Science Laboratory Equipment Dealers in Pune

Provides near real time warning capability for biological aerosol threats Validated with over 1.3 million hours of run time in relevant environments Alert can automatically trigger a particulate sampler for subsequent identification Unattended 247 operation without consumables Complete self-diagnostic system Easily integrated with most facility monitoring and Light weight and low Power In-service with DRDO projects such as Un-manned Vehicles, Shelters Close

roof-mounted pantographs for tramways, trains, special vehicles, suburban railways, metros, traction units (emus) and locomotives are developed for different overhead line-systems and speeds, whereas the raising to and lowering from the overhead line is realised by an electrical or a pneumatic drive acc. to customer’s requests. the continuous contact force to the overhead line at higher speeds is realised either by mechanical aero foils or by an especially developed electro-pneumatic control. if requested an emergency dropping device is quoted which lowers the pantograph as quickly as possible at collisions with the overhead line.

SPECIFICATION: The apparatus shall consists of blower unit fitting with test pipe (test section approx.400 mm length 20mm dia approx.) Heat flux shall be given to pipe by an electric heater (niehrome wire) through a variance. Control panel shall have standard make digital voltmeter (0-300v), digital ammeter (0-2amp), digital temperature indicator (0-300, 0cwith malt channel switch, RTD PT 100 or copper constant thermocouple type temperature sensors (06 no, or more), suitable heater, variance, main indicator and on off switch . a good quality painted rigid MS structure should be provided to support all the parts.

A low cost pilot plant, available in various models, the multi-process control trainer is designed to familiarise students with the control of various parameters like flow, level, temperature and pressure. Various control schemes such as feed back, feed forward cascade, ratio, and batch are demonstrated on a single system. This system is PC interfaced. Optionally, an additional discrete PID controller can also be supplied.

Sinewave Engineering Pvt. Ltd. is leading manufacturer of Hydraulic Trainers and we offer 4 models from Basic to Advance PC Based Hydraulic Trainer.   Specification :   Brand: Sinewave Engineering Pvt. Ltd.       Detailed Description   Sinewave offers 4 Models for Hydraulic Trainer. • Basic Hydraulic Trainer which can take care of Basic 15 Experiments.• Electro - Hydraulic Trainer Which can take care of 30 Experiments.• PLC Based Hydraulic Trainer Which can take care of 40 Experiments.• Advanced PC Based Hyraulic Trainer Which can take care of More than 40 Experiments.For Detailed Specifications please contact us on info@sinewaveengineering.comAll the Hydraulic Trainers can be Customised as per the requirement.  

The Profile Projector has innumerable uses in various experiments related to physics. The range of Profile Projectors we offer includes both Horizontal Profile Projector and Vertical Profile Projector. The Optical Profile Projector of our company is a highly sophisticated one as the latest upgraded technology is used in the manufacturing mechanism. Each part is tested several times so as to avoid any kind of flaws. The Profile Projectors meet all the international standards and extend long lasting problem free performance. Besides being among the reputed manufacturers, we have achieved a remarkable position among the Suppliers of premium quality Optical Profile Projector.

The apparatus enables the students to study the interesting phenomenon of heat pipe & to compare its performance with other pipes. The apparatus consists of a heat pipe made up of stainless steel, evacuated and partially filled with distilled water, a copper pipe and stainless steel pipe of same sizes. The pipes are heated at one end and water tank is provided at other end of pipes to take over heat. Thermocouples are provided along the length of pipes so that nearly isothermal operation of heat pipe as compared with other conductors can be demonstrated. Rapid rise of water temperature in tank around heat pipe demonstrates super conductivity of heat pipe as compared to copper and stainless steel pipe. Specifications: Heat Pipe - Stainless steel pipe size 25 mm dia., 300 mm. long with both side closed,evacuated and filled with distilled water. Copper Pipe - 25 mm dia., 300 mm. long. Stainless Steel pipe - 25 mm dia., 300 mm. long. All pipes are positioned horizontal with one end heated by band heater and water tank at other side. Thermocouples are provided along the length to all pipes. Instrumentation & Controls : Digital Voltmeter - 0 - 199.9 Volts. Digital Temperature Indicator. Heater Control. Service Required : 230 V.A.C. stabilized supply with earthing. Floor space - 3.5 m X 1 m at working height.  

Multi Process Control Trainer is the most flexible and modular system in its range. It is meant for studying various control loops used in industrial processes. Fabricated using high quality material, it can be used for elaborating the study of Controlling Different Process parameters like flow, level, pressure and temperature

upskillUtoday is an education promoting startup with a vision to connect the educators and students for crafting successful learning journeys.

Problem: Using MD ADAMS, Find the minimum inclination that will ensure that a crate slides off an inclined plane, the plane has dimensions of 50 in. by 8 in. by 2 in and the crate has dimensions of 12 in. by 8 in. by 4 in. and has a mass of 100 lbs. The coefficient of static friction (μs) is 0.3 and the coefficient of dynamic friction (μd) is 0.25 and gravity is 32.2 ftsec2. Note: If you need assistance on a step, just click on it for more information. Note: Click on images to enlarge.

The EL500 is an advanced digital readout system for performing three axes (two linear and one angular) geometrical measurement at very high level of precision and accuracy.Its precise measurement identifies correct rejections. It reduces operator fatigue and provides faster inspection, enhancing productivity.

We are enlisted among the eminent Suppliers of Profile Projector. The projectors we make available are manufactured in compliance with international quality standards. In order to cater the bulk and urgent requirements of the buyers, we maintain a large stock of these in our spacious warehouse. One can obtain these at affordable rates from us. Details We offer the best optical gauging to meet varied needs of versatility, accuracy and dependability in measurement Profile projects and Tool-Makers microscopes are available in different type and sizes with magnification to 10X to 100X Screen Dia from 300 to 600 available in vertical and horizontal configuration. Clear, Distortions free & correct images. Both contour and surface illuminations Models are available of large loading capacity Digital Read out system also available.

Educational equipment in CNC controllers. It not only involves ladder design but also involves electrical circuit design and understanding. Basic arrangements are provided to distinguish three phase and single phase power supplies. It gives participants necessary confidence and basic understanding of the electrical control panel.

Resin and rubber adopted in wetted parts material, and metal eliminated. ▪ Metal-free small 2, 3-port solenoid valve for chemical liquid compliant with European standards.

‘Educational Equipment Enterprises’ till July 2006. From August 2006 onwards company’s status has been changed to a Private Limited under the name ‘Eternal Engineering Equipment Pvt. Ltd’. We have been manufacturing the SPM (Special purpose machines) along with the Engineering Education Lab. , the Indian engineering industries have been emphasizing on the quality assurance & production techniques to provide products with increased reliability, with a view of global marketing & providing testing & production machines as per the specifications of the concerned company & international testing standards.

A special type of sine bar is sine center which is used for conical objects having male and female parts. It cannot measure the angle more than 45 degrees In the advanced type some holes are drilled in the body of the bar to reduce the weight and facilitate handling. It is available in the range of 0-100; 0-200; 0-300mm