Monitors Dealers in Pune

Rugged two wheel trailer Easily maneuvered by two persons or pulled behind light truck or jeep Monitor of 3", 4" or 6" size can be mounted with water supply manifold Over run and manual brake Four stabilizer legs for added safety Low profile design for safety and stability Trailer equipped with reflector Provision of manifold having 2.5" or 4" BSP coupling at rear side of trailer for water supply to monitor from hydrant network Aluminium chequered plate on trailer bed Epoxy painted

We are offering capnotrace monitor. Features * waveforms on high-resolution color tft display. * graphical & tabular trends. * in-built rechargeable battery. * portable & easy to carry. * available in 7� screen size.

LCD Display Resolution Support: VGA, SVGA, XGA, SXGA Use with Stand Alone DVRs VGA and DVI video inputs BNC Video Input for surveillance applications

Protocontrol make zero speed switch series: esm is designed for indication & monitoring of rotational speed of the drive used on machines like crushers, conveyors, centrifuges, mixers & agitators. The speed monitor which uses non-contact sensor like inductive, capacitive, magnetic or optical proximity switch to sense the speed & actuates a relay at preset speed. Using contacts of this relay desired control action such as zero speed protectionunder speed protection over speed protection under & over speed protection can be achieved. The model with digital display facility normally indicates actual speed of the equipment. Speed monitor displays set speed when push button is pressed. Hence accurate speed setting is possible. The op is in the form of 2co relay contacts. Speed range from 1 to 6000 rpm using inductive proximity switch as a sensor & 500-5000 rpm using magnetic or optical sensor can be covered in six ranges the enclosure for monitoring unit is panel-mounting type ip 30. A special sturdy cast al enclosure suitable to ip 65 grade can be provided when the when the unit is required to be field mounted. Supply voltage to the control unit is 240 v ac, or as per requirement. Special features such as direction sensing, multi range model, differential or slip speed monitoring are also available. Versions substitute to imported one are also available.

The IM(X) 12-CCM (Cabinet Condition Monitoring) can be installed and even retrofitted in virtually any cabinet or any protective enclosure to continuously check the current protection degree offered. The DIN rail device issues a switching signal to indicate incorrectly closed doors and limit value violations for temperature and internal humidity to the control system.

We are offering carbon dioxide monitor model km 601 measures co2, temperature, humidity, and dew point. It is a portable multifunctional tester. Unlike chemical gas sensors the last for few months and must be replaced, km 601 uses non-dispersive infrared diffusion sensors (ndir) which has the long time stability and long life characteristics.

LCD Display Resolution Support: VGA, SVGA, XGA, SXGA Use with Stand Alone DVRs VGA and DVI video inputs BNC Video Input for surveillance applications

Measuring the most feeble foetal heatrate, slightest foetal movement and minor uterine contractions accurately, our monitors enable highest degree of care and monitoring. With the infant mortality rate in India standing at 39, WHO reveals that a startling 36% are due to complications associated in premature births. BPL’s range of foetal monitors ensures to monitor the foetus and the mother and screens complications at an early stage. Large displays and memory storage with flexible and user-friendly designs lend themselves for easy use and utmost safety for the mother and the foetus. Twins can be monitored in a perfectly crafted environment that can also be integrated to interface with the central nursing systems.

The Met One Instruments Model BAM-1020 has longstanding U.S. EPA designation as a Federal Equivalent Method (FEM) for continuous PM10 particulate monitoring. In addition, the BAM-1020 is the world’s first instrument to obtainU.S. EPA FEM designation for continuous PM2.5 monitoring, when configured with the specified settings and accessories. The BAM-1020 has also obtained corresponding certifications in other countries and regions.   Features • U.S. EPA Federal Equivalent Method for PM10 and PM2.5 monitoring• Long term unattended remote operation of up to 60 daysbetween site visits• Very low operating costs• Automatic hourly span checks• Fast and easy field audits using common FRM audit tools• Bench top or equipment rack mounting in mobile orstationary shelters• Rugged anodized aluminum, stainless steel, and bakedenamel construction• Highly accurate, reliable, and mechanically simple flow system• Hourly filter advances minimize effects on volatile compounds• Advanced Smart Heater technology precisely controls samplerelative humidity• Integrated datalogger allows the connection of up to sixadditional meteorological sensors• Internal memory provides up to 182 days of digital data storage• Data retrieval through RS-232 serial ports using direct PCconnections, modems, printers, or digital data collection systems

Special LCD Monitors designed to be integrated into your kiosk or other enclosure easily. They do not have the usual plastic cabinet to restrict your touch screen or kiosk application. Open Frames are available with mounting brackets and can be simply installed into a kiosk just by tightening the screws. These are available with integrated Capacitive touch screen in 15" and 17" sizes.

Superior Sensitivity of 0.5 pF is standard - Economical, Versatile Point Level Bin Monitor - Simple Electro-Mechanical Operation - Rugged Cast Aluminum Construction Jayashree line of rotary paddle bin monitors consists of the most reliable, rugged and economical point level control sensors available for detection of dry bulk materials. These easy to install units are proven performers in a wide variety of bulk materials. These paddle units can be used to eliminate bin overflow, maintain a predetermined material level, indicate plugging of conveyors and pneumatic lines or provide any of a number of level control functions. Unlike many other available paddle units, Jayashree's paddle level indicators incorporate a feature that automatically shuts off the motor of the unit when the paddle is in a stalled position, which both extends the life of the motor and minimizes maintenance.

TSM is a state-of-the-art metrology product line for thin film PV manufacturing lines. Approved for in-situ integration by leading PV developers, TSM products push the metrology performance envelope for robustness, reliability, and cost implementing flexible fiber coupled sensor architecture. With optimized optics enabling high tilt and roughness tolerance and simple yet powerful spectral detectors, cost is minimized at a MTBF >10,000 hours. The TSM product line is offered in several configurations for a broad range of applications. UV-Vis reflectometry for buffer and TCO layers thickness and composition measurement. Near Infra-red reflectometry for CIGSCdTe thickness and composition measurement NIR-base photoluminescence for CIGSCdTe band gap analysis.

Main Features:Smart and fashionable designHigh sensitive and stable functionCompetitive priceCE,FCC certificated Applications:Widely used in the POS, VOD system and the place which needs touch screen function     Detailed Description:Display ratio: 4:3 Pixel pitch: 0.285H*0.285VMax.resolution: 1920*1080/60HZ number of colors: 16.7MBightness: 550cd/m2 Dynamic contrast atio: 1000:1Response time:5ms Humidity:1000,000 timesTe smallest touching object： >2.5mm(Dia.)Durable years :> 7yearsDisplay mode:VGA/TV/SVGA/XVGAPower supply： PS/2 connection / USBSignal input:Analog RGBTouch mode: Resistance touchInstallation：desktop/standard VESA

We offer cimco machine monitoring. This is a system which monitors performance of a machine tool on-line. The status is displayed on a remote computer. Various productivity reports can be generated. The system can be interfaced with all types of machines tools including all cnc machines. The data can be captured on 24 x 7 basis.

Range : 200-240 V ..... 1.1 kW - 45 kW 380-480 V ..... 1.1 kW-1000kW 525-600 V ..... 1.1 kW - 90 kW 525-690 V ..... 45 kW - 1,4 MW Enclosures IP20/chassis, IP21/NEMA 1,IP55/NEMA 12 and IP66/NEMA 4X HVAC features Auto tuning of the PI controllers With auto tuning of the PI controllers, the drive monitors how the system reacts on corrections made by the drive - and learns from it, so that precise and stable operation is achie ved quickly.

5 Wire & 4 Wire Resistive Touch TFT-LCD Monitors:  Resistive and 3mm tempered glass options.  Desktop Stand or wall mounting chassis Stable and Long Touch life 12V Input & VGA/DVI interface Features Introduction:This OEM touch monitor families are a flat LCD display with the wide-view angle and the most cost-efficient type. The series of monitors are designed and developed for the application of POS Display, Computers, Data Application, Industrial Control, Medical Equipments, Media Display and Transportation. They provide all the features, such as to support touch screen (Resistive) and VGA signal. With the friendly OSD and multi-languages support, users can freely operate the series of products without struggling. To touch the screen with a finger, fingernail or object such as a credit card and you will receive a fast, accurate response every time.  Specification: I/O Ports VGA Input: 15 Pins D-Sub x1. Plug & Play VESA DDC1/2B Compatible Support. OSD Control Keys: Auto-Adjust, World wide Language menu, decrease and increase. Functions: Brightness, Contrast, Clock, Phase, Horzontal Position, Vertical Position. Power Consumption 25W max. Power 12V Power supply adapter. Net Weight TBD.  Environment: Operating Temperature - 0~40°C Storage Temperature - 20~60°C for standard LCDs Humidity 10~90% non-condensing EMC Approved CE, FCC Safety Approved UL  Display: Size 12.1, 15.1, 17.1, 19.1 availabled Resolution(pixel) SXGA (1024 x 768) Mode TN Response Time(ms) 8 Number of Colors 16.2M View Angle(H/V) H:150° / V:130° Brightness(cd/m2) 250 nits Contrast Ratio 400:1 Lamp Lift(hours) 40,000  * All Touch specifications are subject to be changed without notice.Touchscreen: Type 4-Wire Resistive 

Motion-resistance against any patient movement. It can accurately detect pulse rate of patient with low perfusion. Compact and simple tabletop design. Intuitive operation and easy-to-see bright display. Superior performance and competitive price.

The dust concentration is measured depending upon the amount of light blocked by suspended articles in exhaust gas. Advanced techniques are effectively used to detect & compensate for errors due to ambient light as well as stationary dust giving accurate emission readings. Unique design of Swirling Chamber ensures effective cleaning of lenses.