Multiple Effect Evaporator Dealers in Pune (11 products available)

• Automatic Grade: Automatic
• Capacity: Custom
• Design: Standard, Customized

Fenix designs and manufactures efficient and elegant multiple effect evaporator (mee) at a low cost. Mee is an equipment system for efficiently using the heat from steam to evaporate water. In mee, liquor is boiled in a sequence of vessels, each held at a lower pressure than the previous vessel. Because the boiling point of water decreases with decreasing pressure, the vapour boiled off in one vessel can be used to heat the liquor in the next vessel and so on. Therefore only the first vessel at the highest pressure requires an external source of heat. In theory, evaporators may be built with very large number of stages. Evaporators with more than four stages are rarely practical except in systems where the liquor is the desired product. application: sodium hydroxide concentration of sugar solutions to very high solids content removal of water from soaps finishing concentration of some purees (apple, banana) removal of solvents from vegetable oils lignin solutions high concentration gelatin etc. warranty : process performance is guaranteed by us for 6 months post-commissioning.

We offer a system comprising of Thermovapour re-compressor (TVR), Feed pre-heaters, Condensate flashing to reduce the steam consumption & thus achieving higher steam economy.Properly selected & designed scheme,adequate heat transfer area at best operating temperatures ensures the plant performance for longer time and reduces CIP frequency & plant stoppages.Easy & quick CIP facility for the plant, Fully automated and manual operation mode as per requirement, MOC as required. Complete turnkey plant package comprising of, Calendrias, Pre-heaters, Vapor-liquid, TVR, separators , Pumps, Hardware, Piping, Vacuum system Cabling , Instrumentation & Control Installation, Commissioning and Good after sales services.                                                                We offer all sizes and all type of evaporators namely, Falling film  Forced circulation,Scrapped surface Crystallize Evaporator in effective combination with Multiple effect evaporation system. Optimum number of effects in combination with falling film and forced circulation offered by us ensures least operating cost at the balance of capital cost. Salient feature of the System Offered by “CENTPRO” Offers various thermal methods for complete Zero Liquid Discharge Solution Selection of correct process scheme based on the type of effluent Every ZLD system is a unique designed and custom made to suit the effluent type Lower capital and operating costs Highly energy efficient Useable evaporative condensate generation from effluent Effective use of combination of Falling film & Forced circulation in multiple effect evaporator with Thermovapour recompressor (TVR), Feed preheating and Condensate flashing system to achieve highest steam economy. Removal of solvents from high COD stream using stripper column Dry powder / baggable solids are produced in uniquely designed dryer / ATFD plant Proper implementation of ML recycle system + Centrifuge for salt recovery Proper designed thus less cleaning frequency & Plant Stoppages Easy accessibility and less space requirement Minimum manpower required and user friendly plants Available in both fully automated and manual operation mode In house state of art manufacturing facility and quality control. All equipments are manufactured as per international codes and quality standards to meet specific needs

A multiple-effect evaporator is an apparatus for efficiently using the heat from steam to evaporate water. In a multiple-effect evaporator, water is boiled in a sequence of vessels, each held at a lower pressure than the last. Because the boiling temperature of water decreases as pressure decreases, the vapour boiled off in one vessel can be used to heat the next, and only the first vessel (at the highest pressure) requires an external source of heat. While in theory, evaporators may be built with an arbitrarily large number of stages, evaporators with more than four stages are rarely practical except in systems where the liquor is the desired product such as in chemical recovery systems where up to seven effects are used. An evaporator is essentially a heat exchanger in which a liquid is boiled to give a vapour, so that it is also, simultaneously, a low pressure steam generator. It may be possible to make use of this, to treat an evaporator as a low pressure boiler, and to make use of the steam thus produced for further heating in another following evaporator called another effect.

• Material: Stainless Steel, Mild Steel
• Application: Process effluents,RO reject,Pharma,Dyes,Tannery,Textile,distillery etc.
• Country of Origin: Made in India
• Capacity: 150 m3/hr
• Automation Grade: Automatic
• Working Mode: Steam / Thermic Fluid / Electric
• Power: 14 HP

• Material: Stainless Steel
• Usage/Application: Effluent Evaporation
• Capacity: 500LPH,1000LPH,1500LPH,2000LPH,3000LPH,5000LPH
• Treatment Stages: Single stage
• Automation Grade: Automatic
• Design: Standard
• Max Temperature: 80 Deg C

Multi Effect Evaporators, Evaporator, mechanical evaporator

Multi Effect Evaporators, Food Processing Equipment, Fly Ash Disposal System

Multi Effect Evaporators, Industrial Heat Exchangers

Multi Effect Evaporators, Chain Conveyors, Spray Dryer, paddle dryers

multiple effect evaporators, Saddle Packing Rings, Falling Film Evaporators