Transformers Dealers in Chakan, Pune

Advantages : Continuous, Step less and Break Less Voltage variation Negligible waveform & Power factor distortion Short Time Overload Capacity Renote operation possible SPECIFICATIONS Load Capacities 28 amps to 600 Amps in Single • and 28 Amps to 1000 Amps in Three • 28 Amps, 40 Amps, 60 Amps, 100 Amps, 200 Amps, 400 Amps, 600 Amps, 800 Amps, 1000 Amps ) Phase Single • and Three • Toroidal Coils with CRGO Steel Sheet Core Frequency 50 60 Hz. Voltage Variation Capability 0 - 270 V A.C in Single • and 0 - 470 in Three • Cooling Method AN for 28 Amps in Single• and Three • Oil Cooled for 40 Amps to 600 Amps in Single • Oil Cooled for 40 Amps to 1000 Amps in Three • Drive Mechanism Hand Driven with Knob Motor Operated with Step Syncronised Motor Compliance to test Standards IS 5142. Oil Confirming to IS 335 Copper Conductors Compliant to IS 13730 - 34 BASIC FEATURES Open Type for Panel Mounting Portable Type for Table Mounting M.S. Tank with Oil Immersed and Pressed Steel Radiators. Double varnished Toroidal Coils. Voltage Indicator Dial. Knob or Wheel for Voltage Variation Connector Plate or Bus Bars in cable box. High Quality Carbon Brushes.

Application : Exhaust Gas Recirculation For : PV, SCV,LCV & HCV Type : Feedback Non feedbackApplication : Engine coolant flow control Range : 2Wh 3Wh, PV, SCV, LCV & HCV Type : Internal mounting in engine External mounting

As an affluent entity of this domain, we are affianced in offering the premium quality array of High Vacuum Transformer Oil Filtration Machine in pune india. The machine is also provided with heated evacuation chamber to heat & evacuate the job followed by filling of oil in the job under vacuum. This filtration machine is highly suitable for treating transformer oil by heating and passing it through designed filter. The offered products undergo through varied tests by our skilled professionals before the final dispatch in order to ensure their trouble free operation.Features: Supreme operational fluency Reliable structure Superior finish  

Pioneers in the industry, we offer Low Voltage Capacitor such as Normal Duty Capacitor and Reinforced Capacitor from India.

Electric transformers perform best when the insulating oil is devoid of moisture, dissolved gases and unwanted particles. Even new oils require some treatment to limit these contents to suitable levels. Contaminated oil loses its characteristics of dielectric strengths, resistivity and loss factor. Excessive moisture leads to acid and sludge formation.

With sincerity and hard work, we have carved a niche for ourselves by offering a wide gamut of Three Phase Isolation Transformer to our clients across the globe. The offered product range is widely used for decoupling two circuits. Further, the offered equipment allows AC signals to pass and blocks the DC signals. Moreover, our offered range can be availed in a wide range of specifications, as per the requirements of our esteemed clients. Features: Compact design Durable Dimensional accuracy

Operating from Pune(India), we are instrumental in offering the wide array of products to the customers. Catering to the ever-evolving packaging requirements of the clients, we make certain that our professionals use only the finest packaging material to circumvent loss during transit.

• Frequency: 50-60 Hz
• Brand: VCS
• Phase: Single,Three Phase
• Current: 10 Amp
• Input Voltage: 240-415 V
• Output Voltage: 270-470 V

• Type: Transformer
• Voltage: 220 - 415v
• Working Pressure: 0.06 - 0.09 mpa
• Capacity range: 500 lph to 20,000 lph
• Flow: 50-300 l/m

We can supply you Rubbesrised Cork in strip form. This strips are available length of 25 meter & 50 meter Rolls. This strips are manufactured from high-quality granulated "cork", directly imported from reputed manufacturer in "Portugal", combined with "virgin" selective polymers ensuring uniform dispersion & consistent properties conforming to customer requirements using internationally acclaimed high quality environment friendly processes.

ADVANTAGES Isolate primary winding and secondary windings. Provides isolated neutral. It protects micro processor based equipment from dangerous noises and reduces drive failures. It can be useful where machine earth can’t be used. By Providing Delta star isolation transformer, where there is problem of earth or neutral in the input side is taken care for the safety operation of the load by this Isolation transformer. It arrest the noises of high frequency and noises generated by the usage of high current MCB,ACB, Induction furnace or other electromagnetic noises.

• Brand Name: Lubrall
• Application: Industrial
• Packaging Type: Barrel/Drum
• Packaging Size: 150-210 Litre
• Form: Liquid

The Transcure BS series are single stage streamline transformer oil filtration machine. Transcure BS series of Transformer oil filter machine is designed to tame oil problems in the LT distribution transformer sector. The practical experience of transformer oil filter machines used for repairing distribution transformer has led to development of TRANSCURE BS series which is dedicated to handle small oil volumes. Typical capacities are 100 LPH ~ 500 LPH; 1000 LPH~2000 LPH, 2250 LPH & 3000 LPH.

​We manufacture of all kinds of Wound Components including Inductors, Ferrite Core Transformer Encapsulated Transformers, Toroidal Transformers, Ferrite Transformers, Coils etc

We are offering Single Phase Transformer.Specifications: Type : 1 KVA Single Phase Primary & Secondary Voltage : As per Customer Requirement Frequency : 5060 Hz Core Lamination : CRNO CRGO Wire : F Class Copper Bobbins : FRP High Voltage Breakdown : 2.5 to 3.5 kV as per standard for 1 minute Insulation resistance : More than 100 M ohms Terminal Connection : Touch Proof Overload Capacity : Minimum 10% Size : H-185 mm L-180 mm W-130 mm Weight : 11.270 Kg. App.

Our products have the largest satisfied customer base. Dedicated to providing environment friendly quality solutions and commitment to delight customers with unique value propositions.

• Phase: Three Phase
• Brand Name: NTS
• Country of Origin: Made in India
• Power: UP TO 300 KVA
• Voltage: 415 V
• Usage/Application: INDUSTRIAL AND COMMERTIAL
• Ambient Temperature: -25
• Cooling Type: DRY TYPE

Isolation Transformers, which often has symmetrical windings, is used to decouple two circuits. An isolation transformer allows an AC signal or power to be taken from one device and fed into another without electrically connecting the two circuits. Isolation transformers can be used to block transmission of DC signals from one circuit to the other, but allow AC signals to pass. They will also block interference caused by ground loops. Isolation transformers with electrostatic shields are used for power supplies for sensitive equipment such as computers or laboratory instruments.A 3 phase transformer, there is a three-legged iron core as shown below. Each leg has a respective primary and secondary winding. Thus a 3 phase isolation transformers is a 3 phase transformer which has isolated primary and secondary windings to allow the power input to be isolated from the power output.

Capacity range upto 200 KVA 3Ph   ParticularStandards System Connections Delta/Star Input Voltage 415V 3Phase Ratios 1:1 and 2:1 Regulation Better than 3.5% Output Voltage 415V or 200,220V 3Phase Di-Electric strength 3KV for 60 Sec Insulation Resistance Better than 1000 Mega Ohms Power Factor 0.75 Lead to 0.75 Lag Construction Standard as per IS 20126 Part I & II, IS 11171 Comman Mode Attenuation 100 db/120 db Coupling Capacitance 0.1 PF for 80db Leakage Current Less than 20 Micro Amps Type of Execution Closed Type Operating Temp. 0 degree celcius to 45 degree celcius Type of cooling Natural Air/ Forced Air Oil Cooled (Optional)   • Eliminates stresses that come from normal electrical transients.• Meet stringent clean power requirements of the sophisticated / sensitive equipments.• Reduces the effects of power line problems like Noise, Spikes, Surges, Transients and Neutral to minimum.

We have in-house facility to manufacture ferrite core Transformers and Coils. This is done more particularly to keep tighter tolerances on quality parameters on the magnetic parts for our captive consumption.  

oil cooled power transformers, Battery Chargers, Ultra Isolation Transformers

Salient Features:-1. Regulator Welding Machine :-  These machines have both single & two phase system. High class insulators. Smooth Welding, Low Power consumption with low noise. Suitable for all types of jobs. Working capacity :- 8 to 10 hrs. continues. 2. Stud Type Arc Welding Machine :- These are portable size machines. Made with new technology used by double holder. The waving voltage power can be adjusted high or less. High class insulators. Smooth Welding, Low Power consumption with low noise. Suitable for all types of jobs. Working capacity :- 8 to 10 hrs. continues. 3. Mini Arc Welding Machine These are light weight compact machines. Manual based machines. Single phase machines. Easy to carry for using in factory and sites too. Smooth welding, Low Power consumption with low noise Suitable for all types of light jobs. Working capacity :- 6 to 8 hrs. continues.

• Phase: Single Phase
• Packaging Type: Box
• Power Source: Electric
• Frequency: 50-60 Hz

Current transformer manufacturers (L.T.) use steel silicon ring core wound with copper wire wounds. As copper is a good conductor of electricity, it helps in easy flow of electricity. Winding is a necessary part of current transformers. Winding is done with copper wire core to supply electricity. Its opening in centre enables its accuracy. Current transformers shapes and sizes depend upon the uses. Low voltage meters are either of ring type or plastic moulded case. In no case, should one use a low voltage current transformer in situations where there are chances of high voltage through circuits and fluctuation which may result in fire or electrical shock.

• Color: Black, Grey
• Voltage: 110V, 220V
• Condition: New
• Power: 12-15kw, 3-5kw, 5-7kw, 7-9kw, 9-12kw
• Application: Oil Filteration
• Automatic Grade: Automatic
• Driven Type: Electric
• Warrenty: 1year, 2years
• mobile type: stationary
• single stage: multi stage
• PLC based: Skid mounted

• Brand Name: Excel Enclosures
• Material: Aluminium
• Height: 300 mm-2200 mm
• Width: 300 mm-2000 mm
• Features: Decorated monitor compartment, Monitor tray adjustable in height
• Usage/Application: Power Stations, Industrial
• Base: 50 mm-300 mm
• Depth: 300 mm-1500 mm
• IP Rating: 67

• Type: KZE3-XS
• Safety Contacts: 3
• Safety Level: depending on main relay
• Power Supply Voltage: 24 V AC/DC

Supply Voltage 10 A / 50 mA 25 A / 50 mA 50 A / 50 mA 100 A / 50 mA