Monitors Dealers in Bhosari, Pune

• Brand Name: Protocontrol

We are offering microprocessor based speed monitor. Now a day in material handling plants under over speed monitor is one of the essential control and safety device. application: electronic speed monitor is used to monitor speed of conveyors, crushers, rolling mills, agitators, mixers, stirrers, screw conveyors, and other industrial machinery. This device actuates relay contacts at preset speed. Using these contacts desired control action such as zero speed protection under speed protection over speed protection can be achieved. operation: the basic principle of speed monitor is comparison of pulses received from sensor with standard pulses. The unit consists of two parts: "sensor probe" and control unit. The sensor is to be installed with its sensing face in close proximity of rotating object. On this object, flags are to be fixed. The sensor produces strong electromagnetic waves, which get disturbed by the flags, giving rise to corresponding pulses. These pulses are fed to the control unit where they are compared with standard pulses to sense the speed. micro controller based, speed indicator monitor - tachometer features: micro controller based circuitry packed with customer friendly features. Same speed monitor is used for indication of rpm or mpm (linear speed) selectable number of flags: enter number of flags which are available at site, speed monitor will get automatically calibrated for these flags relay contact op for tripping digital display adjustable trip delay settable hysteresis special models for combined under over speed monitoring duty

To decrease the pollution created by the dusty condition of the conveyor, Water spraying is done on the conveyor through the nozzles. when these nozzle are activated, Water is sprayed over the conveyor to settle down the dust. these nozzle are activated when the belt is in loaded condition. Hence, This belt loading monitor plays an important roll of ensuring the belt is running with the load and water is sprayed when the conveyor is running in loaded condition of the Belt.     Operation :   The extension stand of belt Loading Monitor is mounted in inclined position to the action of the spring. So that Rubber Roller remain upward & the proximity switch remain OFF. When the Belt is started with Load (material), The belt will press the Rubber Roller downward thereby lifting the Mechanical Flag in front of proxirnity switch. Than Proximity switch gives the signal that can be used as a sense of Belt Loading condition. This detection of the Roller is between 5mm to 30 mm

Main Features:Smart and fashionable designHigh sensitive and stable functionCompetitive priceCE,FCC certificated Applications:Widely used in the POS, VOD system and the place which needs touch screen function     Detailed Description:Display ratio: 4:3 Pixel pitch: 0.285H*0.285VMax.resolution: 1920*1080/60HZ number of colors: 16.7MBightness: 550cd/m2 Dynamic contrast atio: 1000:1Response time:5ms Humidity:1000,000 timesTe smallest touching object： >2.5mm(Dia.)Durable years :> 7yearsDisplay mode:VGA/TV/SVGA/XVGAPower supply： PS/2 connection / USBSignal input:Analog RGBTouch mode: Resistance touchInstallation：desktop/standard VESA

- Superior Sensitivity of 0.5 pF is standard - Economical, Versatile Point Level Bin Monitor - Simple Electro-Mechanical Operation - Rugged Cast Aluminum Construction Jayashree line of rotary paddle bin monitors consists of the most reliable, rugged and economical point level control sensors available for detection of dry bulk materials. These easy to install units are proven performers in a wide variety of bulk materials. These paddle units can be used to eliminate bin overflow, maintain a predetermined material level, indicate plugging of conveyors and pneumatic lines or provide any of a number of level control functions. Unlike many other available paddle units, Jayashree's paddle level indicators incorporate a feature that automatically shuts off the motor of the unit when the paddle is in a stalled position, which both extends the life of the motor and minimizes maintenance.

GIC’s state-of-the-art Current Monitoring Relays protect your mechanical apparatus from overloading and other conditions that might cause impairment. SUPPLY MONITORING SERIES CMR - CURRENT CONTROL   Protection against Overload, Phase Loss, Phase Reverse and Phase Unbalance faults Wide range of sensing current : 1A - 45A Models for 1 Phase and 3 Phase systems Auto / Manual Reset selection Fail - safe protection Inverse time model with underload, locked rotor protection and selectable trip class Definite time model with underload and selectable start and trip time

Economical, Reliable and Durable Point Level Detection - Low Profile Mounting - Multiple Diaphragm Materials - Over-Pressure Protection - Ultra-Sensitive Switch Option

Vibration monitoring is essential to keeping rotating equipment running smoothly for years. Shinkawa Vibration Monitors are an indispensable complement to equipment like pumps, motors, fans, compressors, and turbine supervisory systems. Monitors are available in single channel, four channel or multichannel versions.

Easy maneuverability Trolley with two solid rubber wheels 63 or 75 (2.5" or 3") monitors can be mounted Water supply manifold with 2 or 4 inlet connections of 2.5" BSP instantaneous coupling Epoxy painted

5 Wire & 4 Wire Resistive Touch TFT-LCD Monitors:  Resistive and 3mm tempered glass options.  Desktop Stand or wall mounting chassis Stable and Long Touch life 12V Input & VGA/DVI interface Features Introduction:This OEM touch monitor families are a flat LCD display with the wide-view angle and the most cost-efficient type. The series of monitors are designed and developed for the application of POS Display, Computers, Data Application, Industrial Control, Medical Equipments, Media Display and Transportation. They provide all the features, such as to support touch screen (Resistive) and VGA signal. With the friendly OSD and multi-languages support, users can freely operate the series of products without struggling. To touch the screen with a finger, fingernail or object such as a credit card and you will receive a fast, accurate response every time.  Specification: I/O Ports VGA Input: 15 Pins D-Sub x1. Plug & Play VESA DDC1/2B Compatible Support. OSD Control Keys: Auto-Adjust, World wide Language menu, decrease and increase. Functions: Brightness, Contrast, Clock, Phase, Horzontal Position, Vertical Position. Power Consumption 25W max. Power 12V Power supply adapter. Net Weight TBD.  Environment: Operating Temperature - 0~40°C Storage Temperature - 20~60°C for standard LCDs Humidity 10~90% non-condensing EMC Approved CE, FCC Safety Approved UL  Display: Size 12.1, 15.1, 17.1, 19.1 availabled Resolution(pixel) SXGA (1024 x 768) Mode TN Response Time(ms) 8 Number of Colors 16.2M View Angle(H/V) H:150° / V:130° Brightness(cd/m2) 250 nits Contrast Ratio 400:1 Lamp Lift(hours) 40,000  * All Touch specifications are subject to be changed without notice.Touchscreen: Type 4-Wire Resistive 

We are offering carbon dioxide monitor model km 601 measures co2, temperature, humidity, and dew point. It is a portable multifunctional tester. Unlike chemical gas sensors the last for few months and must be replaced, km 601 uses non-dispersive infrared diffusion sensors (ndir) which has the long time stability and long life characteristics.

• Application: Industrial
• Brand Name: Sharang
• Voltage: 6-9 V DC
• Color: Black
• Model: ZE107
• Dimensions: 105 x 75 x 30 mm
• Indications: Audible Alarm for Fail Mode
• Weight: 75 gms

Tft monitor, LCD Monitor, touchscreens

Special LCD Monitors designed to be integrated into your kiosk or other enclosure easily. They do not have the usual plastic cabinet to restrict your touch screen or kiosk application. Open Frames are available with mounting brackets and can be simply installed into a kiosk just by tightening the screws. These are available with integrated Capacitive touch screen in 15" and 17" sizes.

• Features: Ease of Frequency setting with simple Addition & Subtraction, LED indications for healthy, unhealthy & no signal conditions, Monitors frequency of three signals - Sine, Square & Triangular
• Frequency Limit Control: 5 Hz to 135 Hz
• Wide Signal Input Voltage: 15 to 500 VAC

• Type: Blood Pressure Monitor
• Application: Blood Pressure Reading
• Color: Creamy, Light White, Off White
• Condition: New, Used
• Automatic Grade: Manual
• Driven Type: Battery
• Feature: Accuracy, Digital Display, Easy To Carry, Light Weight, Low Battery Consumption

Belt Loading Monitor, Vibratory Feeder Controllers, Heavy Duty Limit Switches

ip monitoring, TIME ATTENDANCE, Software Solution, office security

monitor, RAM

emission monitors, compressed air drain traps, Steam Operated Condensate Pump

wrist type blood pressure monitors, ultrasonic nebulizers, step counter

LCD Monitor, Computer cable, networking hardware, DVD Writer

CRT / LCD Monitor

monitor, Computer

Open Frame LCD Touch Monitors, surface acoustic wave touch screens

Surgical Medical Grade Monitor, Laparascopic Instrument, endoscope system

cd rom, RIBBONS

Multi Para Monitor

monitor, Computer Smps

Machine Vibration Monitor, flow cup, gripwel precision jack screw