCONEL 601 ) , UNS 6625 (INCONEL 625) , UNS 10276 ( HASTELLOY C 276 )ASTM / ASME SB 160 UNS 2201 (NICKEL 201 ),ASTM / ASME SB 472 UNS 8020 ( ALLOY 20 / 20 CB 3 ).Copper AlloyASTM / ASME SB 61 UNS NO. C 92200 & ASTM / ASME SB 62 UNS NO. C 83600.ASTM / ASME SB 151 UNS NO. 70600 , 71500 , C 70600 ( CU -NI- 90/10) , C 71500 ( CU -NI- 70/30) ,ASTM / ASME SB 152 UNS NO C 10100 , C 10200 , C 10300 , C 10800 , C 12000, C 12200.

Inserts with a positive basic shape and sharp edges should always be used. Use the AL-geometry. GC1115 is a high wear resistance, recommended for roughing. H10 is uncoated and is the first choice grade in most cases, from roughing to finishing. For finishing under stable conditions, the polycrystalline diamond (PCD) tipped insert grade CD10 is recommended. CD10 withstands built-up edge better than carbide grades. It provides a good surface finish and also a longer tool life.

Gunmetal, Gun Metal, Alloy Steels, Wrought Iron Component

Lead Alloy, Copper Tube, Stainless Steel Alloy, Tin, White Metal Allo

Nickel Silver, Nickel Iron Alloys, Black Nickel, Nickel Plate

Nickel Aluminium Bronze Non Ferrous Alloys, Welding Machine

Zinc Alloy, Zinc Wire, Aluminium Wire Rod, Solder Bar, Solder Wir

Ferro Silicon Manganese, Copper Wire, Copper Sheet, Copper Ingo

Chromium Alloy, Cooper Alloy, Copper Rod, Industrial Product

Cupro Nickel, Ad Brass, Al Brass, Meta