Pressure Vessels Dealers in Bhosari, Pune

Features: suitable for single gun stainless steel rust proof pot clamping arrangement with ptfe gasket to avoid jamming due to two component paints safety valve to evacuate excess pressure bend outlet tube in nylon to use even last 20cc of paint substitute for suction pot and gravity pot of the spray gun.

Satyam has extensive experience in the fabrication and welding of Inconel and other nickel-based alloys including Inconel 625, Inconel 718. Inconel is a nickel-chromium-molybdenum alloy designed to resist a wide range of severely corrosive environments, pitting and crevice corrosion. This nickel steel alloy also displays exceptionally high yield, tensile, and creep-rupture properties at high temperatures. This nickel alloy is used from cryogenic temperatures up to long term service at 1200° F.   One of the distinguishing features of Inconel 718’s composition is the addition of niobium to permit age hardening which allows annealing and welding without spontaneous hardening during heating and cooling. The addition of niobium acts with the molybdenum to stiffen the alloy’s matrix and provide high strength without a strengthening heat treatment. Other popular nickel-chromium alloys are age hardened through the addition of aluminum and titanium. This nickel steel alloy is readily fabricated and may be welded in either the annealed or precipitation (age) hardened condition.   Types :  Inconel 718, Inconel 600, Inconel 601, Inconel 625.     Application : This superalloy is used in a variety of industries such as aerospace, chemical processing, marine engineering, pollution-control equipment, and nuclear reactors.  

Supplier & Manufacturer of Pressure Vessel & Shells for Pressure Vessel. Our product range also comprises of Fabrication, Tank and Base Frames. These Pressure Vessels are fabricated using superior grade basic material to ensure their compliance with defined industry standards.

Abhijeet Enterprises well facilitated infrastructural unit enables us to make a highly qualitative Pressure Vessel, which is developed by making use of excellent quality components. Features: Easy to use Quality tested Robust construction

Unit included: total 2 Gas Induction Reactor (MOC:SS316) of 1000 litre capacity, Operating Pressure: 2 - 10 bar.g, Operating Temperature: 60°C,500 Litre caustic solution vessel, Automatic solidliquid separation type filter, Unit also included Air compressor, dryer, chiller, PC-PLC based control System.

We offers a technically advanced product with assured performance in process column for solvent purification by distillation or solvent recovery by absorption. available in specific mass transfer surface areas (m2/m3) of 60,125,250,350,500 & 750. material of construction: ss 304/304l, ss316/ 316l, duplex,904l,alloy 825, haste alloy etc.

We have our own fully integrated with latest manufacturing technology facility for designing & manufacturing for Water Softners, Filter Vessels, DM Plant Vessels available in different MOC like MSEP, MSRL, MSFRP & SS.

Unlike competitive designs with MSRL pressure vessels Chemion Engineering Industrial mixed bed deionisers are built entirely with FRP pressure vessels which are resistant to corrosion which is one of the major causes of failure. The feature is a Single lever operated multiport valve op-eration as against 16 valves for other designs making the operation very easy and eliminates human error associated with normal and regeneration process.

The FRP chemical storage tanks and FRP acid storage tanks manufactured by us is known for features such as chemical and acid resistance, good mechanical strength and durable. The dual laminate tanks offered by us are manufactured using thermoplastic sheet, which is rolled on wooden mould. Further, these are welded at seams and then coated outwardly with suitable FRP resin along with mixture of different glass strengthening (Hand lay-up). The PP and PVC sheets used in our tanks acts as chemical barrier and are in contact with acid. Furthermore, FRP glass fiber reinforced polymer (resin) gives potency required to hold bulk volumes of acids. The thickness of bottom knuckle radius of the tank is doubled as per ASTM 4097 D norms. We offer these in standard and customized options as per clients’ requirements.

In deaeration, dissolved gases, such as oxygen and carbon dioxide, are expelled by preheating the feed water before it enters the boiler. All natural waters contain dissolved gases in solution. Certain gases, such as carbon dioxide and oxygen, greatly increase corrosion. When heated in boiler systems, carbon dioxide (CO2) and oxygen (O2) are released as gases and combine with water (H2O) to form carbonic acid, (H2CO3).   Removal of oxygen, carbon dioxide and other non-condensable gases from boiler feed water is vital to boiler equipment longevity as well as safety of operation. Carbonic acid corrodes metal reducing the life of equipment and piping. It also dissolves iron (Fe) which when returned to the boiler precipitates and causes scaling on the boiler and tubes. This scale not only contributes to reducing the life of the equipment but also increases the amount of energy needed to achieve heat transfer.   THERMIN ENERGY SYSTEM design, manufacture, erection and commission Tray Cum Spray Type De-aerator.

We provide an exclusive range of Pressure Vessels which are manufactured using premium quality material. Keeping in mind the specific requirements of the end users, our range of pressure vessels are highly capable of holding gases or liquids at a pressure different from the ambient pressure. As a prominent company, we are occupied in manufacturing and supplying a wide assortment of Pressure Vessel. This vessel is extremely capable of holding liquids or gases at a pressure different from the ambient pressure. Offered vessel finds its broad applications in fertilizers, oil, petrochemical and paper industries. This vessel is remarkably commended by our clients for its outstanding features.

We are trusted name in manufacturing Pressure Vessels, which are made of either MS or SS. These pressure vessels are kind of closed container, which have been designed well to hold gases or liquids at a pressure different from the ambient pressure. We are providing complete customization on our product as per the specification of the client. We sincerely go through the deign specification provided by the client' side so that the requirements are well satisfied.

Storage Material Water Orientation Vertical Orientation Warranty Manufacturing defects Usage/Application Water Purification Automation Grade Semi-Automatic Shape Type Cylindrical Material FRP Brand Bluemaarlin Leveraging the skills of our qualified team of professionals, we are instrumental in offering a wide range of FRP Pressure Vessel.

The corrugated metal sheets of structured packings provide a number of advantages compared to random packings and distillation trays. These packings offer high efficiency , excellent throughput, low pressure drop and a very broad application area.

Our Jacketed Pressure Vessels have a superior construction. They are designed for optimum performance. They are easy to operate and have a long service life. These Pressure vessels are jacketed to suit particular work requirements. These Jacketed Pressure Vessels are offered at market leading prices. Constructional Details Jacket closure Ring Welding work is done by using high grade filler rods which can withstand the closure ring tensionInner shell of jacket which is present in between inner shell and outer jacket to intensity main vessel and offers uniform circulation and minimizes stagnation of heating or cooling mediumWelding work is done with Argon Arc process and using good characteristic filler rods on all S.S. partsMS parts welding by D.C. Arc welding process with suitable electrodesDrive system is specifically planned for trouble free operation Available In Various Types Limpet CoilJacketed body flange or welded type Applications ChemicalFood industryDrugs Dyes and other industries Available in Capacity ranging from 100 LTS to 20, 000 LTS Materials like SS , MS